Home > Panasonic > Camera > Panasonic Aj D610wa Operating Instructions Manual

Panasonic Aj D610wa Operating Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Aj D610wa Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							– 111 –
    Set ting Menu Screens (MAIN menu)
    MAIN menu screen 4 of 4
    This screen displays the sub menu items on MAIN menu 4 of 4.
    |Note{
    It is not possible to open the MAIN menu screen 4 of 4 using the user menu.
    To open this screen, establish the engineer mode.
    MA I N ME NU 4 / 4
    USER MENU SE L 1 / 3
    USER MENU SE L 2 / 3
    USER MENU SE L 3 / 3
    AUTO SHAD I NG
    EVALUAT I ON
    INITIALIZE
    DIAGNOST ICEE¢
    EE EEEESUB menu
    USER MENU
    SEL 1/3
    USER MENU
    SEL 2/3
    USER MENU
    SEL 3/3
    AUTO SHADING
    EVALUATION
    INITIALIZE
    DIAGNOSTIC
    VF
    display
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    Remarks
    Index for opening the “USER MENU SEL 1 of 3”
    SUB menu.
    Index for opening the “USER MENU SEL 2 of 3”
    SUB menu.
    Index for opening the “USER MENU SEL 3 of 3”
    SUB menu.
    Index for opening the “AUTO SHADING” SUB
    menu.
    Index for opening the “EVALUATION” SUB
    menu.
    Index for opening the “INITIALIZE” menu.
    Index for opening the “DIAGNOSTIC” SUB menu. 
    						
    							– 112 –
    Menu screen display methods
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together.
    MAIN Menu Screen 1 of 4 (SUB menus)
    ROP screen
    The ROP (remote operation panel) settings are performed on this screen.
    ¢
    |
    ROP{
    MASTER
    MASTER
    MASTERPED
    µ
    00
    . 045
    µ
    000 µ
    000
    µ
    000
    µ
    000
    µ
    000
    µ
     :
    :
    :
    :
    :
    :
    :
    :
    000 DT L
    GAMMA
    RGAIN
    GA I N B
    R PEDES T A L
    PEDES T A L
    PEDES T A L G
    BItem
    MASTER PED
    MASTER DTL
    MASTER
    GAMMA
    R GAIN
    B GAIN
    R PEDESTAL
    G PEDESTAL
    B REDESTAL
    Remarks
    For setting the master pedestal level.
    This sets the H.DTL/V.DTL level.
    This sets the master gamma (in 0.01
    increments).
    Different settings for LOW, MID and
    HIGH can be stored in the memory.
    This sets the R channel gain.
    This sets the B channel gain.
    This sets the R channel pedestal level.
    This sets the G channel pedestal level.
    This sets the B channel pedestal level.
    VF
    display
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    USER
    ENG
    Variable
    range
    p100
     .
     .
     .
    o0
     .
     .
     .
    o100
    (max.)
    p15
     .
     .
     .
    o0
     .
     .
     .
    o15
    0.35
     .
     .
     .
    0.45
     .
     .
     .
    0.75
    p100
     .
     .
     .
    o0
     .
     .
     .
    o100
    (max.)
    p100
     .
     .
     .
    o0
     .
     .
     .
    o100
    (max.)
    p100
     .
     .
     .
    o0
     .
     .
     .
    o100
    (max.)
    p100
     .
     .
     .
    o0
     .
     .
     .
    o100
    (max.)
    p100
     .
     .
     .
    o0
     .
     .
     .
    o100
    (max.) 
    						
    							– 113 –
    |Note{
    The white balance and black bal-
    ance remain unchanged even when
    the MATRIX item settings are
    changed.
    The underlining in the variable range column indicates the setting in the preset mode.
    |Note{
    Two tables, A and B, can be stored for MATRIX TABLE.
    “00” is the setting for all the MATRIX TABLE B items in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together.
    MAIN Menu Screen 1 of 4 (SUB menus)
    MATRIX screen
    The camera’s matrix settings are performed on this screen.
    ¢
    |{
    : MA T R I X
    MA T R I X
    MA T R I X
    MA T R I X
    MA T R I X
    MA T R I X
    MA T R I X
    MA T R I XTA ABLE
    :
    µ
    14
    :
    µ
    11
    :
    µ
    06
    :
    µ
    08
    :
    µ
    06
    :
    µ
    02 R¶
    G
    R¶
    B
    G¶
    R
    G¶
    B
    B¶
    R
    B¶
    G
    È
    Item
    MATRIX TABLE
    MATRIX R-G
    MATRIX R-B
    MATRIX G-R
    MATRIX G-B
    MATRIX B-R
    MATRIX B-G
    Variable
    range
    A
    B
    p31
     .
     .
     .
    o14
     .
     .
     .
    o31
    p31
     .
     .
     .
    o11
     .
     .
     .
    o31
    p31
     .
     .
     .
    o6
     .
     .
     .
    o31
    p31
     .
     .
     .
    o8
     .
     .
     .
    o31
    p31
     .
     .
     .
    o6
     .
     .
     .
    o31
    p31
     .
     .
     .
    o2
     .
     .
     .
    o31
    Remarks
    This selects the color adjustment table.
    This adjusts the color.
    This adjusts the color.
    This adjusts the color.
    This adjusts the color.
    This adjusts the color.
    This adjusts the color.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    È indicates an ON/OFF setting. 
    						
    							– 114 –
    MAIN Menu Screen 1 of 4 (SUB menus)
    LOW SETTING screen
    The low level gain settings are performed on this screen.
    |Note{
    DARK DTL and LEVEL DEPEND
    serve opposite purposes: LEVEL
    DEPEND is automatically set to 0
    when DARK DTL is set to a value
    other than 0 and, conversely, DARK
    DTL is automatically set to 0 when
    LEVEL DEPEND is set to a value
    other than 0.
    The underlining in the variable range column indicates the setting in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together.
    Variable
    range
    p3 dB
     .
     .
     .
    0 dB
     .
     .
     .
    30 dB
    0
     .
     .
     .
    10
     .
     .
     .
    31
    0
     .
     .
     .
    10
     .
     .
     .
    31
    0
     .
     .
     .
    3
     .
     .
     .
    15
    1
     .
     .
     .
    3
     .
     .
     .
    5
    0
     .
     .
     .
    5
    0
     .
     .
     .
    15
    0.35
     .
     .
     .
    0.45
     .
     .
     .
    0.75
    ON
    OFF
    A
    B
    OFF
    Remarks
    This sets the gain to p3, 0, 3, 6, 9, 12,
    15, 18, 21, 24 or 30 dB.
    This sets the H.DTL (detail) level.
    This sets the V.DTL (detail) level.
    This sets the DTL coring.
    This selects the H.DTL frequency.
    1:2.5 MHz4:4 MHz
    2:3 MHz5:4.5 MHz
    3:3.5 MHz
    This sets the dark detail.
    This boosts the detail of the black
    areas.
    This sets LEVEL DEPEND.
    This eliminates the detail only in the
    dark areas when the Y detail is
    boosted. The higher the number
    selected, the wider the range across
    which the detail is eliminated.
    This sets the master gamma in
    0.01 increments.
    This selects ON or OFF for the mode
    in which low-illumination blackouts are
    compensated for.
    This selects the color compensation
    matrix table.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ¢
    |
    LOW SET T I NG{
    MASTER
    MASTERGA I N:
    :
    :
    :
    :
    :
    :
    :
    :
    :0dB
    H.DTL
    H.DTL
    DT LL EVE L
    L EVE L.DTL
    DT LL EVE L10
    V10
    CORING 03
    FREQ . 0 3
    DARK 0 0
    DEPEND . 0 0
    GAMMA 0.45
    B L ACK S TRE TCH OF F
    TABLE A MA T R I X
    È
    È
    È
    Item
    MASTER GAIN
    H.DTL LEVEL
    V.DTL LEVEL
    DTL CORING
    H.DTL FREQ.
    DARK DTL
    LEVEL DEPEND.
    MASTER
    GAMMA
    BLACK
    STRETCH
    MATRIX TABLE
    È indicates an ON/OFF setting. 
    						
    							– 115 –
    MAIN Menu Screen 1 of 4 (SUB menus)
    MID SETTING screen
    The middle level gain settings are performed on this screen.
    |Note{
    DARK DTL and LEVEL DEPEND
    serve opposite purposes: LEVEL
    DEPEND is automatically set to 0
    when DARK DTL is set to a value
    other than 0 and, conversely, DARK
    DTL is automatically set to 0 when
    LEVEL DEPEND is set to a value
    other than 0.
    The underlining in the variable range column indicates the setting in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together.
    ¢
    |
    MI D SETT I NG{
    5 MASTER
    MASTERGA I N:
    :
    :
    :
    :
    :
    :
    :
    :
    :9dB
    H.DTL
    H.DTL
    DT LL EVE L
    L EVE L.DTL
    DT LL EVE L10
    V10
    CORING 06
    FREQ 0 3
    DARK 0 0
    DEPEND . 0 3
    GAMMA 0 ..
    4
    B L ACK S TRE TCH OF F
    TABLE A MA T R I X
    È
    È
    È
    Item
    MASTER GAIN
    H.DTL LEVEL
    V.DTL LEVEL
    DTL CORING
    H.DTL FREQ.
    DARK DTL
    LEVEL DEPEND.
    MASTER
    GAMMA
    BLACK
    STRETCH
    MATRIX TABLE
    Variable
    range
    p3 dB
     .
     .
     .
    9 dB
     .
     .
     .
    30 dB
    0
     .
     .
     .
    10
     .
     .
     .
    31
    0
     .
     .
     .
    10
     .
     .
     .
    31
    0
     .
     .
     .
    6
     .
     .
     .
    15
    1
     .
     .
     .
    3
     .
     .
     .
    5
    0
     .
     .
     .
    5
    0
     .
     .
     .
    3
     .
     .
     .
    15
    0.35
     .
     .
     .
    0.45
     .
     .
     .
    0.75
    ON
    OFF
    A
    B
    OFF
    Remarks
    This sets the gain to p3, 0, 3, 6, 9, 12,
    15, 18, 21, 24 or 30 dB.
    This sets the H.DTL (detail) level.
    This sets the V.DTL (detail) level.
    This sets the DTL coring.
    This selects the H.DTL frequency.
    1:2.5 MHz4:4 MHz
    2:3 MHz5:4.5 MHz
    3:3.5 MHz
    This sets the dark detail.
    This boosts the detail of the black
    areas.
    This sets LEVEL DEPEND.
    This eliminates the detail only in the
    dark areas when the Y detail is
    boosted. The higher the number
    selected, the wider the range across
    which the detail is eliminated.
    This sets the master gamma in
    0.01 increments.
    This selects ON or OFF for the mode
    in which low-illumination blackouts are
    compensated for.
    This selects the color compensation
    matrix table.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    È indicates an ON/OFF setting. 
    						
    							– 116 –
    MAIN Menu Screen 1 of 4 (SUB menus)
    HIGH SETTING screen
    The high level gain settings are performed on this screen.
    |Note{
    DARK DTL and LEVEL DEPEND
    serve opposite purposes: LEVEL
    DEPEND is automatically set to 0
    when DARK DTL is set to a value
    other than 0 and, conversely, DARK
    DTL is automatically set to 0 when
    LEVEL DEPEND is set to a value
    other than 0.
    The underlining in the variable range column indicates the setting in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together.
    ¢
    |
    HIGH SETT ING{
    5 MASTER
    MASTERGA I N:
    :
    :
    :
    :
    :
    :
    :
    :
    :18dB
    H.DTL
    H.DTL
    DT LL EVE L
    L EVE L.DTL
    DT LL EVE L V
    CORING 10
    FREQ 0 310
    10
    DARK 0 0
    DEPEND . 0 8
    GAMMA 0 ..
    4
    B L ACK S TRE TCH OF F
    TABLE A MA T R I X
    È
    È
     È
    Item
    MASTER GAIN
    H.DTL LEVEL
    V.DTL LEVEL
    DTL CORING
    H.DTL FREQ.
    DARK DTL
    LEVEL DEPEND.
    MASTER
    GAMMA
    BLACK
    STRETCH
    MATRIX TABLE
    Variable
    range
    p3 dB
     .
     .
     .
    18 dB
     .
     .
     .
    30 dB
    0
     .
     .
     .
    10
     .
     .
     .
    31
    0
     .
     .
     .
    10
     .
     .
     .
    31
    0
     .
     .
     .
    10
     .
     .
     .
    15
    1
     .
     .
     .
    3
     .
     .
     .
    5
    0
     .
     .
     .
    5
    0
     .
     .
     .
    8
     .
     .
     .
    15
    0.35
     .
     .
     .
    0.45
     .
     .
     .
    0.75
    ON
    OFF
    A
    B
    OFF
    Remarks
    This sets the gain to p3, 0, 3, 6, 9, 12,
    15, 18, 21, 24 or 30 dB.
    This sets the H.DTL (detail) level.
    This sets the V.DTL (detail) level.
    This sets the DTL coring.
    This selects the H.DTL frequency.
    1:2.5 MHz4:4 MHz
    2:3 MHz5:4.5 MHz
    3:3.5 MHz
    This sets the dark detail.
    This boosts the detail of the black
    areas.
    This sets LEVEL DEPEND.
    This eliminates the detail only in the
    dark areas when the Y detail is
    boosted. The higher the number
    selected, the wider the range across
    which the detail is eliminated.
    This sets the master gamma in
    0.01 increments.
    This selects ON or OFF for the mode
    in which low-illumination blackouts are
    compensated for.
    This selects the color compensation
    matrix table.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    È indicates an ON/OFF setting. 
    						
    							– 117 –
    MAIN Menu Screen 1 of 4 (SUB menus)
    ADDITIONAL DTL screen
    The special detail settings of the camera are performed on this screen.
    µ
    00
    µ
    16 ADDITIONAL
    CCOMPE.:
    :
    :
    :
    :
    :
    :
    :
    :OF F
    OF F
    O CHROMA 0
    KNEE APERTURE ON
    N SL I M
    CORN E R
    GA I N(
    µ
    )
    CL I P 0 0
    H. L INE MIX 1H
    ¢
    |
    DT L
    DT L
    DT L
    DT L
    DT L
    GA I N(
    ¶
    )
    DT L
    DT L
    DT L DT L{
    È
    È
    È
    È
    Item
    C DTL COMPE.
    CHROMA DTL
    KNEE
    APERTURE
    SLIM DTL
    CORNER DTL
    DTL GAIN (o)
    DTL GAIN (p)
    DTL CLIP
    H.DTL LINE MIX
    Variable
    range
    ON
    OFF
    0–2
    ON
    OFF
    ON
    OFF
    ON
    OFF
    p31
     .
     .
     .
    o0
     .
     .
     .
    o31
    p31
     .
     .
     .
    o16
     .
     .
     .
    o31
    0
     .
     .
     .
    31
    0H
    1H
    2H
    Remarks
    This selects ON or OFF for the chroma
    DTL.
    This sets the chroma DTL.
    This detects the chroma edge and
    superimposing it onto Y to boost the H
    detail.
    The higher the number selected, the
    greater the level of compensation
    provided.
    This selects ON or OFF for the knee
    aperture.
    This boosts the detail above the knee
    point.
    This selects ON or OFF for mode in
    which the detail is made finer.
    This selects ON or OFF for mode
    which increases the resolution at the
    edges of the screen.
    This changes the H detail level in the
    “o” direction.
    This changes the H detail level in the
    “p” (downward) direction.
    This changes the clipping of the detail
    signals in the “o” direction.
    This sets the addition of the scanning
    lines for generating H detail signals.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    The underlining in the variable range column indicates the setting in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together. È indicates an ON/OFF setting. 
    						
    							– 118 –
    MAIN Menu Screen 1 of 4 (SUB menus)
    SKIN TONE DTL screen
    The camera’s skin tone detail settings are performed on this screen.
    Item
    SKIN TONE DTL
    SKIN TONE HUE
    SKIN TONE
    LEVEL
    SKIN TONE
    WIDTH
    SKIN TONE
    CORING
    SKIN TONE
    ZEBRA
    Variable
    range
    ON
    OFF
    103
     .
     .
     .
    143
    1
     .
     .
     .
    25
     .
     .
     .
    50
    1
     .
     .
     .
    15
     .
     .
     .
    30
    1
     .
     .
     .
    5
    ON
    OFF
    Remarks
    This selects ON or OFF for the skin
    tone detail.
    This sets the skin tone hue (for setting
    the phase of the skin tone detection
    range).
    The hue is changed in the phase
    direction.
    This sets the skin tone level (for setting
    the intensity of the colors in the skin
    tone detection range).
    The level is changed in the amplitude
    direction.
    This sets the skin tone width
    This sets the range of colors to be
    treated as the skin tone from among
    the colors set by SKIN TONE HUE and
    LEVEL.
    The higher the number selected, the
    wider the skin tone range.
    This sets the skin tone coring.
    The amount of detail in the skin tone
    range is changed.
    This selects ON or OFF for ZEBRA in
    the skin tone range.
    This changes the coring in the range
    across which ZEBRA can be seen.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    The underlining in the variable range column indicates the setting in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together. È indicates an ON/OFF setting.
    |Note{
    All the displays except the change
    data are cleared while the hue, level,
    width and coring data of the skin
    tone is being changed.
    The underlining in the variable range
    column indicates the setting in the
    preset mode.
    SK I N TONE
    SK I N TONE
    SK I N TONE
    SK I N TONE
    SK I N TONE
    SK I N TONE
    SK I N TONE:
    :
    :
    :
    :OF F
    15
    05
    :
    OF F103
    25¢
    |
    DT L
    DT L
    HUE
    LEV
    WID
    COR
    ZEBREL
    TH
    IGN
    A{
    È
    È
     
    						
    							– 119 –
    MAIN Menu Screen 1 of 4 (SUB menus)
    KNEE/LEVEL screen
    The knee level settings of the camera are performed on this screen.
    The underlining in the variable range column indicates the setting in the preset mode.
    USER menu:The USER menu appears when the MENU switch is set to SET.
    ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
    held down together.
    00 M. PED:
    0 KNEE / L EVE
    ¢
    |
    L{
    È
    :
    :
    :
    :
    :
    :
    :% MA NU A L ON
    PO I N T
    PO I N T85
    SLOPE 1 6
    WH I TE CL I PWH I TE CL I PON
    LVL
    LVL105% 7.5 A SETUP:
    25
    AUTO
    AUTO085
    105 KNEE
    KNEE
    KNEE
    KNEE
    KNEE
    È
    È
    µ
    È indicates an ON/OFF setting.
    Item
    M.PED
    SET UP 25
    MANUAL KNEE
    KNEE POINT
    KNEE SLOPE
    WHITE CLIP
    WHITE CLIP LVL
    AUTO KNEE
    POINT
    AUTO KNEE LVL
    Variable
    range
    p100
     .
     .
     .
    o000
     .
     .
     .
    o100
    0%
    7.5%
    7.5%A
    ON
    OFF
    75
     .
     .
     .
    85
     .
     .
     .
    102
    0
     .
     .
     .
    16
     .
     .
     .
    25
    ON
    OFF
    90%
     .
     .
     .
    105%
     .
     .
     .
    110%
    75
     .
     .
     .
    85
     .
     .
     .
    100
    100
     .
     .
     .
    105
     .
     .
     .
    110
    Remarks
    This sets the master pedestal level.
    This selects the setup level.
    0%:0% setup for both the camera
    output and tape.
    7.5%:7.5% setup for both the camera
    output and tape.
    7.5%A:7.5% setup for the camera
    output; 0% setup for the tape.
    F
    When the setup level is changed to 7.5%A,
    the chroma level and burst level on the
    CAM ENC circuit board must be re-
    adjusted.
    This sets the mode to be established
    when the AUTO KNEE switch is set to
    OFF.
    This sets the manual knee point
    position.
    This sets the manual knee slope.
    This selects ON or OFF for the white
    clip.
    This sets the white clip level.
    This sets the automatic knee point
    position.
    This sets the maximum level of the
    automatic knee.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG 
    						
    							– 120 –
    Item
    R FLARE
    G FLARE
    B FLARE
    R GAMMA
    B GAMMA
    Variable
    range
    0
     .
     .
     .
    100
    0
     .
     .
     .
    100
    0
     .
     .
     .
    100
    p15
     .
     .
     .
    o0
     .
     .
     .
    o15
    p15
     .
     .
     .
    o0
     .
     .
     .
    o15
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    MAIN Menu Screen 1 of 4 (SUB menus)
    FLARE/GAMMA screen
    The flare and gamma settings of the camera are performed on this screen.
    µ
    00 µ
    00
    F L ARE
    F L ARE
    F L ARE
    F L ARE/ GAMMA
    GAMMA
    GAMMA{
    R:
    000
    G:
    000
    B:
    000
    R:
    B:¢
    |
    CAMERA SETTING screen
    The basic settings of the camera are performed on this screen. Before each screen item is an asterisk (“E”) or dot (“.”) which
    respectively indicates whether the setting is ON or OFF.
    E:ON
    .
     : OFF
    Item
    DETAIL
    2D LPF
    SUPER COLOR
    GAMMA
    TEST SAW
    FLARE
    H-F COMPE.
    NEGATIVE DTL
    Variable
    range
    ON
    OFF
    ON
    OFF
    ON
    OFF
    ON
    OFF
    ON
    OFF
    ON
    OFF
    ON
    OFF
    ON
    OFF
    Remarks
    This selects ON or OFF for the H and
    V detail. (The ON or OFF setting
    applies to both the H and V detail.)
    This selects ON or OFF for the
    2-dimensional low-pass filter, which
    reduces cross-color.
    This selects ON or OFF for the mode
    in which the dynamic range of the
    color is to be expanded.
    The item is used to boost the color
    above the knee point.
    This selects ON or OFF for the gamma
    correction.
    This selects ON or OFF for the test
    signal.
    This selects ON or OFF for the flare
    compensation.
    This selects ON or OFF for the mode
    in which the high-frequency detail is
    enhanced.
    This selects ON or OFF for the DTL
    signal from the setup level (7.5%) to
    the blanking level.
    VF
    display
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    ENG
    C AME R A / S E T T I NG{
    EDETA I L.2D LPFESUPER COLOR
    ENEGA T I V E D T L
    EGAMMA.TEST SAWEF L AREEH¶
    FCOMPE
    ¢
    |
    The underlining in the variable range
    column indicates the setting in the
    preset mode.
    USER menu:The USER menu ap-
    pears when the
    MENU switch is set
    to SET.
    ENG menu:The ENG menu ap-
    pears when the
    MENU switch is set
    to SET while the
    SHIFT/ITEM button
    and UP button are
    held down together.
    Remarks
    This sets the R channel flare.
    The preset value differs depending on
    the camera.
    This sets the G channel flare.
    The preset value differs depending on
    the camera.
    This sets the B channel flare.
    The preset value differs depending on
    the camera.
    This sets the correction value for the R
    channel gamma in respect of the
    master gamma level.
    This sets the correction value for the B
    channel gamma in respect of the
    master gamma level. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Aj D610wa Operating Instructions Manual