Panasonic Aj Hdc27fp Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hdc27fp Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 101
101 SHUTTER SELECT screen A shutter speed is set in each POSITION item on this screen. ItemVariable rangeRemarks SYNCHRO SCAN 290.0 deg : 180.0 deg : 225.0 deg VF display ENG For selecting the shutter speed which is to be set in SYNCHRO SCAN 2. POSITION 1 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 1. POSITION 2 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg...
Page 102
102 CAMERA SW MODE screen The modes of the camera switches are set on this screen. ItemVariable rangeRemarks FILTER INH ONOFF VF display USER ENGFor selecting whether or not the data in the AWB memories (channel A, channel B) is to be held for each filter. ON: Only the channel A and channel B memories (2 memories) regardless of the filter. OFF: The data is held for each of the filters (4a2 = 8 memories). SHOCKLESS AWBOFFNORMAL SLOW FASTUSER ENGFor selecting the SHOCKLESS AWB setting. “SHOCKLESS AWB”...
Page 103
103 ItemVariable rangeRemarksVF display CAMERA SW MODE screen USER2 SW (CAM MENU) (FILM MENU)INH S.GAIN S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW USER ENGFor allocating the functions in USER2 SW. OWhen B.STR has been selected as this item’s setting, the function for setting the black level gradation compensation to +3 is allocated. OWhen Y GET has been selected as this item’s setting, the function for measuring the output luminance level is allocated. The output luminance level of the...
Page 104
104 The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 SUPER GAIN screen The gain allocated to the SUPER GAIN switch is set on this screen. ItemVariable rangeRemarks S. GAIN VALUE 18dB24dB 30dB 36dB VF display USER ENGFor selecting the gain when the SUPER GAIN switch is pressed. FRAME MODE screen The frame rate is set on this screen. ItemVariable rangeRemarks FRAME RATE RANGE60-1260-4 VF display USER ENGFor selecting the...
Page 105
105 CAM CARD R/W SELECT screen ItemVariable rangeRemarksVF display CAM CARD R/W SELECT screen The settings for saving (recording) specific menu data on the setup card and loading (reading) the data from the card are performed on this screen. ItemVariable rangeRemarks ID READ/WRITE ON OFF VF display USER ENGFor setting camera ID saving/loading when writing data onto the setup card or loading data from it to ON or OFF. ON:The camera ID is recorded/loaded. OFF:The camera ID is not recorded/loaded. Example:...
Page 106
106 Setting menu screens FILM (CAM) MAIN MENU 3 GENLOCK/IRIS screen The genlock and iris control settings are performed on this screen. ItemVariable rangeRemarksVF display H PHASE COARSE0 : 7 : 15 USER ENGFor coarsely adjusting the H phase during genlock. H PHASE FINE 0 : 32 : 64 USER ENGFor finely adjusting the H phase during genlock. A. IRIS LEVEL 0 : 50 : 100 USER ENGFor setting the auto iris target level. The brightness (iris) is controlled using this value. The higher the value selected, the higher...
Page 107
107 Setting menu screens FILM (CAM) MAIN MENU 4 FILM (CAM) USER MENU SELECT 1, 2 and 3 screens The settings for registering the items (the same as the ones on the FILM or CAM MAIN MENU 1, 2 and 3 screens) allocated to the SUB menus to the SUB MENU screen are performed on this screen. Registration ON (¢ ) or OFF (≥) is set at the head of each item. Up to 42 camera unit items can be registered. FILM (CAM) USER MENU SELECT 1 screen SUB menuVF displayRemarks ROPENG Index for opening the ROP screen. LOW...
Page 108
108 BLACK SHADING screen The black shading adjustments are performed on this screen. ItemVariable rangeRemarks DETECTION==VF displayENG For execution of the digital shading compensation. CORRECT (DIG) ONOFFENG For setting the digital shading compensation to ON or OFF. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 4 WHITE SHADING screen The white shading adjustments are performed on this screen. ItemVariable rangeRemarks...
Page 109
109 The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 4 DIAGNOSTIC screen The usage statuses and software versions are displayed on this screen. ItemVariable rangeRemarks CAMSOFT (IN)==VF displayENG For displaying the version of the software for the built-in flash memory. CAMSOFT (OUT)==ENG For displaying the version of the software for the external flash memory. CAM TABLE==ENG For displaying the version of the gamma table....
Page 110
110 Setting menu screens FILM (CAM) MAIN MENU 4 EVALUATION screen The underlining in the variable range column indicates the setting in the preset mode. OS/N measurement screen The S/N measurements are performed on this screen. ItemVariable rangeRemarks S/N VF display ENGFor setting the S/N measurement. DETAIL ON OFFENG For setting the DETAIL to ON or OFF. H-F COMPE. ON OFFENG For setting the high- frequency compensation to ON or OFF. GAMMA ON OFFENG For setting the GAMMA to ON or OFF. MATRIX ON OFFENG...