Panasonic Cf29 Service Manual

7-13
n
 Arranging the LCD Back Holder
1. Attach the two LCD Cable Tapes to the LCD Back Holder.
n  Attaching the LCD Damper Front, LCD Si de Damper UN/R13 and TS Spacer L13/S13
1. Attach the LCD Damper Front to the upper part of the LCD Unit.
2. Attach the LCD Side Damper UN to the left side of the LCD Unit.
3. Attach the LCD Side Damper R13 to the right side of the LCD Unit.
4. Attach the TS Spacer L13 and the two TS Spacer S13 to the all sides of the LCD Unit.
0~1mm
0~1mmLCD Cable Tape
LCD Back...

7-14
n
 Attaching the LCD Thermal Plate, LCD Hold Plate L and LCD Hold Plate R
1. Attach the LCD Thermal Plate to the LCD Unit.
2. Fix the LCD Plate L and LCD Hold Plate R to sides of the LCD Unit using the two Screws.
Screws : DXYN2+C3FNL
n  Attaching the LCD Back Holder, LCD Back Damper Ass’y and Inverter Damper
1. Attach the LCD Back Holder to the LCD Unit.
2. Attach the two LCD Back Damper Ass’y to the LCD Unit and LCD Back Holder.
3. Attach the two Inverter Damper to the LCD Unit.
View A...

7-15
n
 Attaching the Inverter PCB and TS PCB
1. Attach the Inverter PCB to the LCD Back Holder of the LCD Unit and connect the two Cables to the two Connectors on the
Inverter PCB.
2. Attach the TS PCB to the LCD Back Holder of the LCD Unit and connect the two Cables to the two Connectors on TS PCB.
LCD Cable
Connector
Connectors Connectors
Terminal side is up.
TS PCB
Inverter PCB
Ta p e
Ta p e
Ta p e
LCD Back 
Damper Assy
LCD Plate R
LCD Plate R Connector
LCD Inverter 
Case Spacer L
LCD Conductive...

7-16
n
 Arranging the Cables
TS FFC Sheet TS FFC Sheet
IC
TS PCB
TS PCB Kapton Tape
Inverter PCB
Sheet
IC
0~1mm
0~1mm 8±1mm
LCD Cable Tape
LCD Cable Tape
View BView BView A
View C
View DView EView D
View A
View B
Inverter PCB
Inverter Case
LCD Plate R
Press
Cable
Attaching the LCD Cable Tape
View C
View DView E
Inverter 
Case Inverter 
Case
LCD Back 
Holder Inverter PCB
Bosses
Cable should be in Bosses. Bosses
Cable
LCD Front 
Cabinet
Cable
LCD Cable Tape
LCD Back 
Holder
0~1mm
Draw out the rest of...

7-17
7.2.4. Setting the LCD Rear Cabinet, Hinge L and Hinge R
1. Fix the Hinge L and R using the two Screws. 
2. Set the Latch.
3. Set the LCD Front Cabinet to the LCD Rear Cabinet.
4. Fix the LCD Front Cabinet using the two Screws.No1, No2
5. Fix the LCD Front Cabinet using the ten Screws.
6. Fix the LCD Front Cabinet using the two Screws. 
Note: Tighten the Screws in the numbered order (No1, No2).
Screws : DRSB4+10FKL
Screws :DRSB26+8HKL
Screws :DRSB26+8HKL
Screws : DRHM0062ZA
7.2.5. Setting the LCD...

7-18
7.2.6. Setting the Handle and Power SW
1. Set the Power SW.
2. Set the Handle.
3. Fix the Handle Base Land R using the two Screws.
Screws : DRSB4+8FKL
7.2.7. Setting the Palm Top Cover Sheet, Palm Top Cover, Touch Pad Adhesion Seat, Touch Pad, Touch Pad SW Knob, LED PCB and SW LED PCB
1. Set the SW LED PCB.
2. Attach the Power LED Packing Sheet to the LED Spacer
Sheet.
3. Attach the LEDX6 Spacer Sheet on the SW LED PCB.
4. Fix the SW LED PCB using the Screw. 
5. Attach the PW LED Sheet.
6. Pass the...

7-19
n
 Arranging the SW LED PCB
1. Attach the Power SW PCB Cushion and the two Tape CPU to the PW LED PCB.
2. Bend the PW LED PCB as shown.
3. Connect the Power SW Cable to the Connector on the PW LED PCB.
0~0.5mm
Component side
0~0.5mm
0.5±0.5mm
1±1mm
2±2mm
1±1mm
Foil side
PW LED PCB PW LED PCB Power SW PCB Cushion
Tape CPU
PW LED PCBPW LED PCBWhite line
White line
1
2
Bend
180
Bend
180
Safety Working
PW LED PCB Connector
Power SW Cable
Safety Working 

7-20
n
 Arranging the Power SW Cable
View A
SW LED PCB
Power SW Cable Power SW Cable
Power SW Cable
Ta p e Ta p e
CON Spacer CON Spacer
Top Cabinet
Top Cabinet
CON Spacer
View A
View B
0~2mm
0~2mm
0~0.5mm
3~4mm
0~2mm
View B
0±0.5mm
Set the Cable along a 
connector side, not to prop. Do not put up the Cable on the Cabinet.
Safety Working 

7-21
7.2.8. Setting the IO PCB
1. Fix the IO PCB using the six Screws. No1 to No6
Note: Tighten the Screws in the numbered order (No1 to No6).
Screws : DFHE5058ZB
n  Arrange the IO FPC

:No2

:No3 
:No4 
:No5 
:No6

:No1
IO PCB
Rear I/O FPC Cover Sheet
View B
View A
View AView B

2~3mm R0.5~1.0mmLID SW 
Cushion
IO FPC
R1.5~2.5mm
0±0.3mm
IO FPC
White line
Bend
180
Bend
90White line
LID SW Cushion
LID SW Cushion
White line
White lineIO FPC
White line
White line
1~1.5mm
Bend
180
Bend
90
Bend
90
Bend
90...

7-22
n
 Setting the IO FPC
n  Setting the IO PCB and attaching the Rear I/O FPC Cover 
Sheet
IO PCB IO FPC
FCC CN Stopper
Rear I/O FPC 
Cover Sheet
IO PCB
IO PCB
IO FPC
Rib
LID SW 
Cushion
Slot
Rib
Do not put up the 
IO FPC on the Rib.Do not put up the Rear 
I/O FPC Cover Sheet 
on the Rib.