Panasonic Bluray Disc Home Theater Sound System Sc Bt730 Quick Guide

							VQC7400F1209RE0
121234
1
2





3

1FRONT
Lch
à
 
 







SETUP MIC
Easy Setting GuideThe order of setting
Prepare the speakers Place the speakers
Refer to the rear label of the speaker before connecting the 
corresponding cable.
Verify the type of speaker with the label on the rear of the 
speaker.
Speakers

Front speakers Front/Avant
Center speaker Center/Centre
Surround speakers SURROUND/AMBIOPHONIE
Blu-ray Disc Home Theater Sound System
Model No.
 SC-BT730
e.g.,
Prepare the 
speakersSee below
Place the 
speakersSee below
Connect the 
cablesSee over
Turn on the systemSee over
Smart setupSee Smart setup screen
Label each speaker cable by 
attaching the numbered sticker 
at the position indicated in the 
illustration. Be sure to match the 
number on each sticker with the 
circled number in the illustration.Connect the speaker cables
.
Insert the wire fully, taking care 
not to insert beyond the wire 
insulation.
: White
: Blue linee.g., Front speaker Lch
PUSH!
Front 
speakersSurround 
speakers Center 
speaker
Subwoofer
Step 3
Step 4 Step 1 Step 2
WHITE
White
Blue line
Back of the base
Pull the cable straight 
along the line and slide 
into the groove.
Tighten securely.Leave about 80 mm (3 
5/32)
Tighten securely. Press into the groove. Front speaker
Stand
Base
speaker
LchWHITE
RchRED
RchGRAY GREEN PURPLEInsert the wire fully, taking 
care not to insert beyond 
the wire insulation.
: White
: Blue line
LchBLUEPUSH!
Auto speaker setup microphone (included)Place the Auto speaker setup microphone at the actual seating 
position. (At ear level when seated.)Main unit’s front panel
GREEN
C
GRAY
RS RED
R WHITE
L
PURPLE
SW
BLUE
LS
Wireless system
Surround speakers
(LS, RS)
Recommended
Front speakers
(L, R)
60
120
72$@FOHJOEE


72$@FOHJOEE









 
						

							3
4 312 4
AC IN 
AC INVIDEO INAUDIO OUT
L
RAV IN
OPTICAL
OUT
LAN
OPT
VIDEO
OUT
AUX
L
R
(
ARC)
AV
OUT
52
1
3Ω
6Ω
6Ω
FRONT CENTER SUBWOOFERR
L
6


DIGITAL TRANSMITTER
OPTICAL
2
1DIGITAL AUDIO IN
FM ANT
  (
75
Ω)
SPEAKERS
ENCEINTESLS / RB LB / RS
SURR
  
DIGITAL TRANSMITTERVOL
1
2
3
4
5
6
7
8
9ABC
DEF
JKL
MNO
TUV GHI
QRSP
XYZ W
@.
VOL
TVINPUT
WIRELESS LINK
POWER
R6/LR6, AA
 
56ΩENTER
LAN
(
10BASE-T/ 100BASE-TX)
OKRETURN
Smart setup
Would you like to start smart setup?
Voulez-vous amorcer le Réglage intelligent ?
¿Quiere empezar la Smart Setup?
No/Non/No
Yes/Oui/Sí
Connect the cables by color or by the numbers indicated in the illustration to 
the appropriate terminals on the rear panel of the unit.
Main unit Wireless system
Wireless 
system
Main unit’s speaker 
terminals (rear panel)
PURPLE GREEN RED WHITE GRAY BLUE
Connect the cables
For detailed information, refer to the operating instructions.
FM indoor antenna 
(included)Adhesive tape
TV
Turn on the systemConnect the AC power supply 
cord
Connect the AC power 
supply cord to the main 
unit before connecting 
to the household AC 
outlet. AC power supply cord 
(included)
To a household AC outlet (AC 120 V, 60 Hz)
Turn on the TV
Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this 
unit.
Broadband Network Connections 
(Optional)By connecting this unit to the network, you can use the BD-Live 
and VIERA CAST features.
Main unit
Modem (Broadband)
•Provided by ISP
Press [, ] to select [Yes/Oui/Sí].
*
2  If you want to restart the Smart setup: 
Refer to “STEP 6: Smart setup / Easy setup” in the 
operating instructions.Broadband router, etc.
Other connection
Digital 
transmitter
Press [
] to turn on 
the main unit.
Installing batteries in the 
remote controlPress and ensure the WIRELESS 
LINK indicator lights up green.
The Smart setup starts
The on screen display will guide you through the steps.*
2
Turn on the system
Surround selector
The surround selector 
switch must be set in the 
center position.
Wireless system
Audio connectionFor best quality audio, use the HDMI cable (with 
an ARC compatible TV) or an optical digital 
audio cable.
If your TV does not support the above, use the 
audio cable. *
1  Make sure that this 
video connection 
is made to view 
photos/videos from 
the iPod/iPhone. Video cable*
1 (included)
HDMI cable (not included)(Recommended for 
highest quality picture)
Optical digital audio cable (not included) Audio cable (not included)Shielded  LAN cable 
(not included)
72$@FOHJOEE


72$@FOHJOEE