OKI MB480 User Manual

11 • Overview
   
5. Paper tray
MB460 MFP/MB470 MFP: Holds up to 250 sheets of 20 lb. US Bond (75g/m²) 
paper.
MB480 MFP: Holds up to 530 sheets of 20 lb. US Bond (75g/m².)
6.  Paper level lever  
To visually indicate the paper level in the tray.
7.  ON/OFF power switch
Refer to “Switching Off” on page 19 for details.
8.  Scanner Bed
9.  ADF ( Automatic Document Feed) unit
10.  ADF (Automatic Document Feed) paper tray
Holds up to 50 sheets of letter/A4 si ze paper, 20 lb. US Bond (75 g/m²).
11....

12 • Overview
Rear View
13. Access panel
Allows access to install optional memory.
14.  Duplex unit
Provides automatic two-sided printing.
15.  Rear output cover (closed) (face up stacker)
This is mainly used for heavy print medi a. When used in conjunction with the 
multi purpose feed tray, the paper pa th through the MFP is essentially 
straight. This avoids bending the prin t media around curves in the paper 
path.
16.  AC power socket
17.  Parallel connector
18.  USB connector  
19.  Test switch
20....

13 • Overview
Control Panel      
1. Key Pad
Used to enter numbers, upper-case/lower -case letters and symbols in the Entry 
Line. Refer to “Character Switching” on page 16 for further details.
2.  Left Key
When in Switching mode: Returns the disp lay to the Function Selection screen or 
Scan Sub Function Selection screen from the Stand-by screen.
When Setting up: Increments th e value of the tree structure.
3.  Down Key
When setting up or in switching mode: Moves the cursor down.
4.  Right Key
When in...

14 • Overview
 
6. Enter Key
When in Switching mode:
• Used to confirm the Mode selected.
• Used to start Push Scan (If Push scan  is selected, the Executing Push scan 
screen is displayed.)
When Setting up:
• Increases/decreases the va lue of the tree structure.
When entering Pin ID:
• Used to confirm the PIN ID entered.
When in Error/Warning State
• Used to recover.
7.  One Touch Key Panel (MB470 MFP & MB480 MFP only)
The One Touch keys (7a) are used to di al numbers from #00 to #09 that you 
have...

15 • Overview
9. Stop Button:
• Stops the function being executed (Copy, Scan, etc._).
• Cancels a Print job.
10.  Liquid Crystal Display (LCD):  128 x 64 dots.
Downloaded From ManualsPrinter.com Manuals 

16 • Overview
Character Switching
Numbers, upper and lower case letters and symbols can be entered using the keypad. 
Press the key multiple times to switch between characters.
The example below is based on English being the display language:
KEYTo scan through the choices for each key, you must press the key 
rapidly: within 2 seconds of the previous press.
1 1 →  1
2 a →  b  
→ c  →  A  →  B  →  C  →  2
3 d 
→ e  → f  → D  → E  → F  → 3
4 g 
→ h  → i →  G  → H  → I  → 4
5 j 
→ k  → l →  J  → K  → L  →...

17 • Overview
Changing the Display Language
The default language used by your MFP for display messages and for report printing 
is English. If required, this can be ch anged using the Panel Language Setup utility.
•English
• Canadian French
• Latin American Spanish
• Brazilian Portuguese 
Note
See the information enclosed on the CD-ROM included with your unit 
(the Panel Language Setup Utility) for the procedure for changing the 
language.
Downloaded From ManualsPrinter.com Manuals 

18 • Getting Started
Getting Started___________________
Releasing the Scanner Lock 
1.Open the document cover.
2. Move the scan lock lever (1) to the UNLOCKED position.
Power Save Mode
If you do not use the MFP for a while, the machine will enter the power save mode to 
control the power consumption of the device. 
Caution!
Make sure the scanner is in the UN LOCKED position before operating.
Downloaded From ManualsPrinter.com Manuals 

19 • Getting Started
Switching Off 
1.Press the down arrow button on the control panel to highlight Menu. Press Enter.
2. Press the down arrow button on the control panel to highlight System Shutdown. 
Press Enter.
3. Press Enter to execute.
4. At the prompt, turn the power switch OFF.
Caution!
Do not turn off the power switch sudd enly as this may damage your MFP. 
Downloaded From ManualsPrinter.com Manuals 

20 • Getting Started
Installing Drivers and Utilities
Your machine is supplied with the following drivers:
• TWAIN (scanner) driver: Windows only, USB only 
• Printer driver: PCL5e (all models), PCL 6 (all models), PostScript3 (MB470 MFP & 
MB480 MFP only)
• Fax driver: Windows only,  MB470 MFP & MB480 MFP only 
The MFP is a “dual device” - Windows sees it  as a scanner and a printer. Therefore, 
you must install two different drivers; the TWAIN (scanner) driver and the printer 
driver.
The installation...