Orion Pdp Opm 4240 Users Manual

Thank you for purchasing our MPDP.
Please read through this user's manual for safety before installing this\
 product.
This product is manufactured for Multi Plasma display model only.
• 2009.05.21
A revolutionary MPDP
Infinitely Expandable MPDP
User’s Manual
OPM-4240 / OPM-4240R
A revolutionary MPDP
Infinitely Expandable MPDP
Address: 257-6, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, Korea
Tel : +82-2-6678-8533,      Fax: +82-2-6678-8599
ORION PDP CO.,LTD.
www.oriondisplay.net...

1
Infinitely Expandable 
User's ManualMulti-Screen ControlSystem(MSCS)Guide Pin(4pcs)Handle (2 pcs)
RS232 CableBolt (4 pcs)DVI-D CablePower Cable
Supplied Accessories
Features of MPDP
▶  
Enjoy a wide flat screen with high brightness and high quality.
▶Easy to install and move due to its thin design
▶ Enjoy your favorite programs with various split-screen features simultan\
eously presenting 
several programs.
Thank you for purchasing our MPDP monitor.
This manual describes how to use the product and...

2
OPM-4240 / OPM-4240R
3
Infinitely Expandable 
Contents
※Pleasekeepfollowinginstructionfor
panelprotectionwithoutexception. ..............................................................4
1.SafetyPrecautions  ........................................................................................... .......8
2.HowtoInstall ............................................................................................. ...............10...

4
OPM-4240 / OPM-4240R
Warning
5
Infinitely Expandable 
Warning
WarningWarning
※Handle with Caution.
     - Shock/Impact on the set's sides will result in 
internal circuit damages.
     - The edge/bottom of the panel are fragile.  
Use shock-absorbing pads or rugs for laying 
down the product.
Please do not stand PDP •	
alone. It may fall or slip 
off and Panel can be 
broken or damaged.
If you need to stand PDP, •	
you must use handles on 
the back and lean over 
the PDP to avoid panel 
touches...

6
OPM-4240 / OPM-4240R
Warning
7
Infinitely Expandable 
Warning
Open Structure
UnlikeconsumerPDPproduct,thepanelofMPDPisexposedwithout
anyprotectivechassis.
Itneedsextracautiontocarryorinstalltopreventanyimpact. 
How to carry MPDP
ItalwaysneedstwopersonstocarryorinstallMPDP.
Whenyou carry MPDP with up straight manner, please...

8
OPM-4240 / OPM-4240R
9
Infinitely Expandable 
1. Safety Precautions
Do not poke the front screen with sharp •	
material. It may damage the screen and 
may cause malfunction of the product.
Do not lean against the product or keep •	
it leaned.  It may cause injury or failure.
 
Do not put it at any place with much •	
humidity, dust, oil, smoke or steam.  It 
may cause failure.
If you do not want to use the product •	
for a long time, keep the power plug 
unplugged to save electricity.
The socket-outlet...

10
OPM-4240 / OPM-4240R
11
Infinitely Expandable 
2. How to install
How to assemble handles
Install this set only at a location where adequate ventilation is available. y
1.ProductispackedinaboxasshowninFigure1.
2.PleasecarefullyremovethePackingBagwithaknifeorapairofscissors. 
   ※  Please check front and rear side before you cut the bag to prevent any damages 
on panel or set....

12
OPM-4240 / OPM-4240R
13
Infinitely Expandable 
install on a Main FraME Stand
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 
Main FraME Stand Unit (Option)
The set can be installed as shown below.   y
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)
Main FraME Wall Mounting Unit (Option)
The set can be installed on the wall as shown below.   y
(For further information, refer to the optional...

14
OPM-4240 / OPM-4240R
15
Infinitely Expandable 
3. guidance for Users
input/Output Terminals
❶
❷
❸
❹
❺ 
❻
❼
❽
1. RS-232C
MPDP Control, Firmware Upgrade, 9pin D-sub
2. Video
Composite Signal
NTSC, PAL, SECAM
3. S-Video
S-Video Signal
NTSC, PAL, SECAM, 4pin Mini Din
4. Component
DVD Signal
DTV - YPbPr Signal
5. PC
Computer RGB Analog Signal, D-sub 15pin
6. DVI-D
TMDS Signal
7. ID Switch
Set ID Switch
8. RS-232C(BIC)
BIC Firmware Upgrade
9. AC Input
AC 100V ~240V, 50/60Hz
Set iD Switch Setting
Example of...

16
OPM-4240 / OPM-4240R
17
Infinitely Expandable 
4. How to Connect Cables
4.1. Connection of one set MPDP
PC & DVi Connection
MPDP and PC should be connected; a Com Port in a PC and RS-232C IN port in a  y
MPDP is connected with supplied RS-232C cable.
 
MPDP On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control  y
System). 
 
ID setting on the backside of MPDP must be identical with the ID setting in MSCS to  y
control MPDP with a PC.
If you do not have Com Port, you need to use...