Panasonic Aj D700_200dpi Operating Instructions Manual

Replacing the Backup Battery
The unit is shipped from the factory with a backup battery already mounted. When the battery runs
out, the TCG time code value indicates 00:00:00:00.
At this time, the time code value cannot be backed up.
In addition, the “BACK UP BATT EMPTY” display appears in the viewfinder for 3 seconds when
the POWER switch is set to ON to indicate that the battery must be replaced.
Consult your dealer when replacing the battery.
Backup Battery
-101- 

Setting Menu Screens 

VF DISPLAY Screen
This page sets the setting for the display information inside the viewfinder.
Item– VF DISPLAY –
DISP MODE :3
EXTENDER :ON
SHUTTER :ON
TAPE :ON
BATTERY:ONFILTER:ONWHITE:ONGAIN:ONLEVEL METER:ON
IRIS :S+IRI S
CAMERA ID
:ON
Menu screen display methods
USER menu: Setting the MENU
switch to SET displays the USERmenu.
ENG menu:Holding down the
SHIFT/ITEM and UP
buttons
simultaneously and
setting the MENU
switch to SET
displays the ENG menu. DISP MODE
EXTENDER
SHUTTER
TAPE BATTERYFILTER
WHITE...

Setting Menu Screens
CAMERA ID Screen
This page performs the camera ID settings. Each time the UP button is pressed, the character display changes in the orde\
r ofspace, English letters (A to Z), numbers (0 to 9) and symbols [space, >, 

SYNCHRO SCAN Screen
This page performs the synchro scan settings.
– SYNCHRO SCAN –
1/61.7
Item
SYNCHRO
SCAN
Variable VF
rangedisplay Remarks
1/30.4
1/61.7
1/250
USER
ENG
Synchro shutter speed selection
! LED Screen
This page sets the ON/OFF setting for the ! LED display inside the viewfinder. The ON/OFF status for each item is indica\
ted by
displaying an asterisk (*) or period (.) in front of the item on the screen.
– !LED –
* GAIN(0dB )
. GAIN(–3dB)
*
SHUTTER. WHITE PRESET
*
EXTENDER. FILTE R
. SUPER...

Setting Menu Screens
SET UP CARD Screen
This page sets the loading, saving and formatting operations for setup cards. Align the “–” with the desired item and press the
UP or DOWN button to perform the corresponding processing.
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ONItem
READ( CAM)
WRITE
( CARD)
CARD CONFIG.
ID READ/WRITE
FUNC1~2 R/W
L/M/H SET R/W
LEVEL1~6 R/W
Variable
range
ON
OFF
VF
display
USER
ENG
USER
ENG
USER
ENG...

MAIN FUNCTION Screen 

Setting Menu Screens
FUNCTION 1/5 Screen
This page performs the adjustment function 1 settings. The ON/OFF status for each item is indicated by displaying an ast\
erix (*)or period (.) in front of the item on the screen.
– FUNCTION 1/5 –Item
*DETAIL
*2D LPF
SKIN TONE DTL
*MATRIX
*GAMMATEST SAW
*FLARE
DETAIL
2D LPF
SKIN TONE DTL
*: ON
·:OFFMATRIX
GAMMA
TEST SAW
FLARE
FUNCTION 2/5 Screen
This page performs the adjustment function 2 settings.
– FUNCTION 2/5 –
SUPER V
: FRM1FILTER INH :OFFSHOCKLESS...

FUNCTION 3/5 Screen 

Setting Menu Screens