Panasonic Aj Ufc1800 Operating Instructions Manual

11
ZOOM H,VPress ZOOM H(F2) and ZOOM V(F3) to change the zoom factor.  This will lock the
horizontal and vertical adjustments together.  Turn the knob to set the desired size.
   EXITPress EXIT to go to the CROP menu.
L, R, T, BPress LEFT(F1), RIGHT(F2), TOP(F3) or BOTTOM(F4) to remove portions of the input
frame.  Small adjustments can be made by successively pushing the function keys or the
knob can be used to easily cover the full range of control.
   EXITPress EXIT to view the resizing PRESETS menu....

12 For 24Hz interlaced(segmented) input:
VIDEO INPress VIDEO IN to select the input format and 24Hz frame rate.
FORMATPress FORMAT(F1) to select an HxV interlaced value.  Pressing the function key or
turning the knob will cycle through the range of choices.
 F RATEPress F RATE(F2) to select a 23.98/24Hz frame rate.  Pressing the function key or
turning the knob will cycle through the range of choices.
PULLDNPress PULLDN(F3) to select the 2:2 pull-down mode.  Pressing the function key or
turning the knob...

13
MENU TREE
HOME
F1 F2 F3 F4 F5
VERSION DEFAULTS
PRESET
F1 F2 F3 F4 F5
SAVE RECALL TITLE DELETE (DETAILS)
TITLE
F1 F2 F3 F4
 SP/CLR SAVE
VIDEO IN
F1 F2 F3
FORMAT F RATE PULLDN
VIDEO OUT
F1 F2 F3
FORMAT F RATE FLD/FRM
FILTER
F1 F2 F3 F4 F5
H RESP V RESP H ENH V ENH 2-D ENH
TIMING      SYSTEM
F1 F2 F3 F4
REF IN GL TYPE LIN ADV SYS H
    FILM MODE
F1 F2 F3
“A” POS 3:2 REF TC SYNC
RESIZE
     ZOOM/PAN
F1 F2 F3 F4 F5
ZM MODE ZOOM H ZOOM V PAN H PAN V
     CROP
F1 F2 F3 F4
LEFT RIGHT TOP BOTTOM
     PRESETS...

14 DIAG
F1 F2 F3 F4 F5
ALL↓MON’D↓TRIG’D↓RETRIG MON/MASK
ALL, MON’D, TRIG’D
F1 F3 F5
MASK TRG TYPE (RETRIG)
AUDIO      INPUT SELECTION
F1 F2
CH1-4 CH5-8
     SYNCHRO
F1 F2
CH1-4 CH5-8
     DELAY
F1
DELAY
TEST      SIG GEN
F1 F2
SELECT F STORE
SETUP      BACKGROUND COLOR
F1 F2 F3 F4
BG COL CUST R CUST G CUST B
     POWER UP
F1 F2
STATE SELECT
     TIME CODE-INPUT
F1
SOURCE
     TIME CODE-OUTPUT
F1 F2 F3 F4 F5
EXT_LTC S_VITC VITC1 VITC2 DF MODE
 (EXT_LTC) (S_VITC)  (S_LTC) (DF_MODE)
      LOCK
F1 F2 F3...

15
Front Panel Controls
All operation of the AJ-UFC1800 is performed by means of the front panel controls.  These controls are used to
activate presets, select input and output formats, adjust control settings, and perform diagnostic testing.  The front
panel consists of a 4x40 character display, 5 function buttons, an EXIT button, 12 menu buttons, and a control knob
for making adjustments.  There is also a LOCAL/REMOTE switch to select either front panel or remote control
modes.  In remote mode, the...

16
Preset Menu
The PRESET menu is activated by pushing the PRESET button on the UFC front panel.  This menu allows the user
to look at preset system configurations that have been saved in memory.  All system parameters are stored in a
preset file, including input and output formats, zoom & pan settings, timing adjustments, etc.  Up to 16 preset files
are stored in the system, and can be saved or recalled from this menu.  The first eight presets can be password
protected.
PRESET
SYSTEM PRESET 1
TITLE: HD...

17
Video In Menus
The VIDEO IN menus are activated by pushing the VIDEO IN button on the UFC front panel.  These menus allow
the user to select the input video format for the system. The format, and frame rate, are selected independently, with
the system providing feedback to the user if the format & frame rate selected are not compatible.  These menus also
allow the user to select film processing modes and to select the source of the 3:2 reference.  Pull-down mode selects
the frame processing that will...

18
Filter Menu
The FILTER menu is activated by pushing the FILTER button on the UFC front panel. This menu allows the user to
select the filtering and enhancement responses for the system.  The user may select different responses or
enhancement settings depending upon the type of conversion being done (up or down) or the nature of the source
material (soft material may need more enhancement, noisy material may need less).
FILTER
H RESP V RESP H ENH V ENH 2-D ENH
F1 F2 F3 F4 F5 EXIT
F1 – Activates knob to...

19 FILM MODE
TIMING >> FILM MODE
“A“ POS 3:2 REF TC SYNC
F1 F2 F3 F4 F5 EXIT
F1 – Activates knob to manually set the A Frame position or to offset the position from the nominal value when
triggering from an external reference.
F2 – Activates knob to select the source of the 3:2 reference (EXT, TIME CODE or MANUAL).
F3 – Activates knob to select the synchronization point for a time code reference (1-23 hours).
Note: F2 is only active for 3:2 inputs or outputs.  F3 is only active when TIME CODE is selected...

20 PRESETS
The FIT functions are used to automatically set up different aspect ration conversions from input to output.  Some
examples follow.  If input=16x9 and output=4x3: then FIT H=letterbox, FIT V=side cut, FIT H&V=anamorphic
squeeze.  If input=4x3 and output=16x9: then FIT H=top&bottom cut, FIT V=side panel, FIT H&V=anamorphic
stretch.
RESIZE >> PRESETS
ZOOM H: 1.333333 ZOOM V: 1.000000
CURRENT PRESET: FIT H&V
FIT H FIT V FIT H&V 14:9 13:9
F1 F2 F3 F4 F5 EXIT
F1 – Scales to match input size to...