Olympus Camera Tg 630 Ihs Instruction Manual

41EN
 
● When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
 
● This camera does not support the Eye-Fi card’s 
Endless mode.
 
● Before use, refer to “FlashAir/Eye-Fi card” (p. 71).
 Selecting a method for connecting  Selecting a method for connecting 
the camera to other devices the camera to other devices 
dd [USB Connection] [USB Connection]
Submenu 2 Application
Auto Set to select the connection 
method each time the camera is 
connected...

42EN
Selecting the camera sound and Selecting the camera sound and 
its volume its volume dd [Sound Settings] [Sound Settings]
Submenu 2 Submenu 3 Application
Sound Type
1/2/3 Selects the camera 
sounds (operation 
sounds, shutter sound, 
and warning sound).
Volume
0/1/2/3/4/5 Selects the operation 
volume of camera 
buttons.
q Volume
0/1/2/3/4/5 Selects the image 
playback volume.
 d Settings Menu 2
 Resetting the fi
 le names of  Resetting the fi le names of 
pictures pictures dd [File Name] [File Name]...

43EN
Submenu 2Application
ResetThis resets the sequential number 
for the folder name and 
fi le name 
whenever a new card is inserted.*1 
This is useful when grouping 
images on separate cards.
Auto Even when a new card is inserted, 
this continues the numbering for 
the folder name and 
fi le name 
from the previous card. This is 
useful for managing all image 
folder names and  fi les names with 
sequential numbers.
*1  The number for the folder name is reset to 100,  and the one for the fi  le name is...

44EN
  Playing back images on a TV   Playing back images on a TV dd [TV Out] [TV Out]
  The TV video signal system varies depending on the countries and regions. Be\
fore viewing camera images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Submenu 3 Application
NTSC/PAL NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, 
Japan, and so on.
PA L Connecting the camera to a TV in European countries, China, and 
so on.
HDMI Out
480p/576p
720p
1080i Set...

45EN
Connect to the HDMI 
connector on the TV.
HDMI micro connector 
(type D)HDMI cable 
(sold separately: CB-HD1) Connect to the TV video 
input jack (yellow) and 
audio input jack (white).
Multi-connector
AV cable 
(sold separately: CB-AVC3)
 
● For details on changing the input source of the TV, refer to the TV’s instruction manual.
 
● When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take 
priority.
 
● Depending on the TV’s settings, the displayed...

46EN
 Saving battery power between  Saving battery power between 
shots shots dd [Power Save] [Power Save]
Submenu 2Application
OffCancels [Power Save].
On When the camera is not being 
used for approx. 10 seconds, the 
monitor automatically turns off to 
save battery power.
To resume standby modeTo resume standby modePress any button.
 Changing the display language  Changing the display language 
dd [ [ll]]
Submenu 2
Application
Languages The language for the menus and 
error messages displayed on the...

47EN
 d Settings Menu 3
 Choosing home and alternate time  Choosing home and alternate time 
zones zones dd [World Time] [World Time] 
● You will not be able to select a time zone using 
[World Time] if the camera clock has not fi  rst been 
set using [X].
Submenu 2 Submenu 3 Application
Home/
Alternate x
The time in the home 
time zone (the time 
zone selected for x in 
submenu 2).
z The time in the travel 
destination time zone 
(the time zone selected 
for z in submenu 2).
x
*1— Select the home time...

48EN
Using the LED illuminator as an Using the LED illuminator as an 
auxiliary light auxiliary light dd [LED Illuminator] [LED Illuminator]
Submenu 2Application
OffDisables the LED illuminator.
On Enables the LED illuminator.
To use the LED illuminatorTo use the LED illuminatorPress and hold the  Y button down until the LED 
illuminator lights up.
 
● If you perform an operation when the LED 
illuminator is on, it will illuminate up to approx. 
90 seconds.
LED illuminator
 
● The LED illuminator turns...

49EN
 Connecting with a computer
When [USB Connection] is set to [Auto], connect the 
camera and the computer, select [Storage] or [MTP] 
at the screen for selecting the connection method, 
and then press the A button.
System requirementsSystem requirementsWindows  :  Windows XP Home Edition/Professional (SP1 or later)/
Windows Vista/Windows 7/
Windows 8
Macintosh  :  Mac OS X v10.3 or later
 
● Even if a computer has USB ports, proper 
operation is not guaranteed in the following cases:
 
● Computers...

50EN
 Installing the PC software and registering user
WindowsWindows
1 Insert the supplied CD in a CD-
ROM drive.
Windows XP
 
● A “Setup” dialog will be displayed.
Windows Vista/Windows 7/Windows 8  
● An Autorun dialog will be displayed. Click 
“OLYMPUS Setup” to display the “Setup” dialog.
 
● If the “Setup” dialog is not displayed, select “My 
Computer” (Windows XP) or “Computer” (Windows 
Vista/Windows 7) from the start menu. Double-click 
the CD-ROM (OLYMPUS Setup) icon to open the 
“OLYMPUS Setup”...