Panasonic Agya70p Operating Instructions Manual

							ENGLISH
Before attempting to connect, operate or adjust this product, please read these instructions completely.
AG- P
SDI Interface Board
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL 
						

							1 (E)
Installation of the AG-YA70
The AG-YA70 is an interface board that enables the AG-MX70 to be connected to a serial digital interface (SDI).
Follow the procedure below to install it.

Always consult your dealer or authorized service centre regarding installation of the AG-YA70 in the AG-MX70.
KEYEXT IN
Y
B P
R PMICPHONEUS
Y/VP /V5
YC
B
R P
Y/VP /V6
YC
B
R P
Y/VP /V7
YC
B
R P
Y/VP /V8
YC
B
R P VIDEO IN12
34VY
B P
VY
B PL
RL
RL
RL
123 AUDIO IN
Screws (6 pcs)
Screws
(20 pcs) Blank panel
2)Remove the six screws from the rear panel, then
remove the blank panel.
3)Open the top unit, including the LCD, from the front,
then release the bands securing the flexible cable and
blue cable of the unit.
4)Remove the power cable connected to the top unit,
then position the top unit upright.
When doing so, ensure the flexible and other cables
do not become detached.
5)Remove the twenty screws from the shield casing,
then remove the casing itself.
1)Turn off the power of the AG-MX70 and remove the
ten screws from the bottom panel.Screws (10 pcs) 
						

							2 (E)
ENGLISH
Installation of the AG-YA70
7)Insert the AG-YA70 board.
8)Insert the cable from the AG-YA70 into the connector
on the motherboard.
9)Secure the two screws which were removed in step
6).
10)Secure the shield casing and the twenty screws which
were removed in step 5).
11)Reattach the power cable removed in step 4).
When doing so, ensure that the power cable is
correctly inserted into the jack.
12)Re-attach the bands removed in step 3)and close the
top unit.
13)Secure the six screws which were removed in step 2).
14)Secure the ten screws which were removed in step
1).
Power Source:DC 5 V, 3.3 V
Power Consumption:6.3 W
indicates safety information.
Operating temperature:41 °F to 104 °F (+ 5 °C to + 40 °C)
Operating humidity:Less than 80%
Standard:SMPTE-259M-C standard complied with
Specifications
6)Remove the two hexagonal screws for anchoring the
AG-YA70 to the motherboard.
Fixing screws 
for AG-YA70 
						

							@
ji
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7000
EASTERN ZONE: 
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE: 
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850   (301) 738-3840
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:
Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3   (905) 624-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630   (787) 750-4300
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/