Panasonic Bluray Disc Home Theater Sound System Sc Btt196 Owners Manual

Advanced 
operations 
31VQT3X51
∫ Signal Format
∫3D Picture Mode
∫Manual Settings 
∫Pop-Out Level 
(Only when “Full HD” is selected in “3D Type” (>33).)3D position for the Option menu or message 
screen etc. can be adjusted during 3D playback.
Setup menu
Change the unit’s settings if necessary. The 
settings remain intact even if you switch the unit 
to standby.
Some items in the Setup menu are common to 
the Option menu. You can get the same effect 
with both menus.
About Multi User Mode
: Settings of...

32VQT3X51
¾HDMI Resolution
The items supported by the connected devices are 
indicated on the screen as “¢”. When any item 
without “¢” is selected, the images may be distorted.
≥ If “Auto” is selected, the best suited output 
resolution to the connected television is 
automatically selected.
≥ To enjoy high-definition video up-converted to 
1080p, you need to connect the unit directly 
to 1080p compatible HDTV (High Definition 
Television). If this unit is connected to an 
HDTV through other equipment,...

Advanced 
operations 
33VQT3X51
¾ HDMI Audio Output
This setting selects whether or not to output 
audio from HDMI.
≥ Audio will be output through the systems 
speakers when “Off” is selected.
∫ Digital Audio Input
Press [OK] to show the following settings:
¾ PCM-FIX
Selects the audio output from the devices 
connected to this unit.
≥ “On”: PCM is available.
≥“Off”: DTS, PCM and Dolby Digital are available.Select “On” if the sound is cut off intermittently.
∫ TV Audio Input
Select the TV audio input to...

34VQT3X51
∫Menu Language
Choose the language for the disc menus.
≥ Enter a code ( >46) when you select “Other 
¢¢¢¢ ”.
∫Subtitle Text
Select a suitable item according to the language 
used for MKV subtitles text.
≥This item is displayed only after playing back a file.
∫ On-screen Language
Choose the language for menus and on-screen 
messages.
∫ Easy Network Setting ( >15)
∫Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾ LAN Connection Mode...

Advanced 
operations 
35VQT3X51
Registration Type
Remote Device List
Registering/deregistering of the displayed 
equipment can be performed when “Manual” 
in “Registration Type” is selected.
¾ BD-Live Internet Access ( >21)
You can restrict Internet access when BD-Live 
functions are used.
≥ If “Allow (Limited)” is selected, Internet 
access is permitted only for BD-Live contents 
which have content ow ner certificates.
The following items use the same password.
Don’t forget your password.
∫DVD-Video...

36VQT3X51
∫Unit Settings
Press [OK] to show the following settings:
¾ Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is set to bright 
and only dimmed during playback.
¾Edit User Information
Change the user information registered in the 
Home menu.
∫ Quick Start
Speed of startup from power off is increased.
≥ When set to “On”, the internal control unit will be 
powered and the idle power consumption will 
increase compared to when set to “Off”....

Advanced 
operations 
37VQT3X51
∫ Delay time
For optimum listening with 5.1-channel sound, all 
the speakers, except for the subwoofer, should be 
the same distance from the seating position.
If either distance 1  or 2  is less than  3, 
measure the distance and adjust the time to make 
up for the difference (see the table below).
1  2  3 : Primary listening distance
A Actual speaker position
B Ideal speaker position
1 Press [ 3,4 ,2, 1] to select the distance 
box ( ) and press [OK].
2 Press [ 3,4 ] to...

38VQT3X51
Speaker installation 
option
Consult a qualified building contractor when 
attaching the speakers to a wall. Improper 
attachment may result in damage to the wall and 
speakers and personal injury.
You can attach all of the speakers (except 
subwoofer) to a wall.
≥The wall or pillar on which the speakers are to 
be attached should be capable of supporting 
10 k g (22 lbs) per screw.
1Drive a screw (not supplied) into the wall.
AAt least 30 mm (1 3/16q)
B‰ 4.0 mm (5/32q)
C ‰ 7.0 mm to ‰ 9.4 mm...

Advanced 
operations 
39VQT3X51
[BTT196] [BTT195]
It is possible to shorten the height of the front 
speaker by directly connec ting the speaker to the 
base without using the stand.
Preparation
Detach the speaker cable from the stand.
1Thread the detached cable through the 
base.
2Attach the speaker to the base and tighten 
the screw (supplied) securely.
3Connect the speaker cable to the speaker 
and to the terminal of the main unit. 
(> 11, 12)
∫ Reattaching the speaker cable 
to the stand
[BTT196]...

40VQT3X51
ReferenceTroubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with this unit:– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫Unit doesn’t respond to remote 
control or front panel buttons.
Press and hold [Í/I] on the main unit for 3 seconds.– If still unable to power the unit off, disconnect the power 
cord, wait 1 minute, then reconnect the power cord.
∫...