Panasonic 720p Multi Purpose Digital Camera Ak Hc900p Operating Instructions

11
O    I
BREAKER
ZOOM/
FOCUS
SDI OUT1
2
1
/F
G/L I N Pb  OUT Pr / SDI
OUTY/ VIDEO
OUT
1394CONTROL IN
IP/RPDC12V
IN
CAMERA I/F
LENSE I/F
ND/EXT SDI
IN
CSOP
O    I
HD-SDI
Pan/Tilt Head Controller
AW-RP301Multi-cable (5m)
AK-HDMLTCA05 Coaxial Cable (5C-FB)
AC Adaptor
AW-PS505
DC
Power
Cable
HD Controller
AK-HRP900*1
HD Monitor Remote
controllable
lens
Multi-purpose Digital
Camera AK-HC900P
*
1 To be sold in September 2002
External sync signal
(3 value sync)
Remote
(zoom/focus
control) cable
Multi-purpose...

12
O    I
BREAKER
ZOOM/
FOCUS
SDI OUT1
2
1
/F
O    I
HD-SDI
Multi-cable (5m)
AK-HDMLTCA05Coaxial Cable (5C-FB)
AC Adaptor
AW-PS505
DC
Power
Cable
HD Controller
AK-HRP900*1
HD Monitor Remote
controllable
lensMulti-purpose
Digital Camera
AK-HC900P
*
1 To be sold in September 2002 AC Adaptor
AW-PS505DC Power
Cable
Multi-purpose Digital Camera Control System Con-
figuration 2
(System for remotely monitoring picture control)
Multi-cable (5m)
AK-HDMLTCA05
Relay box
AK-HTF900*1
Remote (zoom/focus
control)...

13
O    I
BREAKER
ZOOM/
FOCUS
SDI OUT1
2
1
/F
G/L I N Pb  OUT Pr / SDI
OUTY/ VIDEO
OUT
1394CONTROL IN
IP/ RPDC12V
IN
CAMERA I/F
LENSE I/F
ND/EXT SDI
IN
CSOP
O    I
O    I
HD-SDI Multi-cable (5m)
AK-HDMLTCA05
Coaxial Cable (5C-FB)
AC Adaptor
AW-PS505
DC
Power
Cable
HD Controller
AK-HRP900*1
HD Monitor Remote
controllable
lens
Multi-purpose Digital
Camera AK-HC900P
Remote
(zoom/focus
control) cable
Pan/Tilt Head
AW-PH300A
AC Adaptor
AW-PS300 DC Power
Cable
AC Adaptor
AW-PS301
NOTE:
Pan/Tilt Head is also...

14
Operation Procedure
1Turn on the power of each equipment.
2Properly adjust the light for the ob-
ject.
3Adjust the flange back of the lens, the
iris and the focus.
≥ Flange back must be adjusted when
the camera is used for the first time or
after replacement of the lens.
4Adjust the white balance.
≥ This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥The adjustment is necessary when the
lighting condition or brightness is changed.
≥After...

15
_Flange back adjustment (for zoom lens)
The adjustment is to adjust the focus in all the range from the maximum zoom to the
widest angle of the zoom lens.
1 Shoot a dark object to open the iris.
2Adjust the distance from the object to 6.6 ft. (2 m) at least, then loosen the flange back
fixing knob of the lens.
3Set the lens to the maximum zoom and adjust the focus by turning the focus ring.
4Set the lens to the widest angle and adjust the focus by turning the flange back adjust
ring.
5Repeat adjusting...

16
_Color temperature and  while balance adjustment (reference)
When carbon is burnt, it develops vari-
ous colors of light depending on the tem-
perature. Natural light can be specified
by color temperature reflecting to the
color developed when carbon is burnt.
The light of 3,200K (K=Kelvin, j273°C
equals to absolute zero temperature OK)
represents the same value (color) as
what develops when carbon is burnt at
3,200K (2,927°C). The relationship be-
tween the color temperature of the light
source and...

17
   H.PHASE
   H.PHASE-COARSE       :03
   H.PHASE-FINE         :40 °° °°
_Black balance adjustment
≥Adjust it with the lens closed.
When the motor drive lens is controlled from the camera, adjusting the black balance
causes the lens to be automatically closed.
How to Adjust
_Gen lock adjustment
When multiple cameras are used or the camera is combined with other equipment, it is
necessary to adjust the phase for phase matching by external synchronization.
≥Horizontal phase adjustment
Observe the...

18
USER MENU
 1.MAINTENANCE
 2.SETTING
 3.CAM ID
 4.FILE MENU
  MAINTENANCE
   1.BLACK SHADING
   2.PED,GAMMA,FLARE
   3.KNEE,WHITE CLIP
   4.R/B GAIN
   5.DTL
   6.GAIN,AUTO IRIS
   7.S.GAIN 1
   8.S.GAIN 2
   9.S.GAIN 3
  10.FRAME MODE
  11.COLOR CORRECTION1
  12.COLOR CORRECTION2°°
   SETTING
   1.MODE
   2.SHUTTER
   3.H.PHASE°° °°
°°  CAM ID
ID:AKHC900°°
H H FILE MENU
   FILE                 :USER1
   (DATA REF            :PRESET)
   SAVE FILE?           :USER1
   SAVE                 :°°
File...

19
USER MENU
 1.MAINTENANCE
 2.SETTING
 3.CAM ID
 4.FILE MENU
Setting of Menu Items
_USER menu (Initial screen)
The readout data at start of power supply is
the data just before cutting off the power
supply, and the operation is started with the
data.
1. MAINTENANCE
It sets various adjusting data.
2. SETTING
It sets various modes.
3. CAM ID
It sets the camera ID.
4. FILE MENU
It executes file loading and saving, and
makes the basic setting of data display.
Menu operation is executed by the HD Controller...

20
  MAINTENANCE
   1.BLACK SHADING
   2.PED,GAMMA,FLARE
   3.KNEE,WHITE CLIP
   4.R/B GAIN
   5.DTL
   6.GAIN,AUTO IRIS
   7.S.GAIN 1
   8.S.GAIN 2
   9.S.GAIN 3
  10.FRAME MODE
  11.COLOR CORRECTION1
  12.COLOR CORRECTION2°°
 °BLACK SHADING°  
   DETECTION
   CORRECT(DIG)         :ON
Setting of Menu Items
!Maintenance menu
≥Move the cursor (arrow mark) to the item
to be adjusted and press the MENU key,
then it enters the adjustment menu there-
under.
≥Move the cursor to MAINTENANCE and
press the MENU...