Orion Pdp Mis 4230 Users Manual

Thank you for purchasing our MPDP.
Please read through this user's manual for safety before installing this\
 product.
This product is manufactured for Multi Plasma display model only.
• 2008.03.05
A revolutionary MPDP
Infinitely Expandable MPDP
User’s Manual
MIS-4220 / MIS-4220R
MIS-4230
A revolutionary MPDP
Infinitely Expandable MPDP
Address: 257, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, KoreaTel : +82-2-6678-8523,      Fax: +82-2-6678-8599
ORION PDP CO.,LTD.
www.oriondisplay.net
           

1
Infinitely Expandable 
Contents
Wall mounting Unit(refer to page 11)Stand Unit(refer to page 10)RS-232C Distributor Necessary for connecting more than 10 units.
Remote Controller 
Receiver Set
1 Input, 6 Output
User's ManualMulti-Screen ControlSystem(MSCS)Guide Pin(4pcs)Handle (2 pcs)
RS232 CableBolt (4 pcs)DVI-D CablePower Cable
Supplied Accessories
Optional Accessories
※Pleasekeepfollowinginstructionfor
panelprotectionwithoutexception....

2
MIS-4220 / MIS-4220R / MIS-4230
Warning
3
Infinitely Expandable 
Warning
WarningWarning
※Handle with Caution.
     - Shock/Impact on the set's sides will result in 
internal circuit damages.
     - The edge/bottom of the panel are fragile.  
Use shock-absorbing pads or rugs for laying 
down the product.
Please do not stand PDP •	
alone. It may fall or slip 
off and Panel can be 
broken or damaged.
If you need to stand PDP, •	
you must use handles on 
the back and lean over 
the PDP to avoid panel...

4
MIS-4220 / MIS-4220R / MIS-4230
Warning
5
Infinitely Expandable 
Warning
Open Structure
UnlikeconsumerPDPproduct,thepanelofMPDPisexposedwithout
anyprotectivechassis.
Itneedsextracautiontocarryorinstalltopreventanyimpact. 
How to carry MPDP
ItalwaysneedstwopersonstocarryorinstallMPDP.
Whenyou carry MPDP with up straight manner,...

6
MIS-4220 / MIS-4220R / MIS-4230
7
Infinitely Expandable 
1. Safety Precautions
Do not poke the front screen with sharp •	
material. It may damage the screen and 
may cause malfunction of the product.
Do not lean against the product or keep •	
it leaned.  It may cause injury or failure.
 
Do not put it at any place with much •	
humidity, dust, oil, smoke or steam.  It 
may cause failure.
If you do not want to use the product •	
for a long time, keep the power plug 
unplugged to save electricity.
The...

8
MIS-4220 / MIS-4220R / MIS-4230
9
Infinitely Expandable 
2. How to install
How to assemble handles
Install this set only at a location where adequate ventilation is available. y
1.ProductispackedinaboxasshowninFigure1.
2.PleasecarefullyremovethePackingBagwithaknifeorapairofscissors. 
   ※  Please check front and rear side before you cut the bag to prevent any damages 
on panel or set....

10
MIS-4220 / MIS-4220R / MIS-4230
11
Infinitely Expandable 
install on a Stand
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 
Stand Unit (Option)
The set can be installed as shown below.   y
(For further information, refer to the optional 'Stand Installation and Setup Guide'.)
Wall Mounting Unit (Option)
The set can be installed on the wall as shown below.   y
(For further information, refer to the optional 'Wall Mounting Bracket...

12
MIS-4220 / MIS-4220R / MIS-4230
13
Infinitely Expandable 
install on a Main FraME Stand
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 
Main FraME Stand Unit (Option)
The set can be installed as shown below.   y
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)
Main FraME Wall Mounting Unit (Option)
The set can be installed on the wall as shown below.   y
(For further information, refer to the...

14
MIS-4220 / MIS-4220R / MIS-4230
15
Infinitely Expandable 
3. guidance for Users
input/Output Terminals
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUTY
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECTM-ON
M-STB S-ON F A N
❶
❷
❸
❹
❺ 
❻
❼
❽
1. RS-232C
MPDP Control, Firmware Upgrade, 9pin D-sub
2. Video
Composite Signal
NTSC, PAL, SECAM
3. S-Video
S-Video Signal
NTSC, PAL, SECAM, 4pin Mini Din
4. Component
DVD Signal
DTV - YPbPr Signal
5. PC
Computer RGB Analog Signal, D-sub 15pin
6....

16
MIS-4220 / MIS-4220R / MIS-4230
17
Infinitely Expandable 
4. How to Connect Cables
4.1. Connection of one set MPDP
PC & DVi Connection
MPDP and PC should be connected; a Com Port in a PC and RS-232C IN port in a  y
MPDP is connected with supplied RS-232C cable.
 
MPDP On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control  y
System). 
 
ID setting on the backside of MPDP must be identical with the ID setting in MSCS to  y
control MPDP with a PC.
If you do not have Com Port, you...