Panasonic Cf Y2 Owners Manual

							41
Appendix
A. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les
Logiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir quun
droit limité dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez à nobtenir aucun
droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant ni vis-
à-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou incorporés dans les Logiciels
et la documentation les accompagnant, dont les titres, propriété et droits resteront tous à MEI ou à leurs propriétaires.
B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.
C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez ni
distribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition dun tiers, par partage de
temps ou de quelque autre manière que ce soit, sans lautorisation écrite préalable de MEI.
D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documenta-
tion les accompagnant pour quelque fin que ce soit, à lexception dune (1) copie des Logiciels à des fins de
sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagné
par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.
E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie quen rapport avec votre cession
du Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vous
devez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous les
Logiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.
F. Vous ne pouvez retirer aucune marque de droits dauteur, marque ou autre ni aucune identification de produit des
Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies
des Logiciels.
Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs
copies, de façon électronique ou mécanique, en tout ou en partie.
Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie, à
lexception de ce qui est expressément stipulé dans ce contrat.
Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à lexception de ce qui est autorisé au
paragraphe E ci-dessus, votre licence est automatiquement résiliée.Licence
Termes, clauses et conditions
Cette licence nest effective que pour la durée de possession ou de crédit-bail du Produit, à moins dune résiliation
antérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentation
les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée, avec
application immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vous ne
respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez de
détruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme
que ce soit.
Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,
clauses et conditions. Vous reconnaissez en outre quils sont la description complète et exclusive du contrat conclu
entre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre communi-
cation entre nous, relativement à lobjet du présent contrat. Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic
® (le “Produit”) sont exclusivement concédés en
licence à lutilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles ci-
dessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et condi-
tions des présentes.
Matsushita Electric Industrial Co., Ltd. (“MEI”) a mis au point ou obtenu les Logiciels et vous en concède lutilisation par
les présentes. Vous assumez lentière responsabilité du choix de ce Produit (y compris des Logiciels associés) pour
obtenir les résultats escomptés, ainsi que de linstallation, de lutilisation et des résultats obtenus.
Contrat de licence d’usage limité 
						

							42
Appendix
Hard Disk Backup Function
The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk
contents or restore backed up contents to their original locations.
By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from operational
errors or other factors.  Also, you can back up or restore hard disk contents using this computer alone, without having to use other
media or peripheral devices.
At the time of purchase, the hard disk backup function is disabled.  If you follow the procedure below to create a backup area, the
hard disk backup function will be enabled, and you will be able to back up your data.  Note, that once the backup function has been
enabled, you will have to perform the reinstallation procedure to disable it again (
 page 38).
Disconnect or remove all peripheral devices, SD memory cards, and MultiMedia Cards.  Take
care to disconnect the USB floppy disk drive, as the backup area may not be created properly
while these devices are connected.
Be sure the AC adaptor is connected to the computer.
A backup area cannot be created if the hard disk is already divided into several partitions.  Return
the computer to its condition at the time of purchase (one partition only), and create the backup
area.
To divide the partition, make the selection when the backup area is created ( page 44 step 7).
If the partition configuration is changed (partitions created, size changed, etc.) after the backup
area has been created, it will no longer be possible to execute the backup function.  To change the
configuration, it is necessary to return the computer to its condition at the time of purchase, and
then create the backup area again.
The hard disk backup function will only work for the internal hard disk. This function does not
work with an external hard disk.
Backup and restore functions will not operate if the hard disk has been damaged.
Do not use the NTFS file system compression function, as this may result in insufficient capacity
of the backup area.
If the hard disk malfunction occurs, it will be impossible to read the data stored hard disk.  We
recommend that you also back up important data to a location other than the hard disk (an external
hard disk or other media).
Execute a disk error check using the following procedure.
1Display the [Local Disk(C:) properties].
Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select [Properties].
2Select [Check Now] from [Tools].
3In [Check Disk], select [Start] without adding a check mark beside any of the items.
If a message is displayed indicating that there is an error in the disk, display [Check Disk], and
add a check mark for [Automatically fix file system errors] and [Scan for and attempt recovery
of bad sectors], select [Start], and check for disk errors again.
The hard disk backup function does not accommodate dynamic disks.  Do not convert the hard
disk to a dynamic disk. The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when the data is
backed up or restored.  Note that if an error occurs while data is being restored, whether as a result of an unexpected malfunction,
incorrect operation, or other reason, the data in the hard disk (data before restoration) may be lost.
Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss of data)
as a result of the use of this function.
Before Using a Hard Disk Backup Function
Preparing
You will need the Product Recovery DVD-ROM (included). 
						

							43
Appendix
1Turn the computer on, and press   F2   while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password.
You cannot register [Boot] menu with a User Password.
2Select [Boot] menu, then select [CD/DVD Drive] and press   F6    until [CD/DVD Drive] is at
the top of [Boot] menu.
3Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW drive.
When disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Perform the following
procedure.
Set [CD/DVD Drive Power] to [On].
ã
Press    F10  .
At the confirmation message, select [Yes] and press  Enter  .
The computer will restart.
ã
Press   F2   while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
ã
Set the Product Recovery DVD-ROM, and execute Step 
4.
4Press    F10  .
At the confirmation message, select [Yes] and press
  Enter  .
The computer will restart. If [Enter Password] is displayed during the following procedures, input
the Supervisor Password or the User Password.
This screen should appear.
Regarding backup area
• Requires availability of at least half of the entire hard disk.  Without sufficient space
available, the backup area cannot be created.
• When the backup area is created, the usable hard disk capacity will be reduced to less
than half.
• The backup area cannot be accessed from Windows.  For this reason, backed up data
cannot be copied to CD-R or other removable disk media.
• When the hard disk backup function is executed, data in the backup area will be over-
written.  If newly created or edited data is backed up later, data stored previously
in the backup area will be lost.
NOTE
Create a Backup Area
When dividing the hard disk into partitions
Do not execute [1. [Recovery]] to divide the hard disk into partitions.  The hard disk
backup function cannot be enabled after the hard disk has been partitioned.  Use proce-
dure 
7 to divide the hard disk.
CAUTION
---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup ]Enable the Backup function.
0. [ Cancel ] Cancel.
---------------------------------------------------------------------
5Press   3    to execute [3. [Backup]].
6At the confirmation message, press   Y   . 
						

							44
Appendix
Hard Disk Backup Function

Select [2], enter the partition size (GB), and press   Enter   .
• You can cancel this operation by pressing    0   .
• The data partition size will be the maximum settable size less the number entered above.
The maximum settable size will differ depending on models.
8At the confirmation message, press    Y   .
The backup area is then created.
9When the message [You must reboot in order to enable the Backup function.] appears, remove
the Product Recovery DVD-ROM, and press any key to restart the computer. The computer is
restarted, then the backup process will begin.
10 When the message [[Backup] is complete] appears, press   Ctrl   +   Alt   +   Del    to restart the
computer.
11After logging on to Windows, a message will appear advising that a new device has been
installed and that the computer must be restarted to enable the settings.  Select [Yes] to restart
the computer.
The [Boot] menu in the Setup Utility is set to start up from the DVD-ROM & CD-R/RW
drive. Change this setting if necessary.
The next time the backup or restore functions are executed, follow the procedure for [Backing
Up and Restoring Data] (
 page 45).
NOTE
The usable hard disk area [At the time of purchase]
[After the backup area is created]
The backup area
Cannot be accessed
from Windows.
Do not press   Ctrl   +   Alt   +   Del   until the message is displayed.
CAUTION
Can be accessed from
Windows (Two partitions).
The usable hard disk area [At the time of purchase]
[After the backup area is created]
The backup area
Cannot be accessed
from Windows.Can be accessed from
Windows (One partition).
7Select how to divide the hard disk from the menu.

Select [1]. 
						

							45
Appendix
To disable the hard disk backup function
Perform the reinstallation procedure. All data in the backup area and the hard disk will be erased.
Conduct steps 
1-7 for [Reinstalling Software]  ( page 38). Select [1] or [2] to execute the
reinstallation at the screen for executing the reinstallation.
• When [1] is selected, the hard disk backup function can be disabled.
• When [2] is selected, the hard disk backup function can be disabled, but in this case, because
the hard disk has been divided into partitions, the hard disk backup function cannot be re-
enabled  (
 page 25).
• When [3] is selected, the hard disk backup function cannot be disabled.
CAUTION
When the hard disk backup function has been enabled, even if a commercial data erasing
utility or similar software is used to erase all data from user-accessible area, the backed up
data will not be erased.  You can use the hard disk data erase utility included in this computer
(
 page 47) to erase all data on the hard disk, including backed up data. Use this hard disk
data erase utility before disposing of or transferring ownership of this computer.
Occasionally, the message [#1805 cannot write image file] will be displayed, and the backup
function will be interrupted.  If this error occurs, execute the backup function again.  After
this, if the backup function is completed properly, then there is no problem in the hard disk.
3Select the operation to be executed from the menu.

1
Press ç1ççto execute [1. [Backup]].
(When dividing the hard disk into two partitions, select the backup method at next screen.)
2
At the confirmation message, press   Y   .
The backup process will begin.

1
Press ç2ççto execute [2. [Restore]].
(When data is backed up in two partitions, select the restore method at next screen.)
2
At the confirmation message, press   Y   .
The restore process will begin.
4When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press
çCtrl
ç çç ç
ççòçAltççòççDel ç to restart the computer.
•  If the backup or restore process was interrupted before completion, for example if the power
was turned off, execute the process again.
•  When a new device is installed and a message appears advising that the computer must be
restarted to enable the settings, select [Yes] to restart the computer.
The time required to complete the backup or restore process differs depending on the data
volume.
NOTE
1Turn the computer on, and press   F2   while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password or the User Password.
2Select [Exit] menu, then select [Hard Disk Backup / Restore] and press çEnter   .
At the confirmation message, select [Yes], and press  çEnter   .
Backing Up and Restoring Data
Before executing the backup function, execute a disk error check ( page 42).
Do not interrupt the backup or restore functions before completion, for example by turning
off the power or pressing   Ctrl   +   Alt   +   Del   , as this may prevent Windows from starting
up, or may cause data to be lost so that the backup and restore functions cannot be executed.
CAUTION 
						

							46
Appendix

If you select [3] in step 
8 ( page 38) and execute reinstallation, the drive name for the second
partition (data partition) may be switched with that of the SD Memory Card.  You can still use the
drives after the names have been switched, but you can also return the drive names to their original
state using the following procedures.
(The following procedure assumes that before reinstallation, the second partition (data partition)
was Drive D:, and the SD Memory Card was Drive E:)
1Disable the drive name for the second partition (data partition).
1In the menu below, select [Computer Management].
Select [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools].
2Select [Disk Management].
3Right click on the partition for which [E:] is displayed and select [Change Drive Letter and
Paths...].
4Select [Remove].
5At the confirmation message, select [Yes].
2Change the SD memory card drive name to [E:].
Use the SD drive name change tool to change the SD Memory Card to the E: drive. (
 
SD Memory Card/ MultiMedia Card).
3Set the drive name for the second partition (data partition) as [D:].
1In the menu below, select [Computer Management].
Select [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools].
2Select [Disk Management].
3Right click on the partition for which the drive name is not displayed, and select [Change
Drive Letter and Paths...].
4Select [Add...], assign [D:] as the drive letter, and select [OK].
Hard Disk Backup Function 
						

							47
Appendix
Hard Disk Data Erase Utility
This computer is equipped with a utility for erasing hard disk data.
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk
data following the steps below.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that
has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that
specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as
a result of the use of this utility.
Preparing
You will need the Product Recovery DVD-ROM (included).
When the message [The Backup function has been enabled.
If [Recovery] or [Erase HDD] is executed, the Backup func-
tion will be disabled, and your Backup data will be lost.]
appears, press
Y   .
5Press   2   to execute [2. [Erase HDD]].
(You can cancel this operation by pressing   0   .)

When the message [The Backup function has been enabled.
If [Erase HDD] is executed, the Backup function will be dis-
abled, and your Backup data will be lost.] appears, press
Y   .
When the message [Computer must be rebooted in order to
execute [Erase HDD.]] appears, press
  R   .
6At the confirmation message, press   Y   .
7When [] is displayed, press    Enter   .
8The approximate time required for erasing data will be dis-
played.
Press   Space   .
9At the confirmation message, press   Enter   . The operation
of erasing the hard disk will start.
(If necessary, the “hard disk data erase” operation can be
cancelled after it has begun by pressing    Ctrl   +   C   .
If the operation is cancelled before being completed, a part
of data will not be erased.)
10After the operation is complete:
Under normal conditions, the message [Hard disk data has
been deleted.] will be displayed.
If a problem occurred during the operation, an error message
will be displayed.
11Remove the Product Recovery DVD-ROM, and then press
any key to turn off the computer.
Procedure
NOTE
Be sure the AC adaptor is connected until the procedure is completed.
This utility can only be used for internal hard disk.  It cannot be used to erase data from external hard disks.
This utility cannot erase data from damaged disk.
This utility cannot erase data for specific partitions.
After executing this utility, the computer cannot be booted from the hard disk.
The backup area and the data in the backup area will be erased.
1Turn the computer on, and press   F2   while [Panasonic]
boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Pass-
word.
2Select [Boot] menu, then select [CD/DVD Drive] and press
   F6   until [CD/DVD Drive] is at the top of [Boot] menu.
3Place the Product Recovery DVD-ROM into the DVD-ROM
& CD-R/RW drive.
When disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main]
menu. Perform the following procedure.
Set [CD/DVD Drive Power] to [On].
ã
Press    F10  .
At the confirmation message, select [Yes] and press
Enter  .
The computer will restart.
ã
Press   F2   while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
ã
Set the Product Recovery DVD-ROM, and execute Step 
4.
4Press    F10   .
At the confirmation message, select [Yes] and press
   Enter    .
The computer will restart, and this screen should appear.

---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup ] Enable the Backup function.
0. [ Cancel ] Cancel.
--------------------------------------------------------------------- 
						

							48
Appendix
Specifications
Model No.
CPU/Cache
Memory
Video Memory
Hard Disk Drive
LCD Type
Displayed Colors*5
External Display
DVD-ROM & CD-R/RW Drive
Supports DVD
CD
DVD-ROM read*9
CD-ROM read*9
CD-R write*10
CD-RW write
High-Speed CD-RW write
Ultra Speed CD-RW write*11
Slots PC Card Slot
Allowable current
RAM Module Slot*13
SD Memory Card Slot
Interface External Display Port
Microphone Jack
Headphone Jack
USB Ports
Modem
LAN
Wireless LAN
Keyboard/Pointing Device
Sound
*
11 MB = 1,048,576 bytes
*2There are two modes: Max. 266 MHz (equivalent to PC2100) and Max. 333 MHz (equivalent to PC2700).  These modes can
be switched using [Memory/Video Power Save] in the Setup Utility.
At the time of purchase, [Memory/Video Power Save] is set to [Battery Optimized] (266 MHz (equivalent to PC2100)).  When
changed to [Max Performance], this becomes 333 MHz (equivalent to PC2700).
*
3A segment of the main memory is allotted automatically depending on the computer’s operating status.  The size of the
Video Memory cannot be set by the user.
*
41 GB = 1,000,000,000 bytes. Operating system or some application software will report as fewer GB.
*5A 16,777,216 color display is achieved by using the dithering function.
*6Maximum resolution depends on the specifications of the external display.
*7Read only.
*8In the case of DVD-RAM, only non-cartridge disks or removable cartridge disks can be used.
*9If an unbalanced disk (e.g., a disk with which the balance has been displaced from the center) is inserted, the speed may
become slower if there are large vibrations while the disk is rotating.
*
10Depending on the disk, the writing speed may become slower.
*11Does not support 24X speed rewriting.
*12Does not support 4X speed.
*13Options: CF-BAU0256U (256 MB), CF-BAU0512U (512 MB) Contact your technical support office. ( page 50)
*14Only a RAM module designed for PC2700 can be added.
*15The settings for the K56flex modem need to be changed according to the AT command.
Main Specifications
CF-Y2EWAZZBM
Intel® Pentium® M Processor 738 (1.40 GHz, 2MB*1  L2 cache, 400MHz FSB)
256 MB*1  (768 MB*1 Max.), DDR SDRAM*2
UMA  (64 MB*1 Max.)*3
Approx. 40 GB*4
14.1 SXGA+ type (TFT)
65,536/16,777,216 colors (1400 × 1050 dots)
65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 1024 dots/
1400 × 1050 dots/1600 × 1200 dots)*6
Buffer underrun error prevention function: Supported
DVD-ROM (Single Layer, Dual Layer), DVD-R*7(3.95 GB*4, 4.7 GB*4), DVD-RW*7
(4.7 GB*4), DVD-RAM*7*8 (2.6 GB*4, 4.7 GB*4)
CD-Audio, CD-ROM, CD-R, Photo CD, VideoCD, Enhanced Music CD, CD-RW,
CD-TEXT
8X speed (Max.)
24X speed (Max.)
4X speed, 8X speed, 8-16X speed, 8-24X speed
4X speed
4X speed, 8X speed, 10X speed
8X speed, 10X speed, 8-16X speed*12
One Type I or Type II
3.3 V: 400 mA, 5 V: 400 mA
172-pin, 2.5 V, Micro DIMM, DDR SDRAM, PC2700 Compliant*2 *14
SD memory card/MultiMedia Card
Mini Dsub 15-pin female
Miniature jack, 3.5 DIA
Miniature jack, 3.5 DIA
4-pin × 2, USB 2.0
RJ-11 jack, Data: 56 kbps (V.92 & K56flex)*15   FAX:14.4 kbps
RJ-45 jack, IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
    page 49
87 keys/Touch Pad
WAVE and MIDI playback, Stereo Speaker (built in) 
						

							49
Appendix
Main Specifications
Battery Pack
Operating Time*1
Charging Time*4
Clock Battery
AC Adaptor*5Input
Output
Power Consumption*6
EnvironmentOperationTemperature
Humidity
Storage Temperature
Humidity
Physical Dimensions (W × H × D)
Weight
Operating System
Utility ProgramsLi-ion 7.4 V, 7.05 Ah
Approx. 4 hours - 7hours*2 (Approx. 5 hours*3)
Approx. 5.5 hours
Coin type lithium battery 3.0 V
100 V - 240 V AC, 50 Hz/60 Hz
16 V DC, 2.5 A
Approx. 40 W (Maximum when recharging in the ON state)
5 °C to 35°C  {41 °F to 95 °F}
30% to 80% RH  (No condensation)
-20 °C to 60 °C  {-4 °F to 140 °F}
30% to 90% RH  (No condensation)
309 mm × 33 mm (at the front)/46 mm (at the rear) × 243 mm (excluding protru-
sion){12.2  × 1.3  / 1.8  × 9.6 }
Approx. 1520 g {3.4 lb.}*7
Microsoft® Windows® XP Professional Service Pack 2 with Advanced Security
Technologies
Adobe Reader, Intel® PROSet/Wireless Software, SD Utility,  Icon Enlarger, Loupe
Utility, Touch Pad Utility, DMI Viewer, PC Information Viewer, WinDVD™5 (OEM
Version), B’s Recorder GOLD7 BASIC, B’s CLiP 6, Hotkey Settings, Optical Disc
Drive Power-Saving Utility, Wireless LAN Switch
Setup Utility,  Hard Disk Data Erase Utility*8, Hard Disk Backup Utility*8
*1Measured value when [Memory/Video Power Save] in the Setup Utility is set to [Battery Optimized] (RAM 266 MHz (equiva-
lent to PC2100)) (condition at the time of purchase).
Varies depending on the usage conditions, CPU speed, etc.
*
2Measured using BatteryMark™ Version 4.0.1 (LCD brightness: Maximum - Minimum)
*3Measured using MobileMark™ 2002 (LCD brightness: 60 cd/m2)
*4Varies depending on the usage conditions, CPU speed, etc.
*5
The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC
compatible AC cord.
*
6Approx. 1.5 W when the battery pack is fully charged (or not being charged) and the computer is off.
*7Average value.  May differ depending on models.
*8The Product Recovery DVD-ROM is required.
Wireless LAN
Data Transfer  Rates
Standards Supported
Transmission Method
Wireless Channels Used
RF Frequency BandIEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)
IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)
IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)
IEEE802.11a/IEEE802.11b/IEEE802.11g
OFDM system, DSSS system
IEEE802.11a: Channels 36 to 64, 149 to 165
IEEE802.11b/IEEE802.11g: Channels 1 to 11
IEEE802.11a: 5.18~5.32 GHz, 5.725~5.825 GHz
IEEE802.11b/IEEE802.11g: 2412~2462 MHz 
						

							50
Appendix
PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY
Panasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate
warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in
materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are
covered for a period of one (1) year from the date of purchase.
This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before
warranty performance is rendered.
This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which
occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse,
introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance,
modification or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts
of God.
Limits and Exclusions:
There are no other express warranties except as listed below.
PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY
PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product
develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your
satisfaction, then write to the Consumer Affairs Division at the address indicated below.
SOFTWARE LIMITED WARRANTY
Panasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs are
furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof
to you, as evidenced by your purchase receipt.
This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your
requirements or that the operation of the Programs will be uninterrupted or error free.
Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective
disk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid
warranty period.
Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which
the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media
otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse,
neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is
attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or
attempted to modify any Program.
DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.
PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,
ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEG-
LIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF
USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIP-
MENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.
*          *          *
To obtain service or technical assistance within the continental U.S.A. and Alaska.
DIAL TOLL FREE: 1-800-LAPTOP5
Correspondence requesting product information should be sent to:
Panasonic Computer Solutions Company
50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094
For U.S.A.
LIMITED WARRANTY