Panasonic Bb Hcm311a Owners Manual

Additional Feature table
The following features are added to the camera. Read both Operating Instructions 
manuals before starting to use the product.
Additional FeaturesContentsPag e
Adding Manual Setup on the 
Initial Setting Window
Manual Setup is added on the initial 
setting window.page 4
Digital Zoom FeatureA 10x digital zoom feature is added.page 4
Registering a Preset Position20 camera positions can be stored.page 8
Changing the Name of 
Viewnetcam.com to 
DynamicDNS, Moving the 
Position of...

Operating Instructions (Additional Features)
2
[Time] on the Camera Page[Time] of Return to Specified Position 
on the Camera page is changed.page 14
The input characters are 
changed when you set [FTP] for 
Transfer Method
[Space], [], [&], [] are also 
available as a input characters for 
Login ID and Password.page 15
The Port numbers are available 
and the input characters are 
changed when you set [E-mail] 
for Transfer Method
• The Port numbers are available 
for SMTP Server and POP3 
Server.
...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 3
Trademarks
 Hotmail is either registered trademarks or trademarks of Microsoft Corporation 
in the United States and/or other countries.
 SD mark is a trademark of the SD Card Association.
 All other trademarks identified herein are the property of their respective 
owners.
 This software is based in part on the work of the Independent JPEG Group.
Abbreviations
 Network Camera is called Camera in this...

Operating Instructions (Additional Features)
4
Adding Manual Setup on the Initial Setting Window
Manual Setup is added on the initial setting window.
Digital Zoom Feature
Camera has a 10x digital zoom feature.
There are two methods of increasing/decreasing the size of the object on the 
Single Camera screen, the Multi Camera screen, and the Buffered Image screen 
(only while playing video):
1.Clicking the right mouse button 
Clicking the right mouse button on the upper third of the Single Camera 
screen...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 5
Clicking the right mouse button
Clicking the right mouse button on the upper third zooms in, and clicking on the lower third 
zooms out. Zooming in and out is also available by moving the mouse up with pressing the 
right mouse button, or moving the mouse down with pressing the right mouse button.
Note
The performance of the mouse varies according to your OS.
Rotating the mouse wheel
On a screen, rotating the...

Operating Instructions (Additional Features)
6
Digital Zoom Feature (BB-HCM381A)
A 42x magnifying capacity (a 21x optical zoom and a 2x digital zoom) can be 
operated with a mouse.
The 10x digital zoom feature can be used on the Multi Camera screen, and the 
Buffered Image screen (only while playing video).
There are two methods of increasing/decreasing the size of the object (only while 
playing video).
1.Clicking the right mouse button 
Clicking the right mouse button on the upper third of the Single...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 7
When Zoom Control is disabled or enabled on Access Level
The zoom type is difference as follows.
When Zoom Control is disabled on Access Level
A 10x digital zoom feature that described the previous page is can be 
used.
When Zoom Control is enabled on Access Level
A 42x optical zoom feature is can be used. The magnification will not be 
displayed. 

Operating Instructions (Additional Features)
8
Registering a Preset Position
20 camera positions can be stored as presets. These positions can be changed.
 Registered buttons are shown in blue.
 Unregistered buttons are shown in white.
1.Click [Program].
 [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Zoom to the desired position. (BB-HCM 
381A only)
4.Adjust the focusing if necessary. (BB-
HCM 381A only)
5.Select a...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 9
Note
 Only an administrator can register preset positions.
 When registering preset positions, the camera also saves brightness and 
white balance settings. The value will be not saved.
 The registered preset positions can be selected in the Specified Position 
of Return to Specified Position on the Camera page.
 The registered preset positions can be selected in the Lens Position When 
Triggered setting when...

Operating Instructions (Additional Features)
10
Changing or Deleting the Settings
1.Click [Program].
 [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
 When deleting, this step is not 
necessary.
3.Zoom to the desired position.
4.Adjust the focusing if necessary.
5.Click the home position, alarm position 
or a preset number (1—20).
6.Click [Save] after setting the preset 
name or click [Delete].
 If you quit to change or...