Panasonic Cd Stereo System Sc-max650 Owners Manual

RQT9840-P
Thank you for purchasing this product. 
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Owner’s Manual
CD Stereo SystemModel No.
 SC-MAX650
PIf you have any questions, contact:1-800-211-PANA (7262)La referencia rápida en español se puede encontrar en la página\
 16.Register online at www.panasonic.com/register (U.S. customers only)max650.book  Page 1  Thursday, March 7, 2013  10:35 AM

00530055004C00510057004C0051004A...

2RQT9840Do the procedures with the remote control. You can 
also use the buttons on the main unit if they are the 
same.
Your system and the illustrations can look differently.
These operating instructions are applicable to the 
following system.
Inside of productSystem
SC-MAX650
Main unit SA-MAX650
Speakers SB-MAX650
The model number and serial number of this product can 
be found on either the back or the bottom of the unit. 
Please note them in the space provided below and keep 
for future reference....

3RQT9840
Safety precautionsWARNING!• To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or  splashing.
– Do not place objects fille d with liquids, such as 
vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by  yourself. Refer servicing to 
qualified service personnel.CAUTION!Unit
• To reduce the risk of fire, electric shock or product  damage,
– Do not install or place this unit...

4RQT9840
Supplied accessoriesCheck and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts. (Product numbers correct as of April 
2013. This may be subject to change.)
To order accessories, refer to “Accessory Purchases 
(United States and Puerto Rico)” on page 19.
1 x AC power supply cord
(K2CB2CB00022)
1 x AM loop antenna
(N1DYYYY00011)
1 x FM indoor antenna
(RSAX0002)
1 x Audio cable
(K2KYYYY00230)
1 x Remote control
(N2QAYB000636)
1 x Remote...

5RQT9840
Attaching the speaker feetFor stability and to prevent damage to the floor, attach the 
speaker feet to the bottom of the speakers.
Preparation
Put a protection layer below the speakers to prevent 
scratches.
Placement of speakersPut the speakers so that the tweeter is on the outside.
Use only the supplied speakers.
You can cause damage to the system and decrease the 
sound quality if you use other speakers.
Note:
• More than one person is required to move, tilt or carry 
the speaker. • Keep...

6RQT9840Over view of controls
RADIOEXT-IN
SOUND
PRESET EQ
D.BASSDISPLAYDIMMER
SLEEP
PLAY
AUTO OFF
ABCD
EGFH
JIKLNMOP
D.BASSALBUM/
 TRACK
SUPER WOOFERMANUAL EQPRESET EQ
USBOPEN/
CLOSE
MIC
MIN MAX
MUSIC PORT MIC VOL
EXT-INCD
1
2
3 4
5
6
DISPLAY DIMMER
TUNE MODE
ILLUMINATION
DJ 
RADIO
A
F
Q
REHH STE UV W X D K
Z
a
Z
bY
max650.book  Page 6  Thursd ay, March 7, 2013  10:35 AM

00530055004C00510057004C0051004A  

7RQT9840
A
Standby/on switch [` ], [ 1 ]
Press to switch the unit from on to standby mode or 
vice versa. In standby mode, the unit is still 
consuming a small amount of power.
B
Numeric buttons [1 to 9, 0,  10]
To select a 2-digit number
Example: 16: [ 10] =[1]= [6]
C
Delete a programmed track
D
Select audio source
E
Basic playback control
F
Select the sound effects
G
Auto preset the radio station
H
View content information
Decrease the brightness of the display panel
Press and hold [ −DIMMER] on the...

8RQT9840Making the connectionsConnect the AC power supply cord only after all the other connections have been made.1
Connect the speakers.
Connect the speaker cables to the terminals of the same color.
1a
1b
23
4
3
23
33
2
3
2
3
3
3
2
1a 1b
2
Connect the FM indoor antenna.
Put the antenna where reception is best.
3
Connect the AM loop antenna.
Stand the antenna up on 
its base until it clicks.
4
Connect the AC power supply cord.
Do not use an AC power supply cord from other 
equipment.
Conserving power...

9RQT9840
DiscPlaying disc1
Press [x OPEN/CLOSE] on the main unit to open 
the disc tray.
Put in a disc with the label facing up.
Press [x OPEN/CLOSE] again to close the disc 
tray.
2
Press [CD] and then press [4/9] to start 
playback.
Viewing available infor mationYou can view the available information on the display 
panel.
Press [DISPLAY].
Note:
• Maximum characters that can be shown: 
approximately 32
• This system supports ver.1.0 and 1.1 ID3 tags.
• Text data that the system does not support can...

10
RQT9840USBYou can connect and play music tracks from your USB 
device.
Do not use a USB extension cable. The system cannot 
recognize USB device co nnected through a cable.1
Decrease the volume and connect the USB 
device to USB A or USB B port.
Hold the main unit when connecting or 
disconnecting the USB device.
2
Press [USB] to select “USB A” or “USB B”.
3
Press [4/9 ] to start playback.
For other operations, refer to “Disc”.
Compatible USB devices which are defined as mass 
storage class:
• USB...