Panasonic All-in-One Headset Wx H3050 Operating Instructions

WX-H3050
All-in-One Headset
Operating Instructions 
Model No.  WX-H3050
Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future\
 use.
No model number suffix is shown in this Operating Instructions.
ENGLISH
FRANÇAIS 

2
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a\
 Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection ag\
ainst harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, an\
d can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause \...

3
WARNING:
• This apparatus must be earthed.
• Apparatus shall be connected to a main socket outlet with a pro-tective earthing connection.
• The mains plug or an appliance coupler shall remain readily operable.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be
placed on the apparatus.
• All work related to the installation of...

4
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the ma\
nufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, \
stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the...

5
Limitation of Liability  ........................................................................\
........................................................... 3
Disclaimer of Warranty  ........................................................................\
................................ ....................... 3
Important Safety Instructions ........................................................................\
......................... ..................... 4
Preface...

6
Preface
All-in-One Headset WX-H3050 is exclusively designed for Panasonic Wirele\
ss Communication System, which is used with drive-
thrumenu boards, etc. This headset is equipped with the microphone, earphone\
 as well as battery compartment and control
buttons. With the built-in antennas, transmitter, and receiver, users ca\
n communicate with other store personnel and customers.
Features
• This headset can be used with Center Module WX-C3010.
• 1.9 GHz DECT* is used with headset to prevent the...

7
ty
u
r
i
o
\b
q
w !\f!2
!4
!1
!3
!5
!6
!7
Major Operating Controls and Their Functions 

8
qHead Band and Head Pad
Adjustable to your head by sliding the head pad.
w Battery Lock [EJECT]
When removing the battery, slide out the lock.
When loading a battery, insert the battery until the lock
clicks.
\b Battery Case / Battery (Optional accessory)
Refer to p. 6 Precautions.
r Head Pad Cushion
t Switch Compartment
Do not open the cover of this compartment. It should be
opened only by qualified service personnel or system
installers.
y Power Button [POWER]
Pressing the button will turn the...

9
Notes:• Refer to operating instructions included with the battery and battery charger.
• Battery replacement is recommended when the power indicator lights up in red and a pulsing beep is heard in
the headphone.
 Installation
1. Insert the battery in the battery case as shown in the fig-
ure.
Loading
1. Prepare a fully charged battery.
2. Insert the battery as shown in the figure.
Note: Be sure to insert it until the lock clicks.
Replacement
1. Slide the battery lock to the outside.
2. Remove the...

10
Preparations
Prior to operating the headset, confirm that the system setup
for the headset, center module, and other devices has been
completed.
1. Install a battery in the battery compartment. Refer to p. 9 Battery Loading & Replacement.
2. Press the power button to turn on the headset.
3. Wear the headset. 4. Adjust the head pad so that the earphone is placed on
your ear.
5. Rotate and bend the microphone boom so that the microphone is placed near your mouth.
6. Attach a strap or the head...