Panasonic 8410 Operating Instructions Manual

							81
Using the Printer
&Output Order
Specifies whether the document exits face up or face down into the output
tray. This selection is not effective when the multi-purpose tray (MPT Plain
Paper, MPT Transparency, etc.) is selected in the Paper Source
( +P. 77). When the multi-purpose tray is selected, Face upis selected
automatically.
Hyper-Tetra Adjustment...
Adjusts the brightness, contrast, hue, saturation, or red, green, blue of the
image. For the adjustment, refer toUsing the Hyper-Tetra Adjustment
( 
+P. 93).
(Print as a Mirror image
Clicking on Print as a Mirror imageallows you to print a mirror image of
the document.
)Metafile Spooling
Specifies the format in which the printing information is stored on your disk
for printing. Generally, metafile spooling set to Enabledfrees up your
program faster than Disabled. 
						

							82
Using the Printer
n When Panasonic KX-P8410 Document Settings is
selected
#Undo Changed Option
Returns the Page Setupand Advancedtab’s settings to the previous
settings.
$About KX-P8410 Printer Driver...
Displays the window that contains the program version and copyright
information.
#
$ 
						

							83
Using the Printer
Click Start  , selectSettings, then clickPrinters.
The Printerswindow is displayed.
Click the Panasonic KX-P8410
icon.
Click the File menu, then click Properties.
The Panasonic KX-P8410 Propertieswindow is displayed.
Displaying the Panasonic KX-P8410 Properties Window 
(for Windows NT 4.0)
2 1
3
Click a tab to view the features.
Ports Tab( +P. 84)
SharingTab( 
+P. 88)
Device Settings Tab( 
+P. 91)
4
For the features of the other tabs, refer to the Help menu in the
Windows NT 4.0. 
						

							84
Using the Printer
#Checked port
Documents will print to the checked port.
$Add Port... button
Adds a new port ( +
P. 85 Installing the SCSI port)
Ports Tab (SCSI port)
Note:
BThis option is available only for Windows NT 4.0.
#
$ 
						

							85
Using the Printer
n Installing the SCSI port
Notes:
BWhen printing through the SCSI port, the access speed between other
connected SCSI devices get slower.
BTo connect the KX-P8410 to your SCSI port, a SCSI driver and ASPI Manager
need to be installed. Refer to your SCSI board manual.
Click  Add Port...  .
The Printer Portswindow appears.1
Click  New Monitor...  .
The Installing Print Monitorwindow appears.2 
						

							86
Using the Printer
Click  Browse....
Click  Cancel .
The Locate Filewindow is displayed.
Note:
BThe SCSI port cannot be installed through theMonitor.inffile copied to a
directory with long file name.
Insert the KX-P8410 Driver & Utility CD-ROMinto the CD-ROM
drive.
Select CD-ROM drive.
Open WinNT40, Disk2 then open Monitor.inffile.
Click  OK.
The Printer Portswindow is displayed.
3
4
5
6
7
8 
						

							87
Using the Printer
Click  New Port...  .
The Port Namewindow is displayed.
Type the port name (for example; KXP8410GDI), then click
OK.
The Printer Portswindow is displayed.
Click  Close.
9
10
11 
						

							88
Using the Printer
#Shared
To share the printer over the network. 
For the setup operation, refer to Sharing the printer with a client
computer( +
P. 89).
$Alternate Drivers
To install an alternate driver.
For the installation, refer to Installing an alternate driver( +
P. 89).
Sharing Tab
#
$ 
						

							89
Using the Printer
n Sharing the printer with a client computer
Click Shared.
Type the printer name (for example: KX-P8410).
Note:
BIf the shared printer is used through Windows 95, the printer name must not
exceed 12 characters.
Click  OK  .
n Installing an alternate driver (for example: Windows 95)
Select Windows 95, then click  OK  .
The Insert Diskwindow is displayed.
Click  OK  .
The Printer Drivers for Windows 95window is displayed.
Click  Browse...  .
1
2
3
1
2
3 
						

							90
Using the Printer
Click  Cancel  .
The Locate Filewindow is displayed.
Insert the supplied KX-P8410 Driver & Utility CD-ROMinto the
CD-ROM drive.
Select CD-ROM drive.
OpenWin95, Disk2, then open KXP8410.inffile.
The Printer Drivers for Window 95 window is displayed.
Click  OK  .
6
7
8 4
5