Panasonic Blu Ray Disc Home Theater Sound System Sc Bt100 Operating Instructions

							21
RQT9129
This system features two different iPod playback modes.
The first of these is EXTENDED mode, for playback of music contents. With this mode, the menu screen on the system can be used to search for 
playlists and artist names, and to play music. The second mode is SIMPLE mode, which can be used for playback of three types of contents – 
music, photos, and videos. With this mode, simple operations such as play, stop, and search can be performed on the display of your iPod.
1Press [iPod] to select “IPOD”.
The iPod automatically switches to this unit’s display mode.
iPod Music menu appears on the TV.
≥If the menu screen is not displayed, press [SETUP].
§Playback modes during connection/when disconnected
System may be operated in same playback mode as set with 
iPod when connected. Playback may also be continued on iPod 
with same settings as made on system after disconnection.
2Press [3,4] to select an item and press [OK].
≥Play will start from the selected song if this operation is 
repeated several times.
≥Press [RETURN] to return to the previous screen.
Clear/display iPod Music menu during playback.
Press [TOP MENU].You can also play music using SIMPLE mode.
1Press [iPod] to select “IPOD”.
2Press [SETUP] to switch the iPod to its own 
display mode.
Proceed operations through display of iPod.
≥If the iPod Music menu (>left) is displayed, press [SETUP]. 
“SIMPLE” will be shown on the main unit’s display.
3Switch the TV input to video in.
4Play a slideshow or video on your iPod.
The picture will be displayed on your TV.
You can also use the remote control to operate iPod menu.
≥[3,4]: To navigate menu items
≥[OK]:  To go to the next menu
≥[RETURN]:  To return to the previous menu
You can enjoy surround sound effect when you press [ÎPLIIx] or 
[NEO:6] (>27).
Playback
Enjoy music (EXTENDED mode)
ItemsSelection/playback method
PlaylistsSearch from all playlists.
ArtistsSearch by artist name.
AlbumsSearch by album title.
SongsSearch from all songs registered on iPod.
PodcastsSearch by episode for radio programs 
downloaded from iTunes store.
AudiobooksSearch by title from audiobooks purchased from 
iTunes store or audible.com.
Playback 
Mode
§Shuffle
≥Off: Cancel 
≥Songs: Play all songs on iPod in random order.
≥Albums: Play all songs on album in random 
order.
“ ” is displayed on the unit’s display when 
“Songs” or “Albums” is selected.
Repeat
≥Off: Cancel 
≥One: Play single song repeatedly.
≥All: Play all songs from selected item (e.g., 
Playlists, Albums, etc.) repeatedly.
“ ” is displayed on the unit’s display when 
“One” or “All” is selected.
Music iPod
OK
PlaylistsArtistsAlbumsSongsPodcastsAudiobooksPlayback Mode
iPod
Ronaldo
2:43
Good morning
45 of 1230
Happy days
RETURN
Pause
SkipSkip Play
Playing condition
Playing 
positionSong
Artist
Album e.g.,
Enjoy videos/photos (SIMPLE mode)
Basic controls (For music and videos only)
ButtonsFunctions
[1](PLAY) Play
[∫] Pause
≥Press [1] (PLAY) to restart play.
≥Playback start position may not be 
stored in memory in certain cases. [;]
[:, 9] Skip
(Press and hold)
[6, 5]Search
Basic
operations
SC-BT100P-ENG.book  21 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							22
RQT9129
Playing still pictures [JPEG]
You can play still pictures recorded onto a BD-RE, DVD-RAM, CD-R/RW and SD card.
1Insert a disc or an SD card (>14).
≥If a disc or an SD card containing data in different file formats is inserted, the file 
selection menu may be displayed.
SD card:
Press [3,4] to select “Picture (JPEG) 
Navigator” and press [OK].
CD-R/RW:
Press [3,4] to select “Pictures” and press [OK].
BD-RE, DVD-RAM
“Album View” screen is displayed.
≥When the “Title View” screen is displayed, press the [B] 
button to switch to the “Album View” screen.
CD-R/RW
, SD Card
“Picture View” screen is displayed.
B Go to step 3
≥If the menu is not displayed, press [BD/SD] to select “BD/DVD/CD” or “SD”.
Main unit: Press [SELECTOR].
≥To show other pages
Press [:, 9].
2Press [3,4,2,1] to select the album and press [OK].
3Press [3,4,2,1] to select the still picture and press [OK].
≥Small-sized still pictures are displayed with a frame.
≥To display the previous or next still picture
Press [2,1].
CD-R/RW
Discs containing data in different file formats.
To switch from the MP3 menu to JPEG menu, perform steps 
below.
1Press [FUNCTIONS].
2Press [3,4] to select “Menu” and press [OK].
3Press [3,4] to select “Pictures” and press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [DIRECT NAVIGATOR].
[OK]
[3,4,2,1]
[FUNCTIONS]
[DIRECT NAVIGATOR]
[RETURN]
[SUB MENU]
[STATUS] [1](PLAY) [∫] [:, 9]
[B] [SELECTOR]
[∫] [BD/SD]
TIPSSD Card
Playback HD Movie (AVCHD)
Select an action or press [RETURN].
Picture (JPEG) Navigator
OK
RETURN SUB
MENU
e.g., SD card
Â
#
 Total 8 106_DVD
 To t a l  1 32006  9  12
SUB
MENU
DIRECT NAVIGATORAlbum ViewDVD-RAM(VR)VideoPicture
OKPress [OK] to go to Picture View  Previous Next SlideshowRETURNVideoPicturePage  02/02
e.g.,
penguin_jpg
PicturesPicture ViewCD(JPEG)
Page  01/01SUB
MENUPlayFrom SUB MENU you can select a folder.RETURN
001
005
009006 007 008 002 003 004
e.g.,
SUB
MENU
DIRECT NAVIGATORPicture ViewDVD-RAM(VR)VideoPicture
PlayRETURN
2006  9  12
Page  001/001
0001
0005
00090006 0007 0008 0002 0003 0004
e.g.,
TIPS
OKRETURN
Other Functions
Menu
Input Select
Home theaterFUNCTIONS
CD(MP3/JPEG)
NOTE
SC-BT100P-ENG.book  22 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							23
RQT9129
Useful functions during still picture play
Start Slideshow
You can display still pictures one by one at a constant interval.
BD-RE, DVD-RAM1While the “Album View” screen is displayed
Press [3,4,2,1] to select the album and press [SUB MENU].
2Press [3,4] to select “Start Slideshow” and 
press [OK].
≥You can also start slideshow by pressing 
[1] (PLAY) after selecting the album.
CD-R/RW, SD card1While the “Picture View” screen is displayed
Press [SUB MENU].
2Press [3,4] to select “Start Slideshow” and press [OK].
To stop slideshow
Press [∫].
Slideshow with music
SD card onlyIf a music CD is inserted in the disc tray while playing slideshows, 
the music CD starts playing automatically as background music.
≥You cannot search or skip on a music CD.
≥When the slideshow stops, playback of the music CD also stops.
Slideshow settings
In step 2 in “Start Slideshow” above,
1Press [3,4] to select “Slideshow settings” and press [OK].
2To change the display interval
Press [3,4] to select “Display Interval” and press [2,1] to 
select the interval (“Long”, “Normal” or “Short”).
≥When a still picture with large number of pixels is played, the 
display interval may become longer. Even if the setting is 
changed, the display interval may not become shorter.
To repeat slideshow
Press [3,4] to select “Repeat Play” and press [2,1] to select 
“On” or “Off”.
3Press [3,4,2,1] to select “Set” and press [OK].
Rotate
1While playing (except for slideshow)
Press [SUB MENU].
2Press [3,4] to select “Rotate Right” or 
“Rotate Left” and press [OK].
≥The rotation information will be stored until the 
unit is turned off or the media is removed.
Start Slideshow
Slideshow settings
To video
Display Interval
Cancel Set
Repeat PlayNormal
On
Set time delay between pictures and
continuous ( wrap around  ) play.Slideshow settings
RETURN
Zoom out
Rotate Right
Rotate Left
OKRETURNSUB
MENUS
Zoom out
This function is only available for small-sized still pictures.
1While playing (except for slideshows)
Press [SUB MENU].
2Press [3,4] to select “Zoom out” and press 
[OK].
≥To cancel “Zoom out”, press [3,4] to select 
“Zoom in” in step 2 and press [OK].
≥The zoom-out information will not be stored.
To select the still pictures in another folder
BD-RE, DVD-RAMTo switch to another higher folder
(Only if there is a multiple number of higher folders recognizable)
1While the “Album View” screen is displayed
Press [SUB MENU].
2Press [3,4] to select “Select Root folder” and press [OK].
3Press [2,1] to select the higher folder and press [OK].
CD-R/RW1While the “Picture View” screen is displayed
Press [SUB MENU]. 
2Press [3,4] to select “Select Folder” and press [OK].
3Press [3,4] to select a folder and press [OK].
The “Picture View” screen for the folder appears.
To show the picture properties
While playing
Press [STATUS] twice.
To exit, press [STATUS].
Zoom out
Rotate Right
Rotate Left
OKRETURNSUB
MENUS
\DCIM
OK
Select Root folder
Changes the Album folder to be accessed.
Press [OK] to confirm
Pictures Folder selection 
CD(JPEG) 
    001  
        002  
        003  
        004  
        005  
        006  
        007  
        
008         009  
        010  
       
    103  
        104  
        105 
021216_0026 
    F  7/25 
OK 
RETURN 
 Folder - picture No.      102 - 0001
Photo     11/12/2007                    Total        3/9
Shooting date e.g., JPEG on DVD-RAM
Advanced 
operations
SC-BT100P-ENG.book  23 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							24
RQT9129
Different kinds of playback for BD-Video [BD-V]
Some discs permit a variety of interactive functions in addition to the ordinary playback operation.
Showing Pop-up menu
The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method, refer to 
the instructions for the disc.
1Press [POP-UP MENU].
2Press [3,4,2,1] to select the 
item and press [OK].≥Pop-up menu also appears by pressing 
[SUB MENU] and selecting “Pop-up Menu”.
To exit the screen
≥Press [POP-UP MENU].e.g.,
TIPS
≥The Final Standard Profile [“Picture-in-picture”, “Virtual Package” (> below), etc.] is a new playback function of BD-Video. Contents of 
playback and the operating method may vary with the disc. For details, refer to the instructions for the disc.
Playing secondary video (picture-in-picture) and secondary audio
Secondary video can be played from a disc compatible with the picture-in-picture 
function. 
For the playback method, refer to the instructions for the disc.
To turn on/off secondary video
Press [PIP].
Secondary video is played.
≥“PiP ON” is displayed.
≥Press the button to turn it ON and OFF.
To turn on/off audio with the secondary video
Press [SECONDARY AUDIO].
The secondary audio is played.
≥“Secondary Audio ON” is displayed.
≥Press the button to turn it ON and OFF. 
≥Only the primary video is played during search/
slow-motion or frame-by-frame.
Secondary video
Primary videoNOTE
Virtual package
For a disc compatible with the virtual package (>43), data is copied to other media 
(>43, Local storage) from the disc to use the different functions while playing the 
data.
For this unit, data is copied to an SD card.
The methods for copy and playback and the required available capacity on the card 
may vary with the disc. For details, refer to the instructions for the disc.
To use the above functions, it is recommended that you format the card on this unit.
Format the card using the following procedures. BD-Video data, such as secondary 
video recorded on the card, can also be erased with the following procedures.
Formatting SD cards/Deleting data
1Insert an SD card (>14).
2Press [FUNCTIONS].
3Press [3,4] to select “Other Functions” and press [OK].
4Press [3,4] to select “Card Management” and press 
[OK].
5Press [3,4] to select “BD-Video 
Data Erase” or “Format SD Card” 
and press [OK].
6Press [2,1] to select “Yes” and 
press [OK].
7Press [2,1] to select “Start” and 
press [OK].
≥If the SD card is removed from this unit when 
using data that was copied with the virtual 
package function, disc playback stops. 
≥Images and audio may freeze momentarily 
during playback.
≥Data cannot be copied in the following cases.
– The card is protected.
–Available capacity on the card is too small.
Delete unnecessary data or use a new card.
≥When the function fails to work properly, even if 
the data is copied, format the card again with this 
unit. (In this case, all data will be erased.)
≥If an SD card with files in different formats is 
used, images and audio may not play back 
properly. It is recommended that you use an SD 
card with no data or an SD card formatted on this 
unit.
≥It is impossible to restore data after formatting 
the card or erasing the data.
Once a card is formatted, all data including those 
recorded on the PC is erased as well, even if the 
data were protected with other equipment.
Confirm whether the card can be formatted. 
Card Management  No. of Files    6 
Free space    300 MB 
SD card 
Format this SD Card. OK 
RETURN 
BD-Video Data Erase Format SD Card 
NOTE
TIPS
NOTE
SC-BT100P-ENG.book  24 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							25
RQT9129
Showing FUNCTIONS menu
Some functions of this unit can be operated from the FUNCTIONS menu.
1Press [FUNCTIONS].
≥Items displayed vary according to the chosen selector and media.
2Press [3,4] to select the item and press [OK].
ItemsFunctions
Playback DISC
PlaybackStarts playing disc/SD Card.
Top MenuShows a disc top menu.
MenuShows a disc menu.
To play AVCHD (>14)
To  p l a y  M P 3  (>19)
To play JPEG (>22)
MusicSelect to play Music on iPod
>21, Step 2 in “Enjoy music (EXTENDED mode)”
Videos/PhotosSelect to play Videos/Photos on iPod
>21, Step 3 in “Enjoy videos/photos (SIMPLE mode)”
Input Select
Select the source.
BD/DVD/CD:
To play BD-Video, DVD-Video, AVCHD (>14)
To play CD, MP3 (>19)
SD card:
To play AVCHD (>14)
To play JPEG (>22)
FM:
To enjoy the FM radio (>18)
AM:
To enjoy the AM radio (>18)
iPod:
To play iPod
Press [3,4] to select “Music” or “Videos/Photos” and press [OK].
≥Music:>21, Step 2 in “Enjoy music (EXTENDED 
mode)”
≥Videos/Photos:>21, Step 3 in “Enjoy videos/photos (SIMPLE 
mode)”
Digital in 
§:
To enjoy TV broadcasts with this unit’s speakers (>17)
AUX  (T V)
§:
To enjoy TV broadcasts with this unit’s speakers (>17)
§“(TV)” is displayed next to items set for TV SOUND input. (>28, 
Setting the TV audio for VIERA Link “HDAVI Control”)
Other Functions Setup:
You can change the unit’s settings using Setup menu (>32).
Card Management:
Formatting SD cards/Deleting data (>24)
Playlists: 
You can play playlists created on DVD-VR.
Press [3,4,2,1] to select the playlist and press [OK].
[OK]
[3,4,2,1]
[FUNCTIONS]
OKRETURN
Other Functions
Playback DISCTo p  M e n uMenuInput Select
Home theaterFUNCTIONS
DVD-Video
e.g., [DVD-V]
OKRETURN
AUX (TV)Digital iniPodAM
BD/DVD/CDSD cardFM
Home theaterFUNCTIONSInput Select
DVD-Video
e.g., [DVD-V]
Advanced 
operations
SC-BT100P-ENG.book  25 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							26
RQT9129
Changing audio quality/sound field
≥The following sound effects may not be available or have no effect with some sources, or when headphones are used (>14).
≥You may experience a reduction in sound quality when these sound effects are used with some sources. If this occurs, turn the sound effects off.
Main unit only
You can enhance the subwoofer effect with strong bass.
Press [SW BOOST] on the main unit.
≥The SW BOOST indicator lights when Subwoofer Boost is turned on.
1Press [SOUND].
2Press [3,4] and select item for setting.
EQ """"""") H.BASS """""""") REAL CF
fv
W.  S.  ("""""" SRD ENH(""""""" SW. LEVEL
3Press [OK].
You can select sound quality settings.
4Press [3,4] to select the item.
Each time you press the button:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
You can enhance low-frequency sound so that heavy bass sound can 
be heard clearly.
4Press [3,4] to select “ON” or “OFF”.
You can make the sound of the center speaker seem like it is coming 
from within the TV.
4Press [3,4] to select “ON” or “OFF”.
≥This function is effective when playing audio containing center 
channel sound or when Dolby Pro Logic IIx/Dolby Pro Logic II or 
DTS NEO:6 is on.
You can adjust the amount of bass. The unit automatically selects the 
most suitable setting according to the type of playback source.
4Press [3,4] to select the item.
SUB W 1: Weakest effect
SUB W 2: Middle effect
SUB W 3: Strongest effectThis function automatically makes speaker adjustment to enhance the 
surround sound effect.
4Press [3,4] to select “ON” or “OFF”.
≥This function is effective when playing audio containing surround 
channel sound or when Dolby Pro Logic IIx/Dolby Pro Logic II or 
DTS NEO:6 is on.
≥This sound effect have no effect when receiving AM radio broadcast.
You can enhance the surround effect for low volume 5.1-channel 
sound. (Convenient for late night viewing.)
4Press [3,4] to select “ON” or “OFF”.
≥This function is effective when playing audio containing surround 
channel sound or when Dolby Pro Logic IIx/Dolby Pro Logic II or 
DTS NEO:6 is on.
≥This sound effect have no effect when receiving AM radio broadcast.
1Press [CH SELECT] to select the speaker.
Each time you press the button:
LR—) C_) RS_) RB_) LB_) LS_) SW
^"""""""""""""""""""""""""""""b
L R: Front speaker (left and right)
C: Center speaker
RS: Surround speaker (right)
RB: Surround back speaker (right)
LB: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥Speakers with settings (>34) set to “ ” will not be displayed.
≥The channels not included in the playing audio will not be 
displayed (Subwoofer is displayed even if not included).
(When “L R” selected)
2Press [2,1] to adjust the balance of the front 
speakers.
(When other option selected)
2Press [3] (increase) or [4] (decrease) to adjust 
the speaker level for each speaker.
C, SW:r6 dB to s6 dB
RS, RB, LB, LS:r10 dB to s10 dB
Using Subwoofer boost
Setting the sound effects
Equalizer (EQ)
Enhancing the bass sound (H.BASS)
Real Center Focus (REAL CF)
Adjusting the subwoofer level (SW. LEVEL)
Surround Enhancer (SRD ENH)
Using Whisper-mode Surround (W. S.)
Adjusting speaker level during play
Adjusting the balance of the front speakers
Adjusting the speaker level
W4SW2S96/24D+
NEO:6PLxHD
Standard balance e.g.,
Front right: s11 to s12 dB
e.g., Subwoofer
SC-BT100P-ENG.book  26 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							27
RQT9129
Enjoying surround sound
Enjoying surround sound
≥The following sound effects may not be available or have no effect with some sources, or when headphones are used (>14).
≥You may experience a reduction in sound quality when these sound effects are used with some sources. If this occurs, turn the sound effects off.
Dolby Pro Logic IIx/Dolby Pro Logic II
When 5.1ch speakers connected
Dolby Pro Logic II will be used.
The technology enables you to play 2-channel stereo sources on 5.1-channel.
When 7.1ch speakers connected (>4, Enjoying 7.1-channel surround sound)
Dolby Pro Logic IIx will be used.
The technology enables you to play 2-channel stereo or 5.1-channel sources on 
7.1-channels (sounds assigned to surround back channels become stereo in playback).
The technology also makes surround back channels available for the playback of Dolby 
Digital Surround EX sources (sounds assigned to surround back channels become 
monaural in playback).
Press [ÎPLIIx].
Each time you press the button:
MOVIE: This mode produces good effects when you play commercial film titles in 
the Dolby Surround format.
MUSIC: This mode produces good effects when you play music.
EX: This mode produces good effects when you play commercial film titles 
recorded in the Dolby Digital Surround EX format.
OFF: Cancel (no effect is added)
≥“EX” may only be selected when speaker setting (>33, Speaker, 34, Speaker settings) 
is set to 7.1-channel.
≥You cannot select “EX” when playing 2-channel stereo sources.
≥You cannot use this function when playing titles recorded in the DTS-ES format.
DTS NEO:6
When 5.1ch speakers connected
The technology enables you to play 2-channel stereo sources on 5.1-channel.
When 7.1ch speakers connected (>4, Enjoying 7.1-channel surround sound)
The technology enables you to play 2-channel stereo or 5.1-channel sources on 
6.1-channels.
Press [NEO:6].
Each time you press the button:
CINEMA: This mode produces good effects when playing movies.
MUSIC: This mode produces good effects when playing music.
OFF: Cancel (no effect is added)
≥The “CINEMA” mode is available for 2-channel stereo Dolby Digital and DTS sources 
containing surround data. The “MUSIC” mode is available for the same sources 
containing no surround data.
≥You cannot use this function when playing titles recorded in the DTS-ES format.
7.1ch Virtual Surround
You can enjoy 7.1-channel surround-like effect using 5.1-channel speakers.
This function is effective only when playing 6ch sources or above and speaker setting 
(>33, Speaker, 34, Speaker settings) is set to 5.1-channel.
Press [7.1CH VS].
Each time you press the button:
7.1CH VS SIDE-SP: Effective when surround speakers are placed either side of the 
seat position.
7.1CH VS REAR-SP: Effective when surround speakers are placed behind the seat 
position.
7.1CH VS OFF: Cancel (no effect is added)
≥You cannot use this function when playing titles recorded in the Dolby Digital Surround 
EX format.
≥These functions only work during playback through system speakers.
[ÎPLIIx]
[NEO:6]
[7.1CH VS]
Advanced 
operations
SC-BT100P-ENG.book  27 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							28
RQT9129
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”)
You can turn on this unit and TV, and start playing with a single press 
of a button.
Press [ONE TOUCH PLAY].
This unit’s speakers will be automatically activated (>right, Speaker 
control).
≥This function also works if you press [1] (PLAY) on this unit’s 
remote control when this unit is in standby mode.
≥Playback may not be immediately displayed on the TV. If you miss 
the beginning portion of playback, press [:] or [6] to go back to 
where playback started.
≥When you switch the TV input to TV tuner mode, this unit will 
automatically switch to “AUX”
§ or “D-IN”§.
[This function does not work when the iPod selector (SIMPLE mode) 
is chosen. (>21)]
≥When you start disc play, the TV will automatically switch its input 
mode for this unit.
Delay between audio and video is automatically adjusted, enabling 
you to enjoy smooth audio for the picture (>33, Time Delay).
≥This function works only when “BD/DVD”, “SD”, “AUX”
§ or “D-IN”§ is 
selected as the source on this unit.You can select whether audio is output from the unit’s speakers or the 
TV speakers by using the TV menu settings. For details, refer to the 
operating instructions of your TV.
Home theater
This unit’s speakers are active.
≥When this unit is in standby mode, changing the TV speakers to this 
unit’s speakers in the TV menu will automatically turn the unit on and 
select “AUX”
§ or “D-IN”§ as the source.
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or mute button 
on the TV’s remote control. (The volume level is displayed on the 
main unit’s FL display.)
≥To cancel muting, you can also use the home theater remote control 
(>16, Muting the sound).
≥If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to “0”.
– This function works only when “BD/DVD/CD”, “SD”, “AUX”
§ or 
“D-IN”§ is selected as the source on the home theater system.
≥Audio output is 2-channel audio.
When the TV is turned off, this unit goes into standby mode 
automatically.
≥This function works only when “BD/DVD/CD”, “SD”, “IPOD”, “AUX”
§ 
or “D-IN”§ is selected as the source on this unit.
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function that offers linked 
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI 
Control”. You can use this function by connecting the equipment with an 
HDMI cable. See the operating instructions for connected equipment for 
operational details.
Preparation1Confirm that the HDMI connection has been made (>7).
2Set “VIERA Link” to “On” (>33).
3To complete and activate the connection correctly, turn on all VIERA Link 
“HDAVI Control” compatible equipment and set the TV to the corresponding 
HDMI input mode for this unit.
Setting the TV audio for VIERA Link “HDAVI Control”Select between “AUX” and “D-IN” to work with the linked operations. Confirm 
the audio connection to the AUX terminal (for “AUX”) or OPTICAL IN terminal 
(for “D-IN”) (>7).
1Press [N, O SELECT] to select “AUX” or “D-IN”.
2Press [SETUP].
3(When “D-IN” is selected)
Press [3,4] to select “TV SOUND”.
4Press [OK].
5Press [3,4] to switch 
“AU X” o r “ D -IN” and press [OK].
Whenever the connection or settings are changed, reconfirm the points above.
≥VIERA Link “HDAVI Control”, based on the control 
functions provided by HDMI which is an industry 
standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we 
have developed and added. As such, its operation 
with other manufacturers’ equipment that supports 
HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as 
of December, 2007) for Panasonic’s HDAVI Control 
compatible equipment. This standard is compatible 
with Panasonic’s conventional HDAVI equipment.
≥Please refer to individual manuals for other 
manufacturers’ equipment supporting VIERA Link 
function.
≥It is recommended that you use Panasonic’s 
HDMI cable.
Recommended part number: 
RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/
4.9 ft.),RP-CDHG20 (2.0 m/6.6 ft.), RP-CDHG30 
(3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.
≥Non-HDMI-compliant cables cannot be utilized.
What you can do with “HDAVI Control”
NOTE
One touch play
Automatic input switching
Automatic lip-sync function (for HDAVI Control 3)
Speaker control
Power off link
§“AUX” or “D-IN” works depending on the “TV SOUND” setting (>above, Setting the TV audio for VIERA Link “HDAVI Control”).
SC-BT100P-ENG.book  28 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							29
RQT9129
If you connect this unit to a TV that has “HDAVI Control 2” or “HDAVI Control 3” function with an HDMI cable, you can operate this unit using the 
following buttons on the TV remote control.
[3,4,2,1], [OK], [RETURN], [SUB MENU] and colored buttons
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
≥Refer to the TV operating instructions for operating TV.
By using the TV remote control, you can play media using the 
FUNCTIONS menu.
1Press the button for VIERA Link 
on the TV remote control.
2Select the home theater.
≥The FUNCTIONS menu is displayed
3Select the desired items on the 
FUNCTIONS menu (>25).
By using the TV remote control, you can play discs using the “Control 
Panel” and display the Top Menu (for BD-Video and DVD-Video) or 
Pop-up Menu (for BD-Video).
≥This works only during “BD/DVD” or “SD” playback and resume 
modes.
1Press [SUB MENU].
≥You cannot use the sub menu while the 
Top Menu for BD-Video or DVD-Video is 
displayed.
2Select an item, then press [OK].
∫Using the Control Panel
You can operate the playback with the indicated controls.
[Note]
≥Depending on the menu, some button operations cannot be 
performed from the TV’s remote control.
≥You cannot input numbers with the numbered buttons on the TV’s 
remote control ([0] to [9]). Use this unit’s remote control to select the 
playlist etc.
∫When you want to leave the TV on and set only this unit to standby modePress [Í] on this unit’s remote control and set to standby mode.
∫When not using “HDAVI Control”Set “VIERA Link” in the Setup menu to “Off”. (>33)
Easy control only with VIERA remote control
Using the FUNCTIONS menu to operate this unit
e.g.,
OKRETURN
Other Functions
Playback DISCTo p  M e n uMenuInput Select
Home theaterFUNCTIONS
DVD-Video
Using the sub menu to operate this unit
Control PanelControl Panel is displayed. 
Follow the indications on the 
screen (>below).
Screen Aspect(>16)
Top Menu [BD-V] [AVCHD] [DVD-V]Top menu is displayed.
Menu [DVD-V]Menu is displayed.
Pop-up Menu [BD-V] [AVCHD]Pop-up menu is displayed.
Rotate Right [JPEG]Rotate the still picture.
Rotate Left [JPEG]
Zoom in [JPEG]Enlarge or shrink the still 
picture.
Zoom out [JPEG]
OK
RETURN SUB
MENU
Control Panel 
Screen Aspect 
Top Menu 
Pop-up Menu 
e.g.,
SearchRETURN SearchPlay Pause
Stop
e.g.,
Advanced 
operations
SC-BT100P-ENG.book  29 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							30
RQT9129
Changing settings with the on-screen menu
On-screen menu operations
1Press [BD/SD] to select “BD/DVD/CD” or “SD”.
2Press [DISPLAY].
3Press [3,4] to select 
the menu and press [1].
4Press [3,4] to select 
the item and press [1].
5Press [3,4] to select 
the setting.≥Depending on the condition of the 
unit (playing, stopped, etc.) and 
disc contents, there may be some 
items that you cannot select or 
change.
≥Some items can be changed by 
pressing [OK].
To exit the on-screen menu
Press [DISPLAY].
Video Play Signal Type 
Subtitle 
Subtitle Style 
Off Main
- Angle - 
1ENG 
Disc 
Menus Items Settings e.g., BD-Video
NOTE
TIPS
What you can change with the on-screen menu
MenusItemsSettings and details
DiscSignal Type[BD-V]
≥Primary Video
Video: The video recording method appears. (Dbelow, Video recording method)
Soundtrack: Select the type of audio or language. (Dbelow, Language, Audio attribute)
≥Secondary Video
Video: Select on/off of images.
The video recording method appears. (Dbelow, Video recording method)
Soundtrack: Select on/off of audio and the language. (Dbelow, Language, Audio attribute)
Video[AVCHD]
The video recording method appears. (Dbelow, Video recording method)
Soundtrack[AVCHD] [DVD-V]
Select the type of audio or language. (Dbelow, Language, Audio attribute)
[DVD-VR]
The disc’s audio attributes appear. (Dbelow, Audio attribute)
Subtitle[BD-V] [AVCHD] [DVD-V]
Turn the subtitle on/off and select the language. (Dbelow, Language)
[DVD-VR] (Only discs that contain subtitle on/off information)
Turn the subtitle on/off.
Subtitle Style[BD-V]
Select the subtitle style.
Audio channel[DVD-VR]
(>16, Changing audio during play)
Angle[BD-V] [DVD-V]
Select the number of the angle.
Some items may be changed only on the disc specific menu. (>14, 24)
LanguageAudio attribute
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: NorwegianDAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: VietnameseTHA: Thai
POL: Polish
CES: Czech
SLK: Slovak
HUN: Hungarian
FIN: Finnish
¢: OthersLPCM/Î Digital/Î Digital+/
Î TrueHD/DTS/DTS-HDSignal type
ch (channel) Number of channels
k (kHz) Sampling frequency
b (bit) Number of bits
Video recording method
MPEG-2This is a standard for compressing and decompressing color motion pictures efficiently. This compression method is 
used for DVDs, etc.
MPEG-4 AVC
These are standards for compressing and decompressing color motion pictures more efficiently than MPEG-2 and used 
for Blu-ray Discs, etc.
VC-1
SC-BT100P-ENG.book  30 ページ  ２００８年２月２０日　水曜日　午後６時２２分