Panasonic Bb Gt1500 Quick Guide

PQQW15674ZB    DM0507SN1077
Setting up
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Base unit
HandsetCHARGE 7 HOURS
Confirm the  
charge indicator  
is on.
Model shown is BB-GT1500.
“Click”
TEL LAN
Noise filterTo single-line 
telephone jack 
(RJ11C) AC adaptor
Telephone line cordEthernet cableRouter
Cable or 
DSL modem Internet
(120 V AC, 60 Hz)
A
BC
Use only the included Panasonic AC adaptor PQLV203.
Hook
Press
plug firmly.
“Click”
“Click”
AB
ED C
Model No....

– 2 –
Setting up
Note:
LIf “Please read joip Terms of Use. Agree?” is not displayed in step 2, 
press {IP}.
LWhen the STATUS indicator on the base unit does not light in green even if you 
wait for a few minutes, see “STATUS indicator” (page 6).
Viewing the A text messages
1{MENU} i {#}{3}{6}{0}
2{V}/{^}: Select the desired item. i {OK}
3{OFF}
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
joip
Model shown is BB-GT1500.
Amber      Green
[
Please read joip
Terms...

– 3 –
Operating tips
{}: shows button names.
Using the joystick
The handset joystick can be used to navigate 
through menus and to select items shown on the 
display, by pushing it up {^}, down {V}, left {}.
Adjusting audio volume
Push the joystick up {^} or down {V} repeatedly 
while talking.
Handset soft keys
The handset features 2 soft keys and a joystick. By 
pressing a soft key, or by pressing the center of the 
joystick, you can select the feature shown directly 
above it on the display.
{SELECT},...

– 4 –
Basic operation (Handset)
Making calls1Dial the phone number.
2To make a landline call, press {TEL}.
To make a A internet call, press {IP}.
Note:
LTo call a Panasonic GLOBARANGE phone, dial the 
A number consisting of a # followed by 10 digits.
Answering callsTo answer the landline call, press {TALK}, {TEL} or 
{s}.
To answer the A internet call, press {TALK}, {IP} 
or {s}.
Adjusting the receiver/
speaker volumePush the joystick up {^} or down {V} while talking.
Viewing the caller list and 
calling...

– 5 –
BB-GT1540 Answering system (Base unit)
Auto answer on1Press {IP/TEL} repeatedly until the display 
shows the desired line(s) (n and/or m).
2Press {ANSWER ON}.
Auto answer offPress {ANSWER ON}.
Recording your greeting 
message (max. 2 minutes)1Press {IP/TEL} repeatedly until the display 
shows the desired line(s) (n and/or m).
2{GREETING REC}
3Within 10 seconds, press {GREETING REC} 
again.
4Speak clearly about 20 cm (8 inches) away from 
the MIC.
5To stop recording, press {STOP}.
Listening to new...

– 6 –
For further information, refer to the STATUS indicator section in the Operating 
Instructions.
AmberOnLThe base unit’s IP address may conflict with the IP 
addresses of other devices on your local network if 
you have set the static IP address. We recommend 
using the automatic setup (default):
1. {MENU} i {#}{5}{0}{0}
2. {V}{^}: “On” i {SAVE} i {OFF}
FlashingLThe base unit is registering with the A service. 
Please wait.
LIf the STATUS indicator continues flashing:
– If you have set the static...

– 7 –
For other questions, please refer to the Operating Instructions or visit the web sites 
below.
Frequently asked questions
QuestionCause/solution
The unit does not work.LMake sure the battery is installed correctly and 
fully charged.
LUnplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.
LThe handset has not been registered to the base 
unit. Register the handset as explained later in 
this guide.
I cannot hear a dial tone for 
the IP line.LConfirm the Ethernet...

– 8 –
Quick troubleshooting
Place the handset on the base unit, then 
check if the charge indicator is on.
L Model shown is BB-GT1500.
The charge indicator is OFF.
The charge indicator 
is ON.
Unplug the AC adaptor of the base unit and remove the 
battery from the handset, then plug in the AC adaptor and 
insert the battery into the handset again. Try re-registration 
as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same 
message, try re-registration as...

– 9 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the 
handset is not registered to the base unit, register the handset.
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Handset
Press {MENU}, then press {#}{1}{3}{0}.
Handset
Press {OK
L}.
Base unit
BB-GT1500
Press and hold {HANDSET LOCATOR} 
until the STATUS indicator flashes in red.
L Complete next step within 90 seconds.
BB-GT1540
Press and hold...

IMPORTANT!
If your product is not working 
properly. . .
For your phone’s functions or features, please contact 
Panasonic.
1Read this Quick Guide or Operating Instructions
LIf you lost the Operating Instructions, you can download 
a copy at http://www.panasonic.com/help
2Visit our website:
http://www.panasonic.com/help
LFAQs and troubleshooting hints are available.
3Contact us via the web at:
http://www.panasonic.com/contactus
4Call us at:
1-800-211-PANA (1-800-211-7262)
LMonday - Friday 9:00am - 9:00pm...