Olympus Camera Tg 620 Ihs Instruction Manual

51EN
Saving battery power between shots Saving battery power between shots [Power Save][Power Save]d (Settings Menu 2)  Power Save
Submenu 2 Application
OffCancels [Power Save].
On When the camera is not being used 
for approx. 10 seconds, the monitor 
automatically turns off to save 
battery power.
To resume standby modeTo resume standby modePress any button.
Changing the display language [Changing the display language [ll]]d
 (Settings Menu 2)  l
Submenu 2 Application
Languages The language for the...

52EN
Restoring data in the cameraRestoring data in the camera[Reset Database][Reset Database]d (Settings Menu 3)  Reset Database
  Playback will become available by performing [Reset 
Database] when the Photo sur fi ng function is not 
activated properly. However, data such as collections 
and other groups created with the ib (PC software) is 
deleted from the database in the camera.
Import the data back into the camera from a 
computer to playback the data created with the ib 
(PC software)....

53EN
PP
0.00.0
MENUMENU12M
AUTOWBAUTOWBAUTOISOAUTOISO
Flash Auto
  Tap the camera fi rmly using the pad of your fi  nger.  When the camera is stabilized on a tripod for 
example, tap control may not work properly.
  To prevent dropping the camera when using tap control, strap the camera to your wrist.
Operating during playback modeOperating during playback modeWhen switched to playback mode by tapping the top of 
the camera body twice, the operations below can be used.
Display next image: Tap the right...

54EN
PrintingPrinting
Direct printing (PictBridge*1)
By connecting the camera to a PictBridge-compatible 
printer, you can print images directly without using a 
computer.
To  fi nd out if your printer supports PictBridge, refer to the 
printer’s instruction manual.
*1  PictBridge is a standard for connecting digital cameras  and printers of different makers and printing out pictures 
directly.
  The printing modes, paper sizes, and other  parameters that can be set with the camera vary 
depending on the...

55EN
To exit printingTo exit printingAfter a selected image is displayed on the screen, 
disconnect the USB cable from the camera and printer.
Changing the printer’s settings for printing [Custom Print]
1  Follow Steps 1 and 2 for [Easy Print] (p. 54).
2 Press the  A button.
3 Use FG to select the print mode, and press 
the A button.
Submenu 2 Application
PrintThis prints the image selected in 
Step 6.
All Print This prints all images stored in the 
internal memory or card.
Multi Print This prints one...

56EN
To make the detailed printer settingsTo make the detailed printer settings1 Use FGHI to select the setting, and press the 
A button.
Submenu 5 Submenu 6 Application

57EN
Print Reser vations (DPOF*1)
In print reservations, the number of prints and date imprint 
option are saved in the image on the card. This enables 
easy printing at a printer or print shop supporting DPOF 
by using only the print reservations on the card without a 
computer or a camera.
*1  DPOF is a standard for storing automatic printout information from digital cameras.
  Print reservations can be set only for the images  stored on the card.
  DPOF reservations set by another DPOF device cannot...

58EN
Resetting the print reser vation data for selected images
1  Follow Steps 1 and 2 in [ 

59EN
Usage TipsUsage Tips
If the camera does not work as intended, or if an error 
message is displayed on the screen, and you are unsure 
of what to do, refer to the information below to fi x the 
problem(s).
Troubleshooting
BatteryBattery“The camera does not work even when batteries are 
installed”.
 
●Insert recharged batteries in the correct direction.
“Inserting the battery and card” (p. 11), “Charging 
the battery with the included USB-AC adapter” 
(p. 12)
 
●Battery performance may have been...

60EN
Error message
  When one of the messages below is displayed on the monitor, check the corrective action.
Error message Corrective action
Card ErrorCard problem
Insert a new card.
Write Protect Card problem
The card write-protect switch is 
set to the “LOCK” side. Release 
the switch.
Memory Full
Internal memory problem
•  Insert a card.
•  Erase unwanted images.*1
Card FullCard problem
•  Replace the card.
•  Erase unwanted images.*1
MENUCard Setup
Back
Format
Power Off
Card problem
Use FG to select...