Panasonic Cf 08 Owners Manual

41
Software Keyboard
The Software Keyboard can be displayed on the wireless display, and you can 
then input characters or symbols by tapping the Software Keyboard. 
To show or hide the Software Keyboard (input 
panel) (at the time of purchase):
zPress the keyboard button   for less than 
2 seconds.
„Input methods
Numeric Keyboard, Full Keyboard and Transcriber can be used.
Numeric Keyboard and Full Keyboard can be selected as either large or small panels.
zTo use Transcriber, refer to “Transcriber”...

42
Software Keyboard
(At the time of purchase, this wireless display is set to 
display the Input Panel Selector Screen using the fol-
lowing method.) 
• Press the keyboard button for more than 2 seconds. 
(Îpage 38)
• Press the USER button for less than 2 seconds to 
launch Quick Menu (Îpage 39), and then tap [Input 
Panel selector].
zDisplay the [Keyboard Options] screen and select the input method in the fol-
lowing procedure.
ADouble-tap [Input Panel] in [Control Panel].
BIn the [Input Panel...

43
Option settings
The following settings can be made by tapping each tab. 
„[Quick Settings] tab
A. Option settings
Display the [Transcriber: Options] 
screen of Transcriber option set-
tings. (Î below)
B. Change recognition mode
Run hand/block letter (character 
(alphabet/symbol/numeric)).
C. Display symbol input panel
Display the screen for symbol input.
D. Change upper/lower/symbol 
mode
Change input mode to upper/lower/
symbol mode.E. Space
Input space.
F. Line feed
Insert line feed.
G. L e f t  m o...

44
Software Keyboard
„[Inking] tab
„[Advanced] tab
A. Recognition Delay
Slide the bar to set the time for rec-
ognition of handwritten characters.
B. Add space after
If the check mark is added, when 
handwritten characters are recog-nized and displayed on the screen, 
a single space will also be displayed 
at the end of each character.
C. Pen
Tap to set the width and color of the 
ink.
A. Shorthand
Register shorthand. For further 
information, refer to “Shorthand” 
(Îpage 45).B. Dictionaries
Select a...

45
„Shorthand
The following functions can be assigned for handwriting input.
Text expansionFunctionRun program
Display words, phrases, 
or sentences.Display dates, names, or 
other information.Start up a program.
e.g.: Input “ABC” in 
handwriting
 to display 
“Hello.”e.g.: Input “DEF” in 
handwriting to display 
the date and time.e.g.: Input “GHI” in 
handwriting to start up 
[Command Prompt].
ATap [Settings] to the right of “Shorthand.”

BTap [Add].

CSelect the function that you want to assign, and...

46
Software Keyboard
FTap [Finish].
The screen will automatically return to step B.
To assign two or more functions in succession, repeat step B to F.

GTap .

HTap   to close the [Transcriber: Options] screen.

ISave the above setting. 
Refer to step 
9 of “First-time Operation” (Îpage 27).
CF-08.book  46 ページ  ２００６年４月６日　木曜日　午後６時３８分 

47
Signature Capture
Signature Capture operates on CF-08, supporting input of signatures in applications
running on the connection destination server.
At the time of purchase, this wireless display is not preset to enable startup of Signature Capture. 
Before using Signature Capture, set the wireless display to enable startup using 
one of the following methods.
„To use Signature Capture:
ALaunch Signature Capture with the keyboard button, USER button or Quick Menu.
BTap  , and then tap [Setting].
You...

48
SD Memory Card
About SD Memory Card
An SD Memory Card can be used for the following purposes.
zThe exchange of data with various devices equipped with an SD Memory Card 
slot, and so on.
zUse as a memory card (e.g., use as a storage unit on which files can be written).
Inserting/Removing a Card
1 Open the SD Memory Card slot cover and confirm the SD 
Memory Card indicator   is off.
2 Insert/Remove a Card.
„To insert the card
Insert the SD Memory Card until it snaps into place as shown in the...

49
Bluetooth
To enable Bluetooth
1 Double-tap   on the desktop.
2 Double-tap [Bluetooth Device Properties].
3 Tap the [General] tab, and make the necessary settings.
4 Tap [Apply] (E) to reflect the settings.
To make connections with the serial port: Îpage 50
To make connections with the dial-up network: Îpage 51 A.Enable Bluetooth
Add the check mark for [Enable Blue-
tooth] to enable Bluetooth.
B.Serial Port / DialUp Network
Add the check mark for [Serial Port] 
or [DialUp Network] to make connec-
tions...

50
Bluetooth
„To make connections with the serial port
Tap the [Serial Port] tab, and make the following procedure.
ATurn on the Bluetooth device.
BTap [Select Device] (A).
zIf you add the check mark for [Auto Reconnect] (C), the connection will 
be made automatically when Bluetooth is enabled.
CTap [Search] (D).
DTap the Bluetooth device name you want to connect from the list box (E).
ETa p   ( F ) .
FTap [Connect] (B).
When the [Enter PIN code] screen appears, enter the pin code, and then tap 
[OK]....