Panasonic Bluray Disc Home Theater Sound System Sc Btt273 Quick Guide

							VQC8346F0111MH0
1212 34



 
1FRONT
Lch
à







Easy Setting GuideThe order of setting
Prepare the speakersPlace the speakers
Refer to the rear label of the speaker before connecting the 
corresponding cable.
Verify the type of speaker with the label on the rear of the 
speaker.
Speakers

Front speakers FRONT/AVANT
Center speaker CENTER/CENTRE
Surround speakers SURROUND/AMBIOPHONIE
Blu-ray Disc
TM Home Theater Sound System
Model No.
 SC-BTT273
e.g.,
Prepare the 
speakersSee below
Place the speakersSee below
Connect the 
cablesSee over
Turn on the 
main unitSee over
Easy setupSee Easy setup screen
GREEN
GRAY C
RS RED
R WHITE
PURPLE
BLUE
LSSW LRecommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable by 
attaching the numbered sticker 
at the position indicated in the 
illustration. Be sure to match the 
number on each sticker with the 
circled number in the illustration.Connect the speaker cables
.
Insert the wire fully, taking care 
not to insert beyond the wire 
insulation.
: White
: Blue linee.g., Front speaker Lch
PUSH!
Front 
speakersSurround 
speakers Center 
speaker
Subwoofer
STEP 3
STEP 4 STEP 1 STEP 2
WHITE
White
Blue line
Leave about 
110 mm (4 
11/32) Thread the speaker cable through the base.
•Use cables with a white connector and red 
 connector.Front speaker
Base
speaker
LchWHITE
RchRED
RchGRAY GREEN PURPLEPress into the groove.
Tighten securely.Back of the base Insert the wire fully, taking 
care not to insert beyond 
the wire insulation.
LchBLUE
PUSH!
: White
: Blue line
Pull the cable straight 
along the line and slide into 
the groove.
72$@FOHJOEE


72$@FOHJOEE









 
						

							It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
3
4 312 4
VIDEO INAUDIO OUT
L
RHDMI
(ARC)HDMI
OPTICAL
OUT
SUBWOOFER
36
5
2
1
4
3
33
RLR L
Ω Ω Ω Ω3
CENTER
SURROUND
FRONT
Ω75
AUX
FM ANT

R6/LR6, AA
 
LAN
OKRETURN
Easy setup
Would you like to start easy setup?
Voulez-vous amorcer le Réglage facile ?
¿Quiere empezar la Fácil Setup?
No/Non/No
Yes/Oui/Sí
Connect the cables by color or by the numbers indicated in the illustration to 
the appropriate terminals on the rear panel of the unit.
Main unit
Main unit
PURPLE GREEN RED WHITE GRAY BLUE
Connect the cables
For detailed information, refer to the Owner’s Manual.
FM indoor antenna 
(supplied)Adhesive tape
TV
Turn on the main unitConnect the AC power supply 
cord
Connect the AC power supply cord 
to the main unit before connecting to 
the household AC outlet.
AC power supply cord 
(supplied)
To a household AC outlet
Turn on the TV
Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this 
unit.
Broadband Network ConnectionsBy connecting this unit to the network, you can optimise the internet 
features of this unit.
•Use category 5 or above straight LAN cables (STP) when connecting 
  to peripheral devices.
•When using the wireless LAN function, the LAN cable that connected 
  to the main unit is not necessary.
Main unit
LAN cable 
(not supplied)
Internet
Press [, ] to select [Yes/Oui/Sí] and press [OK]. Broadband router, etc.Other connection
Press [
] to 
turn on the 
main unit.
Installing batteries in 
the remote control
The Easy setup starts
The on screen display will guide you through the steps.
Turn on the main unit
Video cable*
1 (not supplied) HDMI cable (supplied)
(Recommended for highest quality picture)
Optical digital audio cable (not supplied)
Audio cable (not supplied)
Audio connectionFor best quality audio, 
use the HDMI cable (with 
an ARC compatible TV) 
or an optical digital audio 
cable.
If your TV does not 
support the above, use 
the audio cable.
*
1 Make sure that this video connection is made to 
view photos/videos from the iPod/iPhone.
If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and pictures 
with a single HDMI cable.If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable” or “Optical 
digital audio cable” is required to listen to sound from the TV.
If you have any questions contact : 1-800-211-PANA (7262)
Mon-Fri  9 am–9 pm (EST) Lunes-Viernes
Sat-Sun  10 am–7 pm (EST) Sabado-Domingo
72$@FOHJOEE


72$@FOHJOEE