Panasonic Aj D700_200dpi Operating Instructions Manual

							LENS ADJ Screen
This page performs the lens adjustments. The ON/OFF status for each item is indicated by displaying an asterix (*) or period (.)
in front of the item on the screen.
– LENS ADJ –
*F2.8 ADJItemVariable VF
rangedisplayRemarks
*F16 ADJF2.8 ADJENGVoltage is output only when selected by
the cursor (arrow).
F16 ADJ
ENGVoltage is output only when selected by
the cursor (arrow).

*: ON
·: OFF
When using a lens which allows the lens iris open or close end to be adjusted, set
either “F2.8 ADJ” or “F16 ADJ” to ON and repeatedly adjust the lens iris until it is
“F2.8” or “F16”, respectively. (Fujinon S18 
× 6.7 BRM4/BERM4 lenses do not have
this adjustment function.)
MENU SELECT 1/3 Screen
This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an
asterix (*) or period (.) in front of the item on the screen.
– MENU SELECT 1/3 –
*MARKER
ItemVariablerange
*VF DISPLAY
*CAMERA ID
·SHUTTER SPEED
*SYNCHRO SCAN·! LED
*SET UP CARD
MARKER
VF DISPLAYON
OFF
ON
OFF
*MAIN FUNCTION
·BATT/TAPE ALARMCAMERA IDON
OFF
*: ON
·: OFFSHUTTER
SPEED
SYNCHRO
SCAN
!LED
SET UP CARD
MAIN FUNCTION
BATT/TAPE
ALARM
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
VF
display
ENG
Remarks
MARKER item user menu display
ON/OFF
ENGVF DISPLAY item user menu display
ON/OFF
ENGCAMERA ID item user menu display
ON/OFF
ENGSHUTTER SPEED item user menu
display ON/OFF
ENGSYNCHRO SCAN item user menu
display ON/OFF
ENG!LED item user menu display ON/OFF
ENGSET UP CARD item user menu display
ON/OFF
ENGMAIN FUNCTION item user menu
display ON/OFF
ENGBATT/TAPE ALARM item user menu
display ON/OFF
ON:This switches the display ON.
OFF:This switches the display OFF.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu:Setting the MENU switch to SET displays the USER menu.
ENG menu:Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
-121- 
						

							Setting Menu Screens
MENU SELECT 2/3 Screen
This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an
asterix (*) or period (.) in front of the item on the screen.
– MENU SELECT 2/3 –Item
.FUNCTION1/5
.FUNCTION 2/5FUNCTION 1/5.FUNCTION3/5
.FUNCTION4/5
.FUNCTION5/5
.TIME/DATE
FUNCTION2/5
.LOW SETTING
.MID SETTING
.HIGH SETTING
FUNCTION 3/5
*: ONFUNCTION 4/5
·: OFF
FUNCTION 5/5
TIME/DATE
LOW SETTING
MID SETTING
HIGH SETTING
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
Remarks
FUNCTION 1/5 item user menu display
ON/OFF
FUNCTION 2/5 item user menu display
ON/OFF
FUNCTION 3/5 item user menu display
ON/OFF
FUNCTION 4/5 item user menu display
ON/OFF
FUNCTION 5/5 item user menu display
ON/OFF
TIME/DATE item user menu display
ON/OFF
LOW SETTING item user menu display
ON/OFF
MID SETTING item user menu display
ON/OFF
HIGH SETTING item user menu
display ON/OFF
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu:
Setting the MENU switch to SET displays the USER menu.
ENG menu:Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
-122- 
						

							MENU SELECT 3/3 Screen
This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an
asterix (*) or period (.) in front of the item on the screen.
– MENU SELECT 3/3 –Item
.LEVEL 1/6
.LEVEL 2/6LEVEL 1/6.LEVEL 3/6
.LEVEL 4/6
.LEVEL 5/6 .LEVEL 6/6
LEVEL 2/6
.VF OPERATION.LENS ADJ
LEVEL 3/6
*: ONLEVEL 4/6
·: OFF
LEVEL 5/6
LEVEL 6/6
VF OPERATION
LENS ADJ
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
Remarks
LEVEL 1/6 item user menu display
ON/OFF
LEVEL 2/6 item user menu display
ON/OFF
LEVEL 3/6 item user menu display
ON/OFF
LEVEL 4/6 item user menu display
ON/OFF
LEVEL 5/6 item user menu display
ON/OFF
LEVEL 6/6 item user menu display
ON/OFF
VF OPERATION item user menu
display ON/OFF
LENS ADJ item user menu display
ON/OFF
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods USER menu:
Setting the MENU switch to SET displays the USER menu.
ENG menu:Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
-123- 
						

							AUTO SHADING Screen
Setting Menu Screens 
						

							If trouble is detected immediately after the power is turned on or durin\
g operation, the display window (LCD), WARNING lamp,
Warning System 
						

							Warning System 
						

							Error Codes
When an error occurs in the unit for some reason or other, the following error codes appear in the
display window.
ContentsCode
No.
8
9
A
B
C
D
E
F
Solenoid trouble
The servo is not locked.
Condensation has occurred.
Supply reel trouble
Take-up reel trouble
Capstan trouble
Cylinder trouble
Loading trouble
Maintenance
Condensation
If the unit is moved from a cold location to a warm location or used in areas with high humidity, the
moisture in the air may adhere as water droplets on the head drum. This is called condensation,
and if the tape is run under these conditions, it will easily stick to the drum. Therefore, the following
points should be observed.
If the unit is moved under conditions where condensation may occur, eject the tape.
Before inserting the tape, set the POWER switch to ON and check that the HUMID display in the
display window is not lighted. If the HUMID display is lighted, do not insert the tape until the
display goes off.
The HUMID display
is not lighted.
-127- 
						

							Maintenance
Cleaning the Video Heads
Use the AJ-CL12MP cleaning cassette when head cleaning is required. Improper use of the
cleaning cassette may damage the video heads. Therefore, read the Handling Instructions for the
cleaning tape carefully before use.
Cleaning the Viewfinder
Do not use thinner or other solvents to remove dirt from the viewfinder.
Wipe the lens with lens cleaner available on the market.
Absolutely do not wipe the mirror. If dirt, etc. has adhered to the mirror, remove it using a air
blower available on the market.
Characteristic Phenomenon of CCD Cameras
Smear
Smear occurs when shooting high-intensity subjects, and occurs more easily as the electronic
shutter speed increases.
-128- 
						

							Inspections Before Shooting
Perform the following inspections before shooting to check that all systems are operating properly.
Checking the image with a color monitor is recommended.
Inspection Preparations
2
1
3
4
2
1Insert a charged battery pack.
2Set the POWER switch to ON and check that the HUMID display does not appear and that
five or more bars of the remaining battery level display are lighted.
If the HUMID display appears, wait until the display goes off.
If five or more bars of the remaining battery level display are not lighted, replace the battery
pack with a sufficiently charged battery pack.
3Check that there are no cables, etc. around the cassette holder and top panel, and then press
the EJECT button to open the cassette holder.
4Check the following items, and then insert a cassette and close the cassette holder.
The cassette is not set to the write protect status.
There is no slack in the tape.
Inspecting the Camera Section
Set the switches as follows.
Iris: AUTO
Zoom: AUTOWHITE BAL: A or B
OUTPUT: BARS
Gain: Set the smallest gain value possible.
VTR SAVE/STBY: STBY
-129- 
						

							Inspections Before Shooting
Inspecting the Viewfinder
1
2
3
4
5
6
7
8
9
Adjust the position of the viewfinder.
Check that the color bar appears on the viewfinder screen, and then adjust the BRIGHT,
CONTRAST and PEAKING controls so that the color bar appears clearly on the viewfinder.
Check the following items.
(1) Set the MENU SET/OFF switch to SET and check that the setting menu appears on the
viewfinder screen.
(2)Press the PAGE button and check that the setting menu page changes.
(3)Press the SHIFT/ITEM switch and check that the cursor moves within the page.
(4) Press the UP or DOWN button to check that the setting or ON/OFF display of the item
selected with the cursor changes.
Set the OUTPUT/AUTO KNEE switch to CAM and switch the FILTER knob to 1, 2, 3 and 4.
Check that the number of the FILTER display on the viewfinder screen changes in accor-
dance with the knob position.
Perform the following operations to check that the (!) lamp lights when the items set to ON at
the (!) LED page are operated.
(1)Set the gain to any value other than 0 dB with the GAIN switch.
(2)Set the SHUTTER switch to ON.
(3)Set the WHITE BAL switch to PRST.
(4) Insert the lens extender.
(5)Set the FILTER knob to any position other than “1”.
Press the SHUTTER switch repeatedly from the ON position to the SEL side and check that
the shutter setting on the viewfinder screen changes.
Aim the lens at an appropriate subject and turn the focus ring to bring the subject into focus.
Check the image appearing in the viewfinder.
Set both the AUDIO IN CH1 and CH2 switches to FRONT [MIC] and set LEVEL METER on
the VF DISPLAY page of the setting menu to ON. Check that the audio level appears on the
viewfinder screen when sound is input from the microphone connected to the MIC IN jack on
the front panel. Then, check that the audio level disappears from the viewfinder screen when
LEVEL METER on the VF DISPLAY page of the setting menu is set to OFF.
Check that the zebra pattern appears on the viewfinder screen when the ZEBRA switch is set
to ON, and disappears when the ZEBRA switch is set to OFF.

The items and functions in steps 3 to 6 may not be displayed or may not operate depending on the
setting conditions. Set the unit to engineer mode, set DISPLAY MODE on the VF DISPLAY page
of the setting menu to “3”, and then set the required items at the SHUTTER SPEED, (!) LED and
MENU SELECT 1/3 to 3/3 pages.
-130-