Panasonic Assembly Qualifier EYFRZ01 Operating Instructions

- 1 -  

Learning New Radios:
Before a battery tools can be used with an AQ wireless, 
the  device’s  radio  information  has  to  be  learned  by  this 
unit.  To  start  the  learning  process,  select  Learn  New 
Radio from the second menu.
A  key  pad  will  appear  and  a  prompt  will  ask  the  user  to 
select their tool type. Select the number 3 button that is 
associated  with  the  tool  type  you  are  trying  to  teach  to 
the box.
The  user  will  then  be  asked  which  group...

-  - 

Choose to keep the name already programmed into this 
group  by  pressing  ENTER  or  program  a  new  name  by 
pressing EDIT.
Turn off the control panel.
• If the control panel is on, remove and then reinsert the battery pa\
ck.
Engage the switch. Check the Assembly Qualifier’s display.
A  name  can  be  given  to  the  tool  that  is  being  learned. 
The  name  can  be  up  to  eight  characters  long.  Pressing 
the  button  next  to  the  desired  character  set  will  toggle 
the...

- 3 -  

Edit Radio Information:
This edit radio function is included in the unit for trouble 
shooting purposes.
If the radio ID is known for a given tool, that tool can be 
added  to  a  group  (parameter)  in  the  AQ  wireless.  This 
function can be handy, especially with battery tools that 
have already been associated with the unit.
If  a  tool  has  never  been  learned  to  the  AQ  wireless  in 
question,  the  Edit  Radio  Information  function  will  not 
completely  learn  the  tool...

- 4 - 

Version Information:
If  the  Version  Info  button  is  pressed,  the  firmware 
version for the AQ wireless will be displayed.
Pressing any key returns the unit to the program menu.
I/O Connector:
A  screen  that  shows  the  I/O  connector  and  its  pinout 
can  be  viewed  by  pressing  the  I/O  connector  button  on 
the third menu screen.
While  the  connector  is  on  the  LCD,  pressing  any  key 
will return the unit to the programming menu. 

-  -  

I/O Schematic and Pinout:
The connector on the side of the AQ Wireless is a Hirose RM1TRD-
10S(1) or equivalent. The mating connector for this item is a Hirose 
RM1TPD-10P(1). 

- 6 - 

Group Selection:
GroupGroup 0
Input
Group 1
InputGroup Input
A0VDC0VDC0VDC
B0VDC0VDC
4VDC
C0VDC4VDC0VDC
D0VDC4VDC 4VDC
E4VDC0VDC0VDC
F4VDC0VDC 4VDC
G4VDC 4VDC0VDC
H4VDC 4VDC4VDC 

-  -  

III.	SPECIFICATIONS
ModelEYFRZ01
Rated supply voltage11/30, 0/60 Hz
Rated supply current1 A
Current consumption100 mA
Frequency410 GHz to 46 GHz
Recommended communications range10 m*
No. of connected devices
External connection output  A at 4 VDC
Operating temperature range–10ºC (14ºF) to 60ºC (140ºF)
Compatible toolsEYFLA4AR, EYFLAAR, EYFLAQR, EYFLA6JR
Dimensions39 mm (14-1/") × 30 mm (9-1/16") × 9 mm...

-  - 
Radio Information:
Indoor/Urban Range 300ft./100m
Outdoor RF line-of-sight range  1 mile/100m
Transmit Power  60mW(1dBm) conducted
  100mW(0dBm) EIRP
Receiver Sensitivity   -100dBm(1% packet error)
FCC Part 1.4  OUR-XBEEPRO
Industry Canada  414A XBEEPRO
FCC Statement: 
Contains FCC ID: OUR-XBEE/OUR-XBEEPRO
The enclosed device complies with Part 1 of the FCC Rules. Operation is subject 
to the following two conditions: (i.) this device may not cause...

- 9 -  
-MEMO-  

- 30 - 

-MEMO-