Home > Panasonic > Television > Panasonic 50" Class 1080p Plasma Hdtv Tc P50vt20 Operating Instructions

Panasonic 50" Class 1080p Plasma Hdtv Tc P50vt20 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic 50" Class 1080p Plasma Hdtv Tc P50vt20 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							3031
    Viewing
     VIERA CAST
    TM
    Optional AccessoryCommunication Camera TY-CC10W
    •  This camera can be used on VIERA CAST.•  For details, read the manual of the Communication Camera.
    Internet connections
    Contact your Broadband service providerNOTICE: If you don’t have Internet service by your local provider, please order a high-speed 
    Internet service at no less than the following connection speed. If you \
    already have such service, 
    make sure that the connection speed exceeds the following.
      Required speed (effective): at least 1.5 Mbps for SD and 6Mbps for HD picture quality, respectively.  Dial-up Internet service cannot be used for VIERA CAST.
    Select wired or wireless connection If the Cable/DSL modem is close to the TV and you have only one TV set, you may choose a wired connection. If the 
    Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use a wireless network.
    Connecting to the internet 
    ABasic connection
    If you are not using the network for connecting anything else but the TV, you could just connect 
    the TV directly to the Cable/DSL Ethernet connection (see schematic below). 
    BAdvanced wired connection
    If you are using the network for connecting various PCs/Laptops and want\
     to connect the TV, 
    you should use a router to connect the TV to the Internet (see schematic below). 
    CAdvanced wireless connection 1
    If you are using the network for connecting various PCs/Laptops and want\
     to connect the TV, 
    you could also use a wireless router to connect the TV to the Internet (see schematic below).
    DAdvanced wireless connection 2
    If you are using the network for connecting various PCs/Laptops and want\
     to connect the TV, you could 
    also use a wireless LAN adapter and Access point to connect the TV to the Internet (see schematic below).
    Internet
    Internet
    InternetInternet
    Cable/
    DSL 
    modem
    Ethernet 
    cable Router
    B
    C
    Wireless 
    Repeater Cable/
    DSL 
    modem
    Cable/
    DSL 
    modem
    A
    D
    Example of Network connection
       For more details on the external equipment’s connections, please refer to the operating manuals for the equipment
    Internet
    Ethernet 
    cable
    Router/
    Access point Internet equipment
    Set Internet setting (LAN) for 
    connected equipment with 
    Internet equipment if you need. 
    * You cannot set Internet setting 
    from this TV.
    Cable/DSL 
    modem
    Back of the TV
    Network Camera
    *  About wireless 
    LAN (p. 16)
    *  Models capable of a wireless 
    LAN connection are also 
    available.
    VIERA CASTTM
    You can access information services (TV content) from the Home screen v\
    ia the Internet.  You need broadband environment to use this service.
    Operate VIERA CAST
     Press to exit from 
    a menu screen
     
     Press to return to 
    the Home screen 
    Preparations
      Internet connections (p. 31)  Network settings (p. 46-49)
    Display the Home screen
    Select the item and press OK
    MORE
    BACK
     select
     view
    Video communication (e.g. Skype™) 
    requires an exclusive Communication 
    Camera TY-CC10W (above).
    This screen is an example. It varies according to the usage conditions.
    *  Depending on the usage conditions, it may take a while to read all the d\
    ata.
    •  VIERA CAST contents are subject to change without notice.
    •  Not all VIERA Cast contents are available depending on the country and area.
    •  3D images are not displayed on center of the home screen depending on th\
    e signal.
     Using USB keyboard  USB connections (p. 57, 60)  Keyboard type (p. 39)  Operate USB keyboard/Entering characters (p.19)
    Other 
    settings
    In 
     Display “Menu”  Adjust the Picture and Audio
     select
     adjust
    0
    0
    0
    0
    0Vivid
    Picture
    1/2
    Brightness
    Color
    Tint
    Sharpness Picture mode
    Contrast Reset to defaults
    example: Picture menu
    Picture menu/Audio menu 
    (p. 38)
     Select the item  Use VIERA Link function
     select
     OK
    Menu
    Picture
    Audio
    VIERA Link
     select
     change
    Recorder
    TV
    VIERA Link control
    Speaker output Record now
    Stop recording
    Back to TV
    VIERA Link (p. 44) Set 
    						
    							3233
    Viewing
     Network Camera
    Network camera setting
    Before using a Network camera, you need to register the camera as shown \
    below. You can also 
    set default camera or disconnect/delete the registered cameras.
    ■ Press to exit from 
    a menu screen
    ■ Press to return 
    to the previous 
    screen
    Follow direction - in “Network settings” (p.46)
    Select “Setup” and “Network cameras list”
    Menu
    Displays compatible network cameras that 
    have been connected and registered.
    Network settings
    VIERA CAST settingNetwork cameras list
    Software update
    Mac address Connection test
    Network connectionWireless networkIP address/DNS settings
    Wireless (WiFi)
    00-0b-97-7c-65-e9
    -
     select
     next
    If there is no registered camera
    Select “Yes” to start searchPlease refer to camera’s settings and enable its link 
    mode.
    Start searching for network camera?
    Ye sNo
     select
     next
    Set Network camera setting
    RGBY
    Select
    RETURNOK
    Network cameras listModel Status Default
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    Camera name
    BL-C210A Connected
    Camera 1
    Find cameras Delete
    Disconnect Default camera
    select
     Network camera setting operation
    “Please refer to camera’s settings and enable its link mode. Start searching for network camera?\
    ” “Yes” to start camera search. Before you start to search for a camera, switch the camera to registrat\
    ion 
    mode. (For this operation, please refer to the operating manual for the\
     
    Network camera.)
     Search condition also depends on “Network settings” (p.46-49).
    “Remove camera information?” “Yes” to delete camera information.
    “Disconnect to camera?” “Yes” to delete camera connection.  “Disconnected” will be displayed in “Status”.
    “Set this camera as default camera?” “Yes” to set to the default use. Displayed “(Default)” next to camera name.
    (Available only when reconnecting)
    “Connect to Camera? 
      “Yes”: “Connect” will be displayed in “Status”.(Attach up to 8 Network cameras simultaneously).
    Network Camera
    ■ Press to exit from 
    a menu screen
    ■ Press to return 
    to the previous 
    screen
    Preparations  Internet connections (p. 31)   Example of Network connection (p. 31)  Network settings (p. 46-49)
         Before connecting the Network camera to the TV, please complete “IP setting” and run 
    “Connection test”(p. 46-49)
    With all connected equipment turned on
    Display “VIERA Link” menu
      If there is no registered camera displayed, please set it in 
    Network Camera settings. (p. 33)
      There is also an option to start with sensor detection.
    Select “Network camera”
    Network camera
    TV
    VIERA Link control
    Speaker output Record now
    Stop recording
    Back to TV
     select
     OK
    View
    Select OK
    RETURNR4 cam / 8 cam
    Camera name Camera 1
    Model BL-C210A
    Multi screen(1/4)
    4 split screen
     select
     OK to Single screen
      Default camera setting (p. 33)
    R4 cam / 8 camSelect OK
    RETURN1-9
    Camera name Camera 1
    Model BL-C210A
    Multi screen(1/9)
    9 split screen
     select
     OK to Single screen
    Preset position
    Home position1-90Pan
    Tilt RETURN
    Single screen
    Camera name 
    Camera 1
    Model BL-C210A
    Single screen
    Preset position
    Home position1-90
    Pan
    Tilt RETURN
    Navigation area
    Note
     A number of VIERA-compatible network cameras can be found at the followin\
    g sites:http://www.panasonic.com/
    http://panasonic.net/pcc/products/netwkcam/
      For more details on setting and operation of the Network camera, please \
    also read 
    the operating manuals for the Network camera.
    You can operate the Network camera from the TV remote and also check the images from the Network 
    camera on your TV. 
      VIERA Link control only with the TV’s remote control (p. 45)
    Basic operation for Network camera 
    						
    							3233
    Viewing
     Network Camera
    Network camera setting
    Before using a Network camera, you need to register the camera as shown \
    below. You can also 
    set default camera or disconnect/delete the registered cameras.
    ■ Press to exit from 
    a menu screen
    ■ Press to return 
    to the previous 
    screen
    Follow direction - in “Network settings” (p.46)
    Select “Setup” and “Network cameras list”
    Menu
    Displays compatible network cameras that 
    have been connected and registered.
    Network settings
    VIERA CAST settingNetwork cameras list
    Software update
    Mac address Connection test
    Network connectionWireless networkIP address/DNS settings
    Wireless (WiFi)
    00-0b-97-7c-65-e9
    -
     select
     next
    If there is no registered camera
    Select “Yes” to start searchPlease refer to camera’s settings and enable its link 
    mode.
    Start searching for network camera?
    Ye sNo
     select
     next
    Set Network camera setting
    RGBY
    Select
    RETURNOK
    Network cameras listModel Status Default
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    Camera name
    BL-C210A Connected
    Camera 1
    Find cameras Delete
    Disconnect Default camera
    select
     Network camera setting operation
    “Please refer to camera’s settings and enable its link mode. Start searching for network camera?\
    ” “Yes” to start camera search. Before you start to search for a camera, switch the camera to registrat\
    ion 
    mode. (For this operation, please refer to the operating manual for the\
     
    Network camera.)
     Search condition also depends on “Network settings” (p.46-49).
    “Remove camera information?” “Yes” to delete camera information.
    “Disconnect to camera?” “Yes” to delete camera connection.  “Disconnected” will be displayed in “Status”.
    “Set this camera as default camera?” “Yes” to set to the default use. Displayed “(Default)” next to camera name.
    (Available only when reconnecting)
    “Connect to Camera? 
      “Yes”: “Connect” will be displayed in “Status”.(Attach up to 8 Network cameras simultaneously).
    Network Camera
    ■ Press to exit from 
    a menu screen
    ■ Press to return 
    to the previous 
    screen
    Preparations  Internet connections (p. 31)   Example of Network connection (p. 31)  Network settings (p. 46-49)
         Before connecting the Network camera to the TV, please complete “IP setting” and run 
    “Connection test”(p. 46-49)
    With all connected equipment turned on
    Display “VIERA Link” menu
      If there is no registered camera displayed, please set it in 
    Network Camera settings. (p. 33)
      There is also an option to start with sensor detection.
    Select “Network camera”
    Network camera
    TV
    VIERA Link control
    Speaker output Record now
    Stop recording
    Back to TV
     select
     OK
    View
    Select OK
    RETURNR4 cam / 8 cam
    Camera name Camera 1
    Model BL-C210A
    Multi screen(1/4)
    4 split screen
     select
     OK to Single screen
      Default camera setting (p. 33)
    R4 cam / 8 camSelect OK
    RETURN1-9
    Camera name Camera 1
    Model BL-C210A
    Multi screen(1/9)
    9 split screen
     select
     OK to Single screen
    Preset position
    Home position1-90Pan
    Tilt RETURN
    Single screen
    Camera name 
    Camera 1
    Model BL-C210A
    Single screen
    Preset position
    Home position1-90
    Pan
    Tilt RETURN
    Navigation area
    Note
     A number of VIERA-compatible network cameras can be found at the followin\
    g sites:http://www.panasonic.com/
    http://panasonic.net/pcc/products/netwkcam/
      For more details on setting and operation of the Network camera, please \
    also read 
    the operating manuals for the Network camera.
    You can operate the Network camera from the TV remote and also check the images from the Network 
    camera on your TV. 
      VIERA Link control only with the TV’s remote control (p. 45)
    Basic operation for Network camera 
    						
    							3435
    Viewing
      Watching Videos and DVDs
    VIERA LinkTM Setting
    If you connect equipment that has the “HDAVI Control” function to the TV using an HDMI cable, 
    you will find it easier to use. Please refer to p. 40-45. Before using t\
    hese functions, you need to 
    set “VIERA Link” setting to “On” as shown below.
     Press to exit from a menu screen
     Press to return to 
    the previous screen
    Display the menu
    Select “Setup”
    Menu
    Adjusts Surf mode, Language, Clock,
    Channels, Inputs, and other settings.
    Setup 2/2
    Advanced setupFirst time setup
    About
    Reset to defaults VIERA Link settings
    ECO / energy savingKeyboard typeU.S.
     select
     next
    Select “VIERA Link settings”
    Setup
    Menu 2/2
    Keyboard type
    VIERA Link settings
    ECO/energy saving
    U.S.
     select
     next
    Select “VIERA Link”
    OnNoYe s
    TV
    Quick start
    No (stay on)
    Menu
    Enables or disables interoperability of
    “HDAVI Control” compliant HDMI devices.
    VIERA Link settingsVIERA LinkPower on link
    Power off link
    Default speakers
    Energy saving mode
    Unselected device energy save
    select
    Select “On”(default is On)change
    Now you can set each “VIERA Link” function according to your preference 
    (p. 42-45).
    Note
      If no HDMI equipment is connected or standard HDMI equipment (non- “\
    VIERA 
    Link”) is used, set it to “Off”.
      For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
    Watching Videos and DVDs
    If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen.
    Input Select
    You can select the external equipment to access.
     To return to TV
      
    With the connected equipment turned On
    Display the Input select menu
    Select the input mode
    Input selectTV12345678
    HDMI 1
    HDMI 2
    HDMI 3
    Component 2
    Video 1
    9
    0Video 2
    PC GAME
    HDMI 4
    Component 1
    AUX
    GAME GAME
    (example)
    or
     select
     enter
    Press the corresponding NUMBER 
    button on the remote control to 
    select the input of your choice.
    Select the input of your choice, then 
    press OK.
      During the selection, if no action 
    is taken for several seconds, the 
    “Input select” menu disappears.
    HDMI 1GAMETerminal
    (example) Label  The terminal and label of the 
    connected equipment are 
    displayed.
      To label each of the inputs,  please refer to p. 55.
    Note
      The Input label will be displayed on the “Input select” screen if \
    the Input label is set on p. 55. 
      For side input terminals (HDMI 4/Video 2), “GAME” Input label is set as default. (Picture mode is set to “Game”, refer to p. 61.)
      For more details on the Picture mode setting, refer to p. 61. For “In\
    put labels”, refer to p. 55. 
     Press Game to switch to the game screenSwitches to input terminal that has “GAME” label.  Cycle through the input terminals if there are multiple input terminals that have “GAME” 
    label. (p. 55)
      If there is no input terminal with “GAME” label, you cannot switch the input terminal 
    to any other input terminal than the one 
    currently selected.
    Video 2GAME
    HDMI 4GAME
    HDMI 1GAME
    Operate the connected equipment using the remote 
    control supplied with the equipment
    Note
      For details, see the manual for the connected equipment. 
    						
    							3435
    Viewing
      Watching Videos and DVDs
    VIERA LinkTM Setting
    If you connect equipment that has the “HDAVI Control” function to the TV using an HDMI cable, 
    you will find it easier to use. Please refer to p. 40-45. Before using t\
    hese functions, you need to 
    set “VIERA Link” setting to “On” as shown below.
     Press to exit from a menu screen
     Press to return to 
    the previous screen
    Display the menu
    Select “Setup”
    Menu
    Adjusts Surf mode, Language, Clock,
    Channels, Inputs, and other settings.
    Setup 2/2
    Advanced setupFirst time setup
    About
    Reset to defaults VIERA Link settings
    ECO / energy savingKeyboard typeU.S.
     select
     next
    Select “VIERA Link settings”
    Setup
    Menu 2/2
    Keyboard type
    VIERA Link settings
    ECO/energy saving
    U.S.
     select
     next
    Select “VIERA Link”
    OnNoYe s
    TV
    Quick start
    No (stay on)
    Menu
    Enables or disables interoperability of
    “HDAVI Control” compliant HDMI devices.
    VIERA Link settingsVIERA LinkPower on link
    Power off link
    Default speakers
    Energy saving mode
    Unselected device energy save
    select
    Select “On”(default is On)change
    Now you can set each “VIERA Link” function according to your preference 
    (p. 42-45).
    Note
      If no HDMI equipment is connected or standard HDMI equipment (non- “\
    VIERA 
    Link”) is used, set it to “Off”.
      For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
    Watching Videos and DVDs
    If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen.
    Input Select
    You can select the external equipment to access.
     To return to TV
      
    With the connected equipment turned On
    Display the Input select menu
    Select the input mode
    Input selectTV12345678
    HDMI 1
    HDMI 2
    HDMI 3
    Component 2
    Video 1
    9
    0Video 2
    PC GAME
    HDMI 4
    Component 1
    AUX
    GAME GAME
    (example)
    or
     select
     enter
    Press the corresponding NUMBER 
    button on the remote control to 
    select the input of your choice.
    Select the input of your choice, then 
    press OK.
      During the selection, if no action 
    is taken for several seconds, the 
    “Input select” menu disappears.
    HDMI 1GAMETerminal
    (example) Label  The terminal and label of the 
    connected equipment are 
    displayed.
      To label each of the inputs,  please refer to p. 55.
    Note
      The Input label will be displayed on the “Input select” screen if \
    the Input label is set on p. 55. 
      For side input terminals (HDMI 4/Video 2), “GAME” Input label is set as default. (Picture mode is set to “Game”, refer to p. 61.)
      For more details on the Picture mode setting, refer to p. 61. For “In\
    put labels”, refer to p. 55. 
     Press Game to switch to the game screenSwitches to input terminal that has “GAME” label.  Cycle through the input terminals if there are multiple input terminals that have “GAME” 
    label. (p. 55)
      If there is no input terminal with “GAME” label, you cannot switch the input terminal 
    to any other input terminal than the one 
    currently selected.
    Video 2GAME
    HDMI 4GAME
    HDMI 1GAME
    Operate the connected equipment using the remote 
    control supplied with the equipment
    Note
      For details, see the manual for the connected equipment. 
    						
    							3637
    Viewing
    Advanced
     How to Use Menu Functions  Displaying PC Screen on TV
    How to Use Menu Functions
    Various menus allow you to set the picture, sound, and other functions so\
     that you can enjoy watching TV 
    best suited for you.
     Press to exit from a menu screen
     Press to return to the previous 
    screen
     
    Display the menu
      Shows the functions that can be adjusted.  Some functions will be disabled depending on  the type of input signal.
    RETURNAdd user label
    Menu
    Select or enter the name of the device
    connected to the HDMI 1 terminal.
    RGBYChange Select
    Input labels
    HDMI 4
    Component 1
    Component 2
    Video 1
    Video 2
    PC HDMI 2
    HDMI 3 HDMI 1
    Menu structure
    Menu bar
    Press OK to move to the Menu items.
    Menu items
    Press OK to proceed to the next 
    screen if available.
    Help information
    Operation guide
    (example: Input labels)
    Select the menu
    Custom
    Menu
    0
    0
    Picture1/2
    Brightness Picture mode
    Contrast Reset to defaults
     select
     next
    Select the item
    Custom
    Menu
    Resets all picture adjustments to factory
    default settings except for “Advanced
    picture”.
    0
    0
    0
    0
    0
    Picture1/2
    Brightness
    Color
    Tint
    Sharpness Picture mode
    Contrast Reset to defaults
    (example:  Picture menu)
    select
    Adjust or select
    Vivid
    Menu
    Selects from preset picture modes.
    0
    0
    0
    0
    0
    Picture1/2
    Brightness
    Color
    Tint
    Sharpness Picture mode
    Contrast Reset to defaults
    (example:  Picture menu)
    adjust
    or 
    select
    Displaying PC Screen on TV
    The screen of the PC connected to the unit can be displayed on the TV.
    You can also listen to PC sound with the audio cable connected. To connect PC. (p. 57)
    Display the Input select menu
    Input selectTV12345678
    HDMI 1
    HDMI 2
    HDMI 3
    Component 2
    Video 1
    9
    0Video 2
    PCGAME
    HDMI 4
    Component 1
    AUX
    GAME GAME
    Select “PC”
    PC
    Displays
    PC screen
     Corresponding signals 
    (p. 63)
     To return to TV       /  
     PC menu setting (change as desired) Making settings  “How to Use Menu Functions”  to  (p. 37) 
    Menu Item Adjustments/Configurations (options)
    Picture
    PC
    adjustments
    Reset to 
    defaultsResets PC adjustments. Confirmation screen is displayed. Select “Yes” and press OK to reset.
    Sync H & V:    The H and V sync signals are input from the HD/VD connector. (p. 63) On green:   Uses a synchronized signal on the Video G signal, which is input from the 
    G connector. (p. 63)
    Dot clock 
    Alleviates the problem if a picture appears to be vertically-striped, fl\
    ickers partially or is blurred.
    H-position Adjusts the horizontal 
    position.  
    V-positionAdjusts the vertical position.  
    Clock phase
    Alleviates the problem if the whole picture appears to flicker or is blu\
    rred.
    First adjust the Dot Clock to get the best possible picture, then adjust\
     the
    Clock Phase so that a clear picture appears.
    NoteIt may not be possible to display a clear picture due to poor input sign\
    als.
    Input
    resolution Switches to wide display.
     Input signal switched from 640×480 to 852×480 Input signal switched from 1024×768 to 1280×768 or 1366×768
    H-frequency
    V-frequency Displays the H (Horizontal)/V (Vertical) frequencies.
     Display range
    Horizontal:  15 - 110 kHz
    Vertical:    48 - 120 Hz
      Audio menu (p. 38) 
    						
    							3637
    Viewing
    Advanced
     How to Use Menu Functions  Displaying PC Screen on TV
    How to Use Menu Functions
    Various menus allow you to set the picture, sound, and other functions so\
     that you can enjoy watching TV 
    best suited for you.
     Press to exit from a menu screen
     Press to return to the previous 
    screen
     
    Display the menu
      Shows the functions that can be adjusted.  Some functions will be disabled depending on  the type of input signal.
    RETURNAdd user label
    Menu
    Select or enter the name of the device
    connected to the HDMI 1 terminal.
    RGBYChange Select
    Input labels
    HDMI 4
    Component 1
    Component 2
    Video 1
    Video 2
    PC HDMI 2
    HDMI 3 HDMI 1
    Menu structure
    Menu bar
    Press OK to move to the Menu items.
    Menu items
    Press OK to proceed to the next 
    screen if available.
    Help information
    Operation guide
    (example: Input labels)
    Select the menu
    Custom
    Menu
    0
    0
    Picture1/2
    Brightness Picture mode
    Contrast Reset to defaults
     select
     next
    Select the item
    Custom
    Menu
    Resets all picture adjustments to factory
    default settings except for “Advanced
    picture”.
    0
    0
    0
    0
    0
    Picture1/2
    Brightness
    Color
    Tint
    Sharpness Picture mode
    Contrast Reset to defaults
    (example:  Picture menu)
    select
    Adjust or select
    Vivid
    Menu
    Selects from preset picture modes.
    0
    0
    0
    0
    0
    Picture1/2
    Brightness
    Color
    Tint
    Sharpness Picture mode
    Contrast Reset to defaults
    (example:  Picture menu)
    adjust
    or 
    select
    Displaying PC Screen on TV
    The screen of the PC connected to the unit can be displayed on the TV.
    You can also listen to PC sound with the audio cable connected. To connect PC. (p. 57)
    Display the Input select menu
    Input selectTV12345678
    HDMI 1
    HDMI 2
    HDMI 3
    Component 2
    Video 1
    9
    0Video 2
    PCGAME
    HDMI 4
    Component 1
    AUX
    GAME GAME
    Select “PC”
    PC
    Displays
    PC screen
     Corresponding signals 
    (p. 63)
     To return to TV       /  
     PC menu setting (change as desired) Making settings  “How to Use Menu Functions”  to  (p. 37) 
    Menu Item Adjustments/Configurations (options)
    Picture
    PC
    adjustments
    Reset to 
    defaultsResets PC adjustments. Confirmation screen is displayed. Select “Yes” and press OK to reset.
    Sync H & V:    The H and V sync signals are input from the HD/VD connector. (p. 63) On green:   Uses a synchronized signal on the Video G signal, which is input from the 
    G connector. (p. 63)
    Dot clock 
    Alleviates the problem if a picture appears to be vertically-striped, fl\
    ickers partially or is blurred.
    H-position Adjusts the horizontal 
    position.  
    V-positionAdjusts the vertical position.  
    Clock phase
    Alleviates the problem if the whole picture appears to flicker or is blu\
    rred.
    First adjust the Dot Clock to get the best possible picture, then adjust\
     the
    Clock Phase so that a clear picture appears.
    NoteIt may not be possible to display a clear picture due to poor input sign\
    als.
    Input
    resolution Switches to wide display.
     Input signal switched from 640×480 to 852×480 Input signal switched from 1024×768 to 1280×768 or 1366×768
    H-frequency
    V-frequency Displays the H (Horizontal)/V (Vertical) frequencies.
     Display range
    Horizontal:  15 - 110 kHz
    Vertical:    48 - 120 Hz
      Audio menu (p. 38) 
    						
    							3839
    Advanced
     How to Use Menu Functions(picture, sound quality, etc.)
     Menu list
    Menu Item Adjustments/Configurations (alternatives)
    Picture
    Reset to defaults*Resets all picture adjustments to factory default settings except for “\
    Advanced picture”.
    Picture mode
    Basic picture mode. (p. 61)
    2D mode: (Vivid/Standard/THX/Game/Custom)
    3D mode: (Vivid/Standard/Cinema/Game/Custom)
    • Each setting will be retained independently.
    Contrast, Brightness,
    Color, Tint, SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste
    • Display range Contrast/Brightness/Color/Sharpness: 0 - 100
       Tint  -50 - +50
    Color temp.Selects a choice of Cool (blue), Normal, or Warm (red) color.  (Cool 2/Cool 1/Normal/Warm 1/Warm 2)
    Color mgmt.On:  Enhances green and blue color reproduction, especially outdoor scen\
    es.  (Off/On) 
    x.v.ColorAuto: Provides the appropriate picture when images corresponding to “\
    x.v.Color” are input 
    via the HDMI input of this TV. (Off/Auto)
    Photo enhancementProvides appropriate picture when still images are input. (On/Off)
    * “x.v.color” will not work if “On” is set.
    C.A.T.S.Adjusts the brightness and gradation according to the ambient lighting c\
    ondition.  (Off/On)
    Video NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/Weak/Medium/Strong)
    Blur reductionImproves the moving picture resolution. (Off/On)
    Pro settingsAdjust the “Picture mode” setting in more detail. (p. 62)
    (This setting can be adjusted only when “Custom” or ”Photo”\
     is selected.)
    Aspect 
    adjustments
    Screen formatChanges the format (aspect ratio).  (FULL/H-FILL/JUST/4:3/ZOOM)
    Lets you choose the aspect depending on the format of received signal. (\
    p. 59)
    HD size
    Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning are\
    a with High-definition signal.  (Size 1/Size 2)Select “Size 1” if noise is generated on the edges of the screen.
    • Size 1: Selected item for “HD size”. Scanning 95 %
    • Size 2: Selected item for “HD size”. Scanning 100 %
    H sizeAdjusts the horizontal display range to reduce noise of both side edges \
    of an image. (Size 1/Size 2)Size 2: Adjusts the image size according to the aspect mode to reduce noise. (p. 62)
    Zoom adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”
    PC adjustmentsSets PC display (p. 36)
    HDMI/DVI RGB range
    (HDMI 1-4)Prevents the blown out highlights and blocked up shadows when a wide-ran\
    ge signal is received. 
    Selects between standard RGB range (16-235 bits) or non-compliance (0\
    -255 bits).  
    (Auto/Standard (16-235)/Nonstandard)
    Auto: Switches the RGB range (Standard (16-235)/Nonstandard) dependi\
    ng on the HDMI signal information.
    Advanced picture3D Y/C filter Minimizes noise and cross-color in the picture.  (Off/On)
    Color matrixSelects image resolution of component-connected devices  (SD/HD)
    • SD:  Standard Definition       HD:  High Definition       • Only used with 480p video signal.
    Block NRReduces noise of specific digital signals of DVD, STB, etc. (Off/On)
    Mosquito NRReduces HDTV flicker noise in the contoured sections of an image  (Off/On)
    Black levelSelects Dark or Light. Valid only for external input signals. (Dark/Light)
    3:2 pulldownAdjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
    24p Direct in96Hz/48Hz:  Achieves more cinematic playback by reproducing the movie contents at 2 \
    or 4 times the speed of 
    24 frames per second. If flicker is seen using 48Hz, please use 60Hz or \
    96Hz.  (96Hz/60Hz/48Hz)
    Audio
    Reset to defaults*Resets Bass, Treble, and Balance adjustments to factory default settings.
    BassIncreases or decreases the bass response.
    TrebleIncreases or decreases the treble response.
    BalanceEmphasizes the left / right speaker volume.
    Advanced audio
    A.I. soundEqualizes overall volume levels across all channels and external inputs.\
     (Off/On)
    BBE ViVA
    BBE ViVA HD3D (High-Definition 3D) Sound provides musically accurate natural 3\
    D image with 
    Hi-Fi sound. The clarity of the sound is improved by BBE while the width, depth and h\
    eight of sound 
    image are expanded by BBE’s proprietary 3D sound process. BBE ViVA HD3D Sound is compatible 
    with all TV programs including news, music, dramas, movies, sports and electronic\
     games.  (On/Off)
    BBEBBE High Definition Sound restores clarity and presence for better speec\
    h intelligibility and musical realism.  (On/Off)
    SurroundEnhances audio response when listening to stereo. (Off/On)
    Volume levelerMinimizes volume disparity after switching to external inputs.
    TV speakersSwitches to “Off” when using external speakers (Off/On)
    • “A.I. sound”, “BBE ViVA”, “BBE”, “Surround” and “Volume leveler” do not work if “Off” is selected.
    HDMI 1-4 inThe default setting is “Digital” for the HDMI connection. (Digita\
    l input signal) 
    Select audio input terminal when DVI cable is connected. (Analog audio \
    input signal)
    (Digital/Component 1/Component 2/Video 1/Video 2)
    TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time. (p. 56)
     Menu list
    Menu Item Adjustments/Configurations (alternatives)
    LockLocks the channels and programs. (p. 50)Closed 
    caption
    Closed captionDisplays subtitles (Closed caption) (p. 54)
    Setup
    3D settingsSet the 3D settings (p. 24)
    Channel surf modeSets the mode to select the channel with the Channel up/down button. 
    (All/Favorite/Digital only/Analog only)
    • Favorite: Only channels registered as FAVORITE. (p. 20)
    LanguageSelects the screen menu language.
    ClockAdjusts the clock. (p. 17)
    ANT/Cable setupSets channels. (p. 53)
    Input labelsSelects the terminal and label of the external equipment. (p. 55)
    Anti Image  retentionPixel orbiterPrevents “Image retention” with Wobbling. ( Automatic/Periodic)
    • Automatic: Shifts the display image automatically.
    • Periodic: Shifts the display image every (1/2/3/4) minutes according to what was\
     set in the “Time (minutes)” menu.
    Time (minutes)Sets the time for the “Pixel orbiter-Periodic” setting.  (1/2/3/4)
    4:3 side barsChanges the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
    • The recommended setting is “Bright” to prevent the panel “Image\
     retention”. (p. 62)
    Scrolling barPress “OK” to start the horizontal “Scrolling” on the screen\
    . (p. 62)Network settingsSets Network settings (p. 46)VIERA Link settings
    VIERA LinkControls the equipment connected to HDMI terminals.  (Off/On) (p. 42)
    • “Power off link”, “Power on link”, “Energy saving mode”, “Unsel\
    ected device energy save” 
    and “Default speakers” cannot be selected if “Off” is set.
    Power on linkSets “Power on link” of the HDMI connected equipment.  (No/Yes) (p. 42)
    Power off linkSets “Power off link” of the HDMI connected equipment. (No/Yes) (p. 42)
    Energy saving modeSets “Energy saving mode” of the HDMI connected equipment.  (Quick start/Save) (p. 42)
    Unselected device 
    energy saveSets “Unselected device energy save” of the HDMI connected equipme\
    nt. (p. 42)
    (No (stay on)/Yes (with prompt)/Yes (no prompt))
    Default speakersSelects the default speakers. (TV/Theater) (p. 42)
    ECO/energy savingNo signal for 10 
    minutes
    To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION 
    continue for more than 10 minutes. (Stay on/Power TV off)
    Note
    • Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or “Digital\
     
    Channel” is selected.
    • “No signal for 10 minutes was activated” will be displayed for abo\
    ut 10 seconds when the TV 
    is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
    • The on-screen display will flash 3, 2 and 1 to indicate the last three (\
    3) remaining minutes 
    prior to the shut-off.
    No activity for 3 
    hours
    To conserve energy, the TV automatically turns off when no operation of remote and side 
    panel key continues for more than 3 hours.  (Stay on/Power TV off)
    Note
    • Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC inputs” is selected.
    • “No activity for 3 hours was activated” will be displayed for abou\
    t 10 seconds when the TV 
    is turned on for the first time after the power was turned off by “No activity for 3 hours”.
    • The on-screen display will flash 3, 2 and 1 to indicate the last three (\
    3) remaining minutes prior to the shut-off.
    Keyboard typeSelect keyboard type. Operate USB keyboard (p. 19)(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain))Advanced  setupAuto power onTurns TV On automatically when the cable box or connected device is turned On \
     (No/Yes)
    TV AC cord must be plugged into this device. TV turns on every time the power is restored.
    • The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
    power on” is set. (p. 56)
    Image viewer LEDSet to “On”, if you want to light Image viewer LED while SD card i\
    s inserted.  (On/Off )
    Image viewer 
    auto playSets the media contents or playback type to play back SD cards automatic\
    ally. 
    (Slideshow/Photos/Videos/Music/Set later/Off)
    First time setupRestarts the first time setup from “Language” setting. (p. 14)
    AboutDisplays TV version and software license.
    Reset to defaultsPerforming Reset will clear all settings made with Setup, such as channe\
    l settings. (p. 52)
     Sub menu list
    Menu ItemAdjustments/Configurations (alternatives)
    Setup 
    SUB MENUChannel surf modeSets the mode to select the channel with the Channel up/down button. 
    (All/Favorite/Digital only/Analog only)
    Set favoriteSets favorite channels. (p. 19)
    Edit CH captionChanges the station identifier. (p. 53)
    Signal meterChecks the signal strength if interference or freezing occurs on a digit\
    al image. (p. 53)
      In the AV mode, the Audio and Setup menus give fewer options.
     *  Confirmation screen is displayed. Select “Yes” and press OK to reset.
    How to Use Menu Functions 
    						
    							3839
    Advanced
     How to Use Menu Functions(picture, sound quality, etc.)
     Menu list
    Menu Item Adjustments/Configurations (alternatives)
    Picture
    Reset to defaults*Resets all picture adjustments to factory default settings except for “\
    Advanced picture”.
    Picture mode
    Basic picture mode. (p. 61)
    2D mode: (Vivid/Standard/THX/Game/Custom)
    3D mode: (Vivid/Standard/Cinema/Game/Custom)
    • Each setting will be retained independently.
    Contrast, Brightness,
    Color, Tint, SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste
    • Display range Contrast/Brightness/Color/Sharpness: 0 - 100
       Tint  -50 - +50
    Color temp.Selects a choice of Cool (blue), Normal, or Warm (red) color.  (Cool 2/Cool 1/Normal/Warm 1/Warm 2)
    Color mgmt.On:  Enhances green and blue color reproduction, especially outdoor scen\
    es.  (Off/On) 
    x.v.ColorAuto: Provides the appropriate picture when images corresponding to “\
    x.v.Color” are input 
    via the HDMI input of this TV. (Off/Auto)
    Photo enhancementProvides appropriate picture when still images are input. (On/Off)
    * “x.v.color” will not work if “On” is set.
    C.A.T.S.Adjusts the brightness and gradation according to the ambient lighting c\
    ondition.  (Off/On)
    Video NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/Weak/Medium/Strong)
    Blur reductionImproves the moving picture resolution. (Off/On)
    Pro settingsAdjust the “Picture mode” setting in more detail. (p. 62)
    (This setting can be adjusted only when “Custom” or ”Photo”\
     is selected.)
    Aspect 
    adjustments
    Screen formatChanges the format (aspect ratio).  (FULL/H-FILL/JUST/4:3/ZOOM)
    Lets you choose the aspect depending on the format of received signal. (\
    p. 59)
    HD size
    Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning are\
    a with High-definition signal.  (Size 1/Size 2)Select “Size 1” if noise is generated on the edges of the screen.
    • Size 1: Selected item for “HD size”. Scanning 95 %
    • Size 2: Selected item for “HD size”. Scanning 100 %
    H sizeAdjusts the horizontal display range to reduce noise of both side edges \
    of an image. (Size 1/Size 2)Size 2: Adjusts the image size according to the aspect mode to reduce noise. (p. 62)
    Zoom adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”
    PC adjustmentsSets PC display (p. 36)
    HDMI/DVI RGB range
    (HDMI 1-4)Prevents the blown out highlights and blocked up shadows when a wide-ran\
    ge signal is received. 
    Selects between standard RGB range (16-235 bits) or non-compliance (0\
    -255 bits).  
    (Auto/Standard (16-235)/Nonstandard)
    Auto: Switches the RGB range (Standard (16-235)/Nonstandard) dependi\
    ng on the HDMI signal information.
    Advanced picture3D Y/C filter Minimizes noise and cross-color in the picture.  (Off/On)
    Color matrixSelects image resolution of component-connected devices  (SD/HD)
    • SD:  Standard Definition       HD:  High Definition       • Only used with 480p video signal.
    Block NRReduces noise of specific digital signals of DVD, STB, etc. (Off/On)
    Mosquito NRReduces HDTV flicker noise in the contoured sections of an image  (Off/On)
    Black levelSelects Dark or Light. Valid only for external input signals. (Dark/Light)
    3:2 pulldownAdjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
    24p Direct in96Hz/48Hz:  Achieves more cinematic playback by reproducing the movie contents at 2 \
    or 4 times the speed of 
    24 frames per second. If flicker is seen using 48Hz, please use 60Hz or \
    96Hz.  (96Hz/60Hz/48Hz)
    Audio
    Reset to defaults*Resets Bass, Treble, and Balance adjustments to factory default settings.
    BassIncreases or decreases the bass response.
    TrebleIncreases or decreases the treble response.
    BalanceEmphasizes the left / right speaker volume.
    Advanced audio
    A.I. soundEqualizes overall volume levels across all channels and external inputs.\
     (Off/On)
    BBE ViVA
    BBE ViVA HD3D (High-Definition 3D) Sound provides musically accurate natural 3\
    D image with 
    Hi-Fi sound. The clarity of the sound is improved by BBE while the width, depth and h\
    eight of sound 
    image are expanded by BBE’s proprietary 3D sound process. BBE ViVA HD3D Sound is compatible 
    with all TV programs including news, music, dramas, movies, sports and electronic\
     games.  (On/Off)
    BBEBBE High Definition Sound restores clarity and presence for better speec\
    h intelligibility and musical realism.  (On/Off)
    SurroundEnhances audio response when listening to stereo. (Off/On)
    Volume levelerMinimizes volume disparity after switching to external inputs.
    TV speakersSwitches to “Off” when using external speakers (Off/On)
    • “A.I. sound”, “BBE ViVA”, “BBE”, “Surround” and “Volume leveler” do not work if “Off” is selected.
    HDMI 1-4 inThe default setting is “Digital” for the HDMI connection. (Digita\
    l input signal) 
    Select audio input terminal when DVI cable is connected. (Analog audio \
    input signal)
    (Digital/Component 1/Component 2/Video 1/Video 2)
    TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time. (p. 56)
     Menu list
    Menu Item Adjustments/Configurations (alternatives)
    LockLocks the channels and programs. (p. 50)Closed 
    caption
    Closed captionDisplays subtitles (Closed caption) (p. 54)
    Setup
    3D settingsSet the 3D settings (p. 24)
    Channel surf modeSets the mode to select the channel with the Channel up/down button. 
    (All/Favorite/Digital only/Analog only)
    • Favorite: Only channels registered as FAVORITE. (p. 20)
    LanguageSelects the screen menu language.
    ClockAdjusts the clock. (p. 17)
    ANT/Cable setupSets channels. (p. 53)
    Input labelsSelects the terminal and label of the external equipment. (p. 55)
    Anti Image  retentionPixel orbiterPrevents “Image retention” with Wobbling. ( Automatic/Periodic)
    • Automatic: Shifts the display image automatically.
    • Periodic: Shifts the display image every (1/2/3/4) minutes according to what was\
     set in the “Time (minutes)” menu.
    Time (minutes)Sets the time for the “Pixel orbiter-Periodic” setting.  (1/2/3/4)
    4:3 side barsChanges the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
    • The recommended setting is “Bright” to prevent the panel “Image\
     retention”. (p. 62)
    Scrolling barPress “OK” to start the horizontal “Scrolling” on the screen\
    . (p. 62)Network settingsSets Network settings (p. 46)VIERA Link settings
    VIERA LinkControls the equipment connected to HDMI terminals.  (Off/On) (p. 42)
    • “Power off link”, “Power on link”, “Energy saving mode”, “Unsel\
    ected device energy save” 
    and “Default speakers” cannot be selected if “Off” is set.
    Power on linkSets “Power on link” of the HDMI connected equipment.  (No/Yes) (p. 42)
    Power off linkSets “Power off link” of the HDMI connected equipment. (No/Yes) (p. 42)
    Energy saving modeSets “Energy saving mode” of the HDMI connected equipment.  (Quick start/Save) (p. 42)
    Unselected device 
    energy saveSets “Unselected device energy save” of the HDMI connected equipme\
    nt. (p. 42)
    (No (stay on)/Yes (with prompt)/Yes (no prompt))
    Default speakersSelects the default speakers. (TV/Theater) (p. 42)
    ECO/energy savingNo signal for 10 
    minutes
    To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION 
    continue for more than 10 minutes. (Stay on/Power TV off)
    Note
    • Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or “Digital\
     
    Channel” is selected.
    • “No signal for 10 minutes was activated” will be displayed for abo\
    ut 10 seconds when the TV 
    is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
    • The on-screen display will flash 3, 2 and 1 to indicate the last three (\
    3) remaining minutes 
    prior to the shut-off.
    No activity for 3 
    hours
    To conserve energy, the TV automatically turns off when no operation of remote and side 
    panel key continues for more than 3 hours.  (Stay on/Power TV off)
    Note
    • Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC inputs” is selected.
    • “No activity for 3 hours was activated” will be displayed for abou\
    t 10 seconds when the TV 
    is turned on for the first time after the power was turned off by “No activity for 3 hours”.
    • The on-screen display will flash 3, 2 and 1 to indicate the last three (\
    3) remaining minutes prior to the shut-off.
    Keyboard typeSelect keyboard type. Operate USB keyboard (p. 19)(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain))Advanced  setupAuto power onTurns TV On automatically when the cable box or connected device is turned On \
     (No/Yes)
    TV AC cord must be plugged into this device. TV turns on every time the power is restored.
    • The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
    power on” is set. (p. 56)
    Image viewer LEDSet to “On”, if you want to light Image viewer LED while SD card i\
    s inserted.  (On/Off )
    Image viewer 
    auto playSets the media contents or playback type to play back SD cards automatic\
    ally. 
    (Slideshow/Photos/Videos/Music/Set later/Off)
    First time setupRestarts the first time setup from “Language” setting. (p. 14)
    AboutDisplays TV version and software license.
    Reset to defaultsPerforming Reset will clear all settings made with Setup, such as channe\
    l settings. (p. 52)
     Sub menu list
    Menu ItemAdjustments/Configurations (alternatives)
    Setup 
    SUB MENUChannel surf modeSets the mode to select the channel with the Channel up/down button. 
    (All/Favorite/Digital only/Analog only)
    Set favoriteSets favorite channels. (p. 19)
    Edit CH captionChanges the station identifier. (p. 53)
    Signal meterChecks the signal strength if interference or freezing occurs on a digit\
    al image. (p. 53)
      In the AV mode, the Audio and Setup menus give fewer options.
     *  Confirmation screen is displayed. Select “Yes” and press OK to reset.
    How to Use Menu Functions 
    						
    							4041
    Advanced
     VIERA Link
    TM “HDAVI Control
    TM”
    VIERA LinkTM “HDAVI ControlTM”
    Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote.
    Enjoy additional HDMI Inter-Operability with Panasonic products which ha\
    ve the “HDAVI Control” function.
    This TV supports “HDAVI Control 5” function.
    Connections to the equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI 
    cables allow you to interface with them automatically.
    Equipment with the “HDAVI Control” function enables the following operations:Version Operations
    HDAVI Control or later
    • Automatic Input Switching (p. 43)
    • Power on link (p. 43)
    • Power off link (p. 43)
    • Default speakers (p. 43)
    • One-touch theater playback (p. 43)
    • Speaker control (p. 45)
    HDAVI Control 2 or later
    • VIERA Link control only with the TV’s remote control (p. 45) 
    • Unselected device energy save (for available equipment only) (p. 43)\
    HDAVI Control 3 or later
    • Provides setting information (p. 43)
    • Automatic lip-sync function (p. 43)
    • Direct TV recording (p. 45)
    HDAVI Control 4 or later
    • Energy saving mode (with Quick Start mode) (p. 43)
    HDAVI Control 5
    • Audio Return Channel
    Audio Return Channel (ARC) is a function that enables digital sound si\
    gnals to 
    be sent via an HDMI cable.
     For the first time/When adding new equipment, reconnecting equipment or \
    changing the setup  after the connection, turn the equipment on and then switch the TV on. S\
    et the input mode to 
    HDMI1, HDMI2, HDMI3 or HDMI4 (p. 34), and make sure that the image is \
    displayed correctly.
    VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is\
     an industry standard known 
    as HDMI CEC (Consumer Electronics Control), is a unique function that \
    we have developed and added. As such, its 
    operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
    Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function.
     HDMI cable
    This function needs an HDMI compliant (fully wired) cable. Non-HDMI-co\
    mpliant cables cannot be utilized.
    It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
    RP-CDHS15 (4.9 ft/1.5 m), RP-CDHS30 (9.8 ft/3.0 m), RP-CDHS50 (16.4\
     ft/5.0 m)
     *  For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
    VIERA LinkTM Connections
    Follow the connection diagrams below for HDAVI control 
    of a single piece of AV equipment such as a DVD recorder 
    (DIGA), Home theater system.
    Refer to page 42-45 for Setup Menu settings and additional 
    control information.
    • Optional HDMI and/or optical cables are not included. If connection (or setting) of equipment compatible with 
    HDAVI control is changed, switch the power of this unit 
    Off and On again while the power of all equipment is On 
    (so that the unit can correctly recognize the connected 
    equipment) and check that the DVD recorder (DIGA), Home 
    theater system playback operates.
    Note
     HDMI 1 is recommended.
      When connecting to HDMI 2/HDMI 3/HDMI 4 set the input mode to HDMI 2/HDM\
    I 3/HDMI 4 (p. 34) initially before  connecting to HDMI 2/HDMI 3/HDMI 4. After connection, confirm the HDMI control functions (p. 42-45).
     Connecting this unit to the DVD recorder (DIGA), Home 
    theater system
     For DVD recorder (DIGA):  Connect with HDMI cable For Home theater system
      Connect with the HDMI and audio cables.
      If audio cable is not connected, you cannot listen to the TV program  through the theater system.
     *  No optical cable is necessary for the equipment that has “HDAVI control 5”  and is connected with an HDMI cable. (HDMI 1 only)
     Connecting this unit to a DVD 
    recorder (DIGA) and AV amp
       When using a “VIERA Link” audio-
    video amplifier and a compatible DVD 
    recorder (DIGA) use a daisy chain 
    connection as shown below.
     One AV amp and one DVD recorder (DIGA) can be operated with this unit. Be sure to connect the AV amp between this unit and the DVD recorder (DIGA).
     Setting of this unit after connection  After making connections as shown above, set “VIERA Link” (under “VIERA Link settings”) to “On” using the Setup 
    menu. (p. 35, 42-45).
    Note
     Individual HDMI equipment may require additional menu settings specific \
    to each model. Please refer to their 
    respective operating instruction manuals.
     When audio from other equipment connected to this unit via HDMI is outpu\
    t using “DIGITAL AUDIO OUT” of this unit, 
    the system switches to 2CH audio.
      (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
     For details about HDMI cables for connecting a Panasonic HD camcorder, read the manual for the equipment.
    HDMI cable
    HDMI
    (AV OUT)
    HDMI
    (AV OUT)
    Home theater systems 
    with VIERA Link function
    or
    or
    HDMI(AV IN)
    AV amp with 
    VIERA Link function
    DVD recorder (DIGA) 
    with VIERA Link functionHD Camcorder 
    with VIERA Link 
    function
    HDMI
    (AV OUT)HDMI
    (AV OUT)
    DVD recorder (DIGA) 
    with VIERA Link function
    or
    Back of the TV
    or
    HDMI
    (AV OUT)
    LUMIX 
    with VIERA 
    Link function
    or
    *
    Digital Audio  out
    or 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic 50" Class 1080p Plasma Hdtv Tc P50vt20 Operating Instructions