Panasonic CD Stereo System Sc Pm53 Operating Instructions

							Operating Instructions
CD Stereo System
Model No. SC-PM53
SC-PM533
RQTV0097-2P
 
 
 
 
SC-PM533 is available in the U.S.A. only.
Before connecting, operating or adjusting this product, please 
read the instructions completely.
Please keep this manual for future reference.
Operations in these instructions are described using remote 
control, but you can do the operations with the main unit if the 
controls are the same.
Unless otherwise indicated, illustrations in these operating 
instructions are of SC-PM53 for the U.S.A. and Canada.
Your unit may not look exactly as illustrated.
La guía rápida en español se encuentra en la página 18 - 23.
The illustrations show SC-PM53.
PPC
Table of contents
IMPORTANT SAFETY 
INSTRUCTIONS ..................................   3
Disc information .....................................   3
Getting started ........................................   4
Placement of speakers ...........................  5
Overview of controls ..............................   6
Discs ........................................................   7
Cassette tape ..........................................   9
Radio ........................................................  10
Timer ........................................................   11
Sound adjustment ..................................  12
External unit ............................................  13
Troubleshooting guide ...........................  14
Specifi cations .........................................  15
Maintenance ............................................   15
When moving the unit ............................  15
Limited Warranty 
(ONLY FOR U.S.A.) .............................  16
Limited Warranty 
(ONLY FOR CANADA) ........................  17
Product Service ......................................  17
SUPPLIED ACCESSORIESSUPPLIED ACCESSORIES
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts. (As of December 2005)
In the U.S.A. to order accessories, refer to “Accessory 
Purchases” on page 16.
1 x Remote control 
(N2QAYB000008)
1 x AM loop antenna
(N1DAAAA00001)
1 x AC power supply cord
(K2CB2CB00018)
1 x FM indoor antenna
(RSA0007-L)
2 x Remote control batteries 
EspañolEspañol
Preparativos iniciales ............................  18
Colocación de los altavoces ................   18
Controles ................................................   19
Discos .....................................................   20
Cintas de casete ....................................   21
Radio .......................................................  22
Temporizador .........................................   23
RQTV0097_2P_EN.indd   1RQTV0097_2P_EN.indd   12/6/06   3:33:54 PM2/6/06   3:33:54 PM 
						

							RQTV0097
2
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Dear customerThank you for purchasing this product.
For optimum performance and safety, please read these 
instructions carefully.
These operating instructions are applicable to the following 
system.
System SC-PM53 SC-PM533
Main unit SA-PM53 SA-PM533
Speakers SB-PM53 SB-PM53
The model number and serial number of this product can 
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep 
for future reference.
MODEL NUMBER 
SERIAL NUMBER 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
Except for U.S.A.
Inside of product
RQTV0097_2P_EN.indd   2RQTV0097_2P_EN.indd   22/6/06   3:34:01 PM2/6/06   3:34:01 PM 
						

							RQTV0097
3
ENGLISH English English
 
Disc information
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
• This unit can play MP3 or WMA fi les and CD-DA format audio 
CD-R/RWs that have been fi nalized.
• It may not be able to play some CD-R/RWs depending on the 
condition of the recording.
•  Do not use irregularly shaped discs.
•  Do not use discs with labels and stickers that are coming off or with 
adhesive exuding from under labels and stickers.
•  Do not attach extra labels or stickers on the disc.
•  Do not write anything on the disc.
CD•  This unit can access up to 99 tracks.
•  Choose a disc with this mark:
 
Using DualDiscsThe “CD” sides of DualDiscs do not meet the CD-DA standard so it 
may not be possible to play them on this unit.
MP3 WMA•  Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and 20 sessions.•  Disc must conform to ISO9660 level 1 or 2 (except for extended 
formats).
•  To play in a certain order, prefi x the folder and fi le names with the 
3-digit numbers in the order you want to play them.
 
 
 
 
 
 
 
 
 
Not doing the following will cause damage to the unit.
Removing the power plug
• “GOODBYE” is displayed when the unit turns off. Remove the  
power plug after this display disappears.
Tray caution
01&/$-04&
•  Always press [OPEN/CLOSE 0] to insert or remove a disc.
•  Do not push or pull out the tray by hand as this may cause an 
accident.
Inserting a disc
•  Place the disc label-up in the center or tray.
•  Insert only one disc into each tray.
RQTV0097_2P_EN.indd   3RQTV0097_2P_EN.indd   32/6/06   3:34:04 PM2/6/06   3:34:04 PM 
						

							RQTV0097
4
Step Step 11 - Making the connections - Making the connections
Connect the AC power supply cord only after all other connections have been made.
Optional antenna connectionsOptional antenna connections
FM outdoor antenna AM outdoor antenna
FM ANT
75
AM ANT
EXT LOOP
FM outdoor antenna 
(not included)
75 Ω coaxial cable 
(not included)
 
FM ANT
75
AM ANT
EXT LOOP
AM outdoor antenna 
  (not included)
AM loop antenna 
  (included)   (16 - 40 ft.)
•  Never use an outdoor antenna during a lightning storm. 
•  You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
•  Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
•  Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 - 40 feet) of vinyl-covered wire 
horizontally along a window or other convenient location.


L
R
HIGH (6
)LOW (6)
Getting started
4 Connect the AC power supply cord.
The included AC power supply cord is for use with this 
unit only. Do not use it with other equipment. 
3 Connect the speaker cords.
Incorrect connection can damage the unit.
RedBlue (·)Black (·)
Red (ª)
Gray 
(ª) Gray
Blue
Black
FM ANT
75

AM ANT
EXT LOOP
2 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a 
position with least amount of interference.
Adhesive 
tape
FM indoor 
antenna
1 Connect the AM loop antenna.
Stand the antenna up on its base. Keep the loose antenna cord 
away from other wires and cords.
AM loop antenna
RQTV0097_2P_EN.indd   4RQTV0097_2P_EN.indd   42/6/06   3:34:10 PM2/6/06   3:34:10 PM 
						

							RQTV0097
5
ENGLISH English English
Step 2 - Inserting batteries into the remote control - Inserting batteries into the remote control
AA/R6/LR6
■ Batteries
•  Insert so the poles (+ and –) match those in the remote control.
•  Remove if the remote control is not going to be used for a long period of 
time. Store in a cool, dark place.
•  Do not use rechargeable type batteries.
•  Mishandling of batteries in the remote control can cause electrolyte 
leakage, which may cause a fi re.
Do not:
•  mix old and new batteries.
•  use different types of batteries at the same time.
•  heat or expose to fl ame.
•  take apart or short circuit.
•  attempt to recharge alkaline or manganese batteries.
•  use batteries if their covering has been peeled off.
■ Use
•  Aim at the remote control sensor, avoiding obstacles, at a maximum 
range of 7
 m (23 feet) directly in front of the unit.
  Refer to page 6 for remote control signal sensor position.
SStep 33 - DEMO function - DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be 
shown on the display.
If the demo setting is off, you can show a demonstration by selecting 
“DEMO ON”.
Press and hold [–DEMO, 7].
The display changes each time the button is held down.
DEMO ON DEMO OFF
While in standby mode, select “DEMO OFF” to reduce power 
consumption.
Placement of speakers
Speakers are designed identically so that no left or right channel orientation is necessary.
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound 
quality will be negatively affected.
Note•  Keep your speakers at least 10mm (13/32˝) away from the system for proper ventilation.
•  These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily infl uenced 
by magnetism.
•  To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.
Caution
•  Use the speakers only with the recommended system. Failure to do so can damage the amplifi er and 
speakers, and can cause fi re. Consult a qualifi ed service person if damage occurs or if a sudden 
change in performance is apparent.
•  Do not attach these speakers to walls or ceilings.
RQTV0097_2P_EN.indd   5RQTV0097_2P_EN.indd   52/6/06   3:34:22 PM2/6/06   3:34:22 PM 
						

							RQTV0097
6
Overview of controls
Main unitMain unit
Refer to numbers in parentheses for page reference.
Cassette lid (9)
Remote control sensor  1 Standby/on switch (POWER y/l) (15)
Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit is 
still consuming a small amount of power.
4 Bass selection (12) 
Disc selection (7)8 Tuner/Band selection (10)
Disc tray (7)Headphone jack (
) 
Avoid listening for prolonged 
periods of time to prevent 
hearing damage.
Plug type: 3.5
 mm (1/8˝) stereo
(not included)
Cassette lid open (9)
Display panel
9 Volume control 7 Recording start/pause (9, 13) 2 Disc play/pause (7) 
3 Tape play (9) 
Changing disc (7) 6 Music port selection (13)
Top of unit
! H.BASS selection (13)
Checking disc position (8) AC supply indicator (AC IN)
This indicator lights when the unit is connected 
to the AC power supply.
Music port jack (13)
5 Treble selection (12) 
Disc tray open/close (7) Disc skip/search, tape fast-forward/
rewind, tune/preset channel selection, 
time adjustment (9) Stop/Demo (5, 9)
Remote controlRemote control
Buttons such as 1 function the same as the controls on the main unit.
1
Clock/Timer (11)
Play timer/Record timer (11)
Numeric (7, 10)
Delete (8)
Muting
Play mode (7, 9, 10) Disc (7)
Program (8)
Clear (8)
2
Re-Master (13) Sleep timer (11)
Preset EQ (12) Disc skip/search, tape fast-
forward/rewind, tune/preset 
channel selection, time 
adjustment (7, 10, 11)  Repeat (8)
6
Treble/bass 
adjustment (12)
4
!
7Display (8)
Dimmer
8
3
Stop (7)
9
5
Surround (13) Auto off
Album selection 
(7)
Enter (8)
     
This function allows you to 
turn off the unit in disc or 
tape mode only after left 
unused for 10 minutes.
The setting is maintained 
even if the unit is turned 
off.
Dims the display panel.
Mutes the sound.
•  Press the button to activate.
•  Press again to cancel.
RQTV0097_2P_EN.indd   6RQTV0097_2P_EN.indd   62/6/06   3:34:32 PM2/6/06   3:34:32 PM 
						

							RQTV0097
7
ENGLISH English English
Basic playBasic play
CD MP3 WMA
1Press [y] to turn the unit on.
2Press [1 3~ 5 3] to select your desired tray.
3Press [OPEN/CLOSE 0] to open the disc tray and 
then load the disc. Press [OPEN/CLOSE 0] again to 
close the tray.
Disc tray Label must 
face upward
Tray number
4Press [CD 6] to start play.
5Adjust the volume.
To Action
stop the disc Press [STOP 7].
pause play Press [CD 6]. Press again to 
resume play.
skip tracks  Press 
[4/REW/4] or [3/FF/¢] 
during play or pause.
search through tracks
CDPress and hold [4/REW/4] or[3/FF/¢] during play or pause.
direct play If the unit is on standby mode and a 
disc is loaded, press [CD 6] or 
[1 3 ~ 5 3] to start play.
skip album
MP3 WMAPress [ALBUM  or ] in the play 
mode.
Press [ALBUM 
 or ] once and 
then the numeric buttons in the stop 
mode.
Changing disc (CD CHANGE)Changing disc (CD CHANGE)
CD MP3 WMA
While one disc is playing, you can change the discs in other 
trays (except in All-Disc random play or program play).
1Press [CHANGE 0].
2Press [1 3~ 5 3] to select the tray.
3Change the disc.
4Press [CHANGE 0] again to close the tray.
Play Mode functionPlay Mode function
CD MP3 WMA
1Press [CD 6] and then [STOP 7].
2Press [DISC] and (within 10 seconds) press [1 ~ 5] to 
select the disc.
3Press [PLAY MODE] to select the desired mode.
Mode To play
1-DISC
1DISCone selected disc.
ALL-DISC
ALL DISCall discs in trays, e.g., 4→5→1→2→3.
1-TRACK
1TRone selected track on the selected 
disc.
Press the numeric buttons to select 
the track.
1-ALBUM 
1ALBUMMP3 WMA
one selected album on the selected 
disc.
Press [ALBUM 
 or ] to select 
the album.
1-DISC RANDOM
1DISC RNDone selected disc randomly.
1-ALBUM RANDOM
1ALBUM RNDMP3 WMA
all tracks in one selected album 
randomly.
Press [ALBUM 
 or ] to select 
the album.
ALL-DISC RANDOM
ALL DISC RNDall loaded discs randomly.
Note•  During any random play, you cannot skip to tracks that have been 
played.
• 
CDDuring 1-DISC RANDOM or ALL-DISC RANDOM play, you can 
search forward or backward only within the current track.
Discs
Disc trays Numeric 
buttons
RQTV0097_2P_EN.indd   7RQTV0097_2P_EN.indd   72/6/06   3:34:37 PM2/6/06   3:34:37 PM 
						

							RQTV0097
8
Discs (continued)
Checking which discs are in the trays (CD CHECK)Checking which discs are in the trays (CD CHECK)
CD MP3 WMA
1Press [CD CHECK].
2345
1
CD CHECK
2Press the button again to close the trays.
Note•  The tray with a disc being played will not open.
•  If the player is stopped, all trays will open.
•  Do not remove or insert discs during disc check.
•  Do not pull out the trays during disc check.
•  8 cm discs cannot be checked.
Display functionDisplay function
This function allows you to display the information of the 
current track.
Press [DISPLAY] repeatedly during play or pause mode.
CDElapsed time  Remaining time 
MP3 WMA
 Elapsed time  Remaining  
time  Album name  Track name 
Tag (Artist)
  Tag (Track)   Tag (Album) 
Note•  Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not 
supported will not be displayed.
•  ID3 is a tag embedded in MP3 tracks to provide information about 
the track.
Advanced playAdvanced play
Direct access playDirect access play
This function allows you to start play from a specifi c track.
CD
Press the numeric buttons to select and play your 
desired track.
MP3 WMA
1Press [ALBUM  or ] to select the album.
2Press [3/FF/¢] once and then the numeric buttons 
to select and play your desired track.
For two-digit track, press [
h10] once, and then the two 
digits.
For three-digit track, press [h10] twice, and then the three 
digits.
NoteThis function does not work during any random/program mode.
Repeat playRepeat play
You can repeat program play or other selected play mode.
CD MP3 WMA
Press [REPEAT] before or during play.
“REPEAT ON” and “  ”  are  displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ 
 ” is cleared.
Program playProgram play
This function allows you to program up to 24 tracks.CD
1Press [CD 6] and then [STOP 7].
2Press [PROGRAM].
3Press [DISC].
4(Within 10 seconds or so)
Press [1~5] to select your desired disc.
5Press the numeric buttons to select your desired 
track.
6Repeat steps 3 to 5 to program other tracks.
7Press [CD 6] to start play.
MP3 WMA
1Press [CD 6] and then [STOP 7].
2Press [DISC].
3(Within 10 seconds or so)
Press [1~5] to select your desired disc.
4Press [STOP 7].
5Press [PROGRAM].
6Press [ALBUM  or ] to select your desired 
album.
7Press [3/FF/¢] once and then the numeric buttons 
to select your desired track.
8Press [ENTER].
Repeat steps 6 to 8 to program other tracks.
9Press [CD 6] to start play.
To Action
cancel program mode Press [PROGRAM] in the stop mode. 
replay the program Press [PROGRAM] then [CD 6].
check program 
contentsPress 
[/REW/4] or [/FF/¢] when 
“PGM” is displayed in the stop mode.
To check while programming, press 
[PROGRAM] twice after “PGM” appears, 
then press 
[/REW/4] or [/FF/¢] .
add to the program
CDRepeat step 3 to 5 in the stop mode.
MP3 WMARepeat steps 6 to 8 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all programmed 
tracksPress [CLEAR] in the stop mode. “CLR ALL” 
is displayed. 
Note• When you try to program more than 24 tracks “PGM FULL” 
appears.
•  During program play, skipping is always in the programmed order, 
whether forward or backward.
•  You cannot program CD-DA together with MP3 and WMA tracks.
•  You cannot change or open other trays during program play mode.
• 
CDDuring program play, you can search backward or forward only 
within the current track.
• 
MP3 WMAThe program memory is cleared when you change a disc or open 
a disc tray.
RQTV0097_2P_EN.indd   8RQTV0097_2P_EN.indd   82/6/06   3:34:43 PM2/6/06   3:34:43 PM 
						

							RQTV0097
9
ENGLISH English English
Cassette tape
Cassette lid
Top of unit
The buttons described for “Cassette tape” are mainly 
for the main unit unless indicated otherwise.
Basic playBasic play
1Press [0] and insert the cassette.
Insert inside 
the guides
Forward side
2Close the lid by hand.
3Press [TAPE 3] to start play.To play the other side of the cassette, turn the cassette over. 
To Action
stop tape playback Press [–DEMO, 7].
start one-touch play Press [TAPE 3] when the unit is OFF with 
the cassette loaded.
fast-forward and 
rewindPress 
[4/REW/4] or [3/FF/¢] in the 
stop mode.
Note•  Tapes exceeding 100 minutes are thin and can break or get caught 
in the mechanism.
•  Endless tapes can get caught up in the deckʼs moving parts if used 
incorrectly.
TPS (Tape Program Sensor)TPS (Tape Program Sensor)
This function enables you to search the beginning of a track, 
up to a maximum of 9.
Press 
[4/REW/4] or [3/FF/¢] during play.
Play resumes from the track found.
NoteTPS may not function properly:
•  with short silent parts
•  when noise occurs between tunes
•  if silent parts found within tunes
RecordingRecording
Use normal position tapes.
High position and metal position tapes can be used, but this 
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin 
immediately.
Recording the radioRecording the radio
1Insert the cassette to be recorded.
2Tune to the required station (refer to page 10).
3Press [¶ REC/8] to start recording.
Recording discsRecording discs
1Insert the cassette to be recorded.
2Press [CD 6] and then [–DEMO, 7].
3Press [OPEN/CLOSE 0] to insert the disc. Press 
again to close.
4Press [PLAY MODE] on the remote control to select 
your desired mode (refer to page 7).
5Press [¶ REC/8] to start recording.
Recording programmed tracksRecording programmed tracks
1Insert the cassette to be recorded.
2Program the tracks you want (refer to page 8).
3Press [¶ REC/8] to start recording.
Other basic operationsOther basic operations
To Action
erase a recorded 
sound1) Insert the cassette to be recorded.
2) Press [TAPE 3] and then [–DEMO, 7].
3) Press [¶ REC¥8].
stop recording Press [–DEMO, 7].
stop recording 
temporarily1) Press [¶ REC¥8].
2) Press again to resume recording.
record on the other 
side of the tapeTurn the cassette over and press 
[¶ REC¥8].
You can perform the same operation of [¶ REC¥8] on the 
main unit by pressing [REC ¶¥8] and [TAPE] simultaneously 
on the remote control.
Erasure preventionErasure prevention
The illustration shows how to remove the tabs to prevent 
recording. To record on the tape again, cover as shown.
Side A
Tab for 
side A Tab for 
side BTo re-record
Normal tape
Adhesive tape
RQTV0097_2P_EN.indd   9RQTV0097_2P_EN.indd   92/6/06   3:34:48 PM2/6/06   3:34:48 PM 
						

							RQTV0097
10
Radio
Numeric 
buttons
Manual tuningManual tuning
1Press [TUNER/BAND] to select “FM” or “AM”.
2Press [PLAY MODE] to select “MANUAL”.
3Press [4/REW/4] or [3/FF/¢] to select the 
frequency of the required station.
“ ST ” is displayed when a stereo FM broadcast is being 
received.
To tune automatically
Press 
[4/REW/4] or [3/FF/¢] for a moment until the 
frequency starts changing rapidly. The unit begins auto 
tuning, stopping when it fi nds a station.
•  Auto tuning may not function when there is excessive 
interference.
•  To cancel auto tuning, press 
[4/REW/4], [3/FF/¢] or 
[STOP 7].
To improve FM sound qualityTo improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO” 
disappears.
•  MONO is also canceled if the frequency is changed.
•  Turn off “MONO” for normal listening.
Memory presetMemory preset
Up to 15 stations can be set in both the FM and AM bands.
Preparation
Press [TUNER/BAND] to select “FM” or “AM”.
Automatic presettingAutomatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presettingManual presetting
1Press [PLAY MODE] to select “MANUAL”.
2Press [4/REW/4] or [3/FF/¢] to tune to the 
required station.
3Press [PROGRAM].
4Press numeric buttons to select a channel.
The station occupying a channel is erased if another 
station is preset in that channel.
5Repeat steps 2 to 4 to preset more stations.
Selecting a preset stationSelecting a preset station
Press numeric buttons to select the channel.
For channels 10 to 15 press [h10], then the two digits.
OR
1Press [PLAY MODE] to select “PRESET”.
2Press [4/REW/4] or [3/FF/¢] to select the 
channel.
FM allocation settingFM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in 
0.1 MHz steps.
To change the step to 0.1 MHz
1Press and hold [TUNER/BAND].
After a few seconds the display changes to a fl ashing 
display of the current minimum frequency.
2Continue to hold down [TUNER/BAND].
•  When the minimum frequency changes, release the 
button. To return to the original step, repeat the above 
steps.
•  After the setting is changed, any previously preset 
frequency will be cleared.
RQTV0097_2P_EN.indd   10RQTV0097_2P_EN.indd   102/6/06   3:34:55 PM2/6/06   3:34:55 PM