Optoma Ds309i Projector User Manual
Have a look at the manual Optoma Ds309i Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English Introduction Remote Control 1. Button LED 2. Power On/Off 3. Laser Button 4. Page Up 5. Mouse Right Click 6. Four Directional Select Keys 7. Re-Sync 8. Page Down 9. Volume +/- 10. Zoom 11. AV mute 12. Video Source 13. VGA Source 14. Freeze 15. S-Video Source 16. DVI Source 17. Brightness 18. Menu 19. Keystone +/- 20. Source 21. Enter 22. Mouse Left Click 23. PC/Mouse control 24. Number Buttons (for password input) 1 10 11 1314 3 2 23 15 16 17 19 20 8 21 22 4 7 189 12 5 6 24
2English Installation Connecting the Projector Due to the difference in applications for each country, some regions may have different accessories. Connect to Computer/Notebook 1...............................................................................................................Power Cord2................................................................................................................VGA Cable3.........................................................DVI-I to VGA Cable (Optional accessories)4...........................................................Audio Input Cable (Optional accessories)5.......................................................................RS232 Cable (Optional accessories)6.................................................................................................................USB Cable 1 324 6 5
3English Installation Connect to Video Sources S-Video Output DVD Player, Set-top Box, HDTV receiver 1...............................................................................................................Power Cord2......................................SCART RGB/S-Video Adaptor (Optional accessories)3...................................................................S-Video Cable (Optional accessories)4............15-Pin to 3 RCA Component/HDTV Adaptor (Optional accessories)5...................................................Composite Video Cable (Optional accessories)6...........................................................Y-Type of Composite to S-Video Adaptor7................................................3 RCA Component Cable (Optional accessories)8...................................................Audio Cable Jack/RCA (Optional accessories) 6 2 3 5 Due to the difference in applications for each country, some regions may have different accessories. 4 Video Output 1 7 8 8
4English Installation Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will be Amber. 3. Turn on the lamp by pressing “Power” button either on the top of the projector or on the remote. The Power LED will flash green. The startup screen will display in approximately 10 seconds. The first time you use the projector, you can select your preferred language from quick menu after the startup screen display. 4. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically. If you connect multiple sources at the same time, press the “Source” button on the control panel or direct source key on the remote control to switch between inputs. Powering On/Off the Projector Turn on the projector first and then select the signal sources. 2Power Lens Cap1 Power LED
5English Installation Warning Indicator When the “LAMP” indicator lights red, the projector will automatically shut itself down. Please contact your local reseller or service center. See pages 54-55. When the “TEMP” indicator lights red, it indicates the pro- jector has overheated. The projector will automatically shut itself down. Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center. See pages 54-55. When the “TEMP” indicator flashes red, it indicates the fan has failed. Please contact your local dealer or our service center. See pages 54-55. Powering Off the Projector 1. Press the “Power” button to turn off the projector lamp, you will see a message displayed on the projector’s screen. 2. Press the “Power” button again to confirm, otherwise the message will disappear after 15 seconds. When you press “Power” button second, the system will show the timing countdown on the screen. 3. The cooling fans continue to operate for about 10 seconds for cooling cycle. When the Power LED turn Amber, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “Power” button to restart the projector. 4. Disconnect the power cord from the electrical outlet and the projector. 5. Do not turn on the projector immediately following a power off procedure.
6English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator foot into position. 3. Use screw in foot to fine-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator feet into position. 3. Use screw in foot to fine-tune the display angle. Tilt-Adjustment FootElevator FootElevator Button 312
7English Installation Focus Ring Zoom Ring Adjusting the Projector’s Zoom / Focus Adjusting Projection Image Size You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters). 68.8(174.8cm) 114.7(291.4cm) 160.6(407.9cm) 206.5(524.5cm) 275.3(699.3cm) 30.3(76.9cm) 75.7(192.3cm) 126.2(320.5cm) 176.7(448.7cm) 227.1(576.9cm) 302.9(769.2cm) 3.9(1.2m) 39.4(12.0m)29.5(9.0m)23.0(7.0m)16.4(5.0m)9.8(3.0m) 27.5(69.9cm) Width Height Diagonal Hd Screen(Diagonal) Max.30.3” (76.9cm)75.7” (192.3cm)126.2” (320.5cm)176.7” (448.7cm)227.1” (576.9cm)302.9” (769.2cm) Min.27.5” (69.9cm)68.8” (174.8cm)114.7” (291.4cm)160.6” (407.9cm)206.5” (524.5cm)275.3” (699.3cm) ScreenSize Max.(WxH)24.2” x 18.2”61.5 x 46.2cm60.6” x 45.4”153.8 x 115.4cm101.0” x 75.7”256.4 x 192.3cm141.3” x 106.0”359.0 x 269.2cm181.7” x 136.3”461.5 x 346.2cm242.3” x 181.7”615.4 x 461.5cm Min.(WxH)22.0” x 16.5”55.9 x 42.0cm55.1” x 41.3”139.9 x 104.9cm91.8” x 68.8”233.1 x 174.8cm128.5” x 96.4”326.3 x 244.8cm165.2” x 123.9”419.6 x 314.7cm220.3” x 165.2”559.4 x 419.6cm HdMax.2.73” (6.9cm)6.81” (17.3cm)11.36” (28.8cm)15.9” (40.4cm)20.44” (51.9cm)27.26” (69.2cm) Min.2.48” (6.3cm)6.19” (15.7cm)10.32” (26.2cm)14.45” (36.7cm)18.58” (47.2cm)24.78” (62.9cm) Distance3.9’ (1.2m)9.8’ (3.0m)16.4’ (5.0m)23.0’ (7.0m)29.5’ (9.0m)39.4’ (12.0m) This graph is for user’s reference only.
8English User Controls Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel PowerRefer to the “Power On/Off the Projector” section on pages 14-15. MenuPress “Menu” to launch the on-screen display (OSD) menu. To exit OSD, Press “Menu” again. EnterConfirm your item selection. AV MuteMomentarily turns off/on the audio and video. SourcePress “Source” to select an input signal. Re-SyncAutomatically synchronizes the projector to the input source. Four Directional Select Keys Use to select items or make adjustments to your selection. Power LEDIndicate the projector’s status. Lamp LEDIndicate the projector’s lamp status. Temp LEDIndicate the projector’s temperature status.
9English User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 14-15. Laser Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. PC/Mouse control The PC/Mouse control can be used to con- trol mouse movement. The mouse function is enabled using the USB cable to connect your computer and the projector. L ButtonMouse left click. R ButtonMouse right click. Page +Use this button to page up. Page -Use this button to page down. Enter Confirm your item selection. SourcePress “Source” to select an input signal. Re-Sync Automatically synchronizes the projector to the input source. Four Directional Select Keys Use to select items or make ad- justments to your selection. Keystone +/-Adjusts image distortion caused by tilting the projector. (±18 degrees) Volume +/-Adjusts to increase/decrease the volume. Brightness Adjust the brightness of the image. Remote Control
20English User Controls Using the Remote Control Menu Press “Menu” to launch the on-screen display (OSD) menu. To exit OSD, Press “Menu” again. Zoom Press “+/-” button to zoom in of an image. DVIPress “DVI” to choose DVI source. VGAPress “VGA” to choose source from VGA- IN connector. AV MuteMomentarily turns off/on the audio and video. S-VideoPress “S-Video” to choose S-Video source. FreezePress “Freeze” to pause the screen image. Video Press “Video” to choose Composite video source. This function is only available when the projector is connected to a video via a Y-type cable. Remote Control