Panasonic Cf29 Service Manual

							
7-33
7.2.15. Setting the DIMM Cover and Bottom Cover
1. Set the Bottom Cover.
2. Connect the Cable to the Connector (CN12) on the MainPCB. 
3. Fix the Bottom Cover using the eight Screws. No1 to No8
4. Fix the Bottom Cover using the eight Screws. No9 to No16
5. Attach the DIMM Radiation Sheet.
6. Fix the DIMM Cover using the four Screws. No17 to No20
Note: Tighten the Screws in the numbered order (No1 to No20).
Screws : DRQT26+D4FZLT
Screws : DRQT26+D4FZLT
Screws : DRSB3+8FKL
n  Arranging the DIMM Cover and the DIMM Radiation Sheet

:No19

:No20 
:No17

:No18

:No9 
:No10 
:No11

:No12

:No13

:No14
DIMM Cover
DIMM Radiation 
Sheet
Bottom Cover Lock Plate
Main PCBConnector CN12to Connector
(CN12)

:No1

:No2

:No3

:No7

:No8 
:No6

:No5

:No4

:No15

:No16
DIMM Cover
DIMM Cover Spacer
DIMM Cover Spacer DIMM Stopper
DIMM Stopper Spacer
DIMM Radiation Sheet
Sheet
Sheet
View A
View AView B
View B
0~2mm
0~2mm
5±2mm 
						

							
7-34
7.2.16. Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame
1. Connect the three Cables to the three Connectors(CN930, CN950, CN952) on the KBD PCB.
2. Fix the KBD PCB using the two Screws. No1, No2
3. Connect the Cable to the Connector (J2) on the MDC Modem. 
4. Attach the Sheet to the MDC Modem.
5. Fix the MDC Modem using the two Screws. No3, No4
6. Attach the LCD Conductive Sheet and the Gasket to the LCD Cable/MIC Frame.
7. Set the LCD Cable/MIC Frame to the Top Cabinet.
Note: Tighten the Screws in the numbered order (No1 to No4).
Screws : DFHE5025XA
Screws : DFHE5025XA
n  Attaching the Sheet to the MDC Modem
1. Connect the Cable to the Connector (J2) on the MDC Modem.
2. Attach the Sheet to the MDC Modem.

:No1

:No2 
:No3 
:No4
Connector CN950
(front side)
Connector CN930
(reverse side) MDC
ModemSheet
KBD PCB Connector CN952
(reverse side)
to Connector
(CN950)to Connector
(CN952)
LCD Cable/
MIC FrameLCD Conductive
Sheet Gasket
to Connector
(J2)
Connector J2 
(reverse side)
Connector J1 
(reverse side)
to Connector
(CN930)
Top Cabinet
Place the Cable not to 
pass through this range.
View A
View A
3~4mm
5~7mm
Sheet
Cable MDC Modem
Connector (J2)
Sheet
Cable
MDC Modem
Connector (J2)
Safety Working 
						

							
7-35
n
 Arranging the Cables and setting the LCD Cable/MIC Frame
1. Pass the LCD Cable and Antenna Cables through the LCD Cable/MIC Frame.
2. Attach the LCD Conductive Sheet and the Gasket to the LCD Cable/MIC Frame.
3. Set the LCD Cable/MIC Frame to the Top Cabinet.
View AView B
View A
View B
LCD Conductive
Sheet
LCD Conductive
SheetLCD Conductive
Sheet
LCD Cable/MIC 
Frame
LCD Cable and 
Antenna Cable
LCD Cable/MIC 
Frame
LCD Cable/MIC 
Frame
LCD Cable
LCD Cable
Pass the LCD Cable and the two Antenna Cables 
through the LCD Cable/MIC Frame.
Antenna Cables
Gasket
Gasket
Gasket
Antenna Cables
Top Cabinet
Safety Working 
						

							
7-36
7.2.17. Setting the KB Cable Cover, Keyboard and PCMCIA Protector
1. Fix the PCMCIA Protector using the five Screws. No1to No6
2. Connect the two Cables of the Keyboard to the two Con- nectors (CN932, CN933) on the KBD PCB.
3. Set the Keyboard.
4. Fix the KB Cable Cover using the five Screws. No7 to No11
Note: Tighten the Screws in the numbered order (No1 to No11).
Screws : DRHM0002ZA
Screws : DRQT2+I35FKL
n  Arranging the Keyboard
1. Attach the KB Spacer Sheet and the two Gaskets to the Keyboard.

:No7

:No8

:No9 
:No10 
:No11
Keyboard KB PCB
Connector
(CN933)
to Connector
(CN933)
KB Cable Cover
Connector
(CN932)
to Connector
(CN932)

:No1

:No2 
:No3

:No4

:No5

:No6 PCMCIA 
Protector
Keyboard KB Spacer Sheet
KB Spacer 
Sheet
Gasket
0~1mm0~1mm
View A
View B
Gasket
View A
Gasket
0~0.5mm
KB Spacer 
Sheet
View B
Gasket
0~0.5mm 
						

							
7-37
7.2.18. Setting the KB Cover, Hinge Cover L, Hinge Cover R and Keyboard
1. Insert the front hooks of the Keyboard to the Top Cabinetin order, and set the Keyboard.
2. Fix the Hinge Cover L and R using the four Screws. No1 to No4
3. Fix the Hinge Cover L and R using the four Screws. No5 to No8
4. Fix the KB Cover using the four Screws. No9 to No12
Note: Tighten the Screws in the numbered order (No1 to No12).
Screws : DRQT26+D4FZL
Screws : DFHE5054XA
Screws : DFHE5054XA
:No9

:No10 
:No11

:No12 
:No1

:No3

:No2

:No4

:No6

:No7 
:No8

:No5
KB Cover
Front hook Hinge Cover L
Hinge Cover RKeyboard
1
2
3
4
5 
						

							
7-38
7.2.19. Setting the HDD
1. Set the HDD FPC to HDD.
2. Attach the Heater to HDD.
3. Attach the Heater Sheet to the Heater.
4. Attach the two Sheets to HDD.
5. Attach the six HDD Forming MFYPC and the two HDDTerminal Plate Upper to the HDD Damper Ass’y
6. Attach the six HDD Forming MFYPC and the two HDD Terminal Plate Upper to the HDD Damper Ass’y.
7. Set the HDD Damper Ass’y to HDD.
8. Attach the Side Cushion to the HDD L Case Ass’y.
9. Set the HDD U Case Ass’y and the HDD L Case Ass’y, and set the two Tabs of the HDD L Case Ass’y.
10. Fix the HDD U Case Ass’y and the HDD L Case Ass’y using the four Screws.
Screws : DFHE5025XA
n  Attaching the Sheet

 

Heater Sheet
HDD U Case Ass’y
HDD FPC
Heater HDD Terminal
Plate Upper
HDD Terminal
Plate Upper
Side Cushion HDD Forming 
MFYPC
Sheet
Sheet
HDD Forming 
MFYPC
HDD Forming 
MFYPC
HDD U Case Ass’y Ta b Ta b
HDD
HDD 
Damper
Ass’y
Cables
Cables
Heater
HeaterHeaterHeater
Heater
Heater Heater SheetHDD FPC
HDD FPC
HDD FPC
HDD Terminal
HDD FPC
HDD
HDD
Sheet
Sheet
Sheet
Heater Sheet
0~2mm
0~2mm
0~2mm
0~2mm
View DView A
View EView C
View B
View A
View B
View C
View DView E
Sheet
Sheet
Sheet
SheetDo not put the Cables between 
the Heater and the HDD.
Safety Working 
						

							
7-39
7.2.20. Setting the Battery Pack, the HDD Pack and the FDD Pack
1. Set the FDD Pack.
2. Set the HDD Pack.
3. Set the Battery Pack.
MP
Cover
Battery
Cover
HDD Cover
HDD Pack
FDD Pack
Battery Pack 
						

							
CF-29NTQGZBM
8 Exploded View
K74
K75
K73
K17
K409
K68 K25
E45E9
K452
E47
K22
K409
K27
K93 K409
E19
K400
K69K409
K26K99
K70 K4K463
K54
E3
E46
K405
E4
E14
K21
K21
K36
K409K409
K61
K461
K1-11
K1-1
K1-9 K1-6
K1-3
K1-13
K1-14 K1-13
K1-2 K1-2
K1-8
K1-8K1-10
K1
E13
K457
K400
K406
K406
K64
K65
K406
K406
K2
K72
K785
K785
K8
K787
K786
K787
K787
K1-12K1-12
K1-15
A
LLL
B
B
B
B
BB
A
A
A
A
F
V
V
Screw tightening torque
         0.19 _ 0.02 N.m
         (2.0 _ 0.2 kgf.cm)
         0.45 _ 0.05 N.m
         (4.5 _ 0.5 kgf.cm)
         0.49 _ 0.05 N.m
         (5.0 _ 0.5 kgf.cm)
         1.47 _ 0.20 N.m
         (15 _ 2.0 kgf.cm)
         0.18 _ 0.22 N.m
         (2.0 _ 0.2 kgf.cm)
         0.2 _ 0.02 N.m
         (2.0 _ 0.2 kgf.cm)A
B
F
G
I
L +
+
+
+
+
+
+
+ +
+
+ + 
						

							
CF-29NTQGZBM
K2-8
K2-8-7
K2-8-7K2-8-3
K2-8-1
K2-8-2
K2-8-1
K2-22
K2-22
K2-8-7
K2-8-5
K2-8-4K2-8-6K2-31K2-11
K2-11-3
K2-11-1
K2-11-2
K2-11-4
K2-21
K2-21
K2-30
K2-30
K2-5
K2-4
K2-33
K2-14
K2-18
K2-23
K23
K2-22
K2-3
K2-2
K2-1K2-1-3
K2-1-2K2-1-1
K2-26
K2-24
K2
K2-17
K2-15
K2-16
K2-24
K33
K39
K18
K400
K412
K20
K2-13-3
K2-32
K2-12
K2-13
K2-13-2
K2-13-1
K2-13-4
K2-31
K2-12-2
K2-22 K2-12-1
K2-12-5K2-12-4
K2-12-3
K2-7-3
K2-7-1 K2-7-1
K409
K16
K2-9-6 K2-9-5
K2-9-11
K2-9-11 K2-9-1 K2-9-1
K2-22 K2-9-7
K2-22
K2-9-4
K2-9-3
K2-9-8
K2-9
-9
K2-9
K2-9-10
K2-9-9
K410 K40
K32
K34
K35
K410
K41
K410
E48
E49
K31
K2-6-3
K2-6-2
K2-6
K2-22
K2-22 K2-6-1
K2-6-1
K2-10-3
K2-10-2
K2-10-1 K2-10-1
K2-10
K2-27
K2-3
K2-9-2 K2-41
K2-41
K2-42
K866
K2-7-4
K2-9-12
K2-9-12
K2-43
K2-43
K2-10-4
L
B
BB
F
B
BB
B
B
L
P
B
L
LB
B
B
B
B
L
L
A
P
AB
B
B
B
A
A
G
G
B
B
L
Screw tightening torque
        0.19 ± 0.02 N.m
         (2.0 ± 0.2 kgf.cm)
        0.45 ± 0.05 N.m
         (4.5 ± 0.5 kgf.cm)
        0.49 ± 0.05 N.m
         (5.0 ± 0.5 kgf.cm)
        1.47 ± 0.20 N.m
         (15.0 ± 2.0 kgf.cm)
        0.18 ± 0.02 N.m
         (2.0 ± 0.2 kgf.cm)
        0.2 ± 0.02 N.m
         (2.0± 0.2kgf.cm)
        0.8 ± 0.1 N.m
         (8.0 ± 1.0 kgf.cm)A
B
F
G
I
L
P
K2-7-2
K2-7 
						

							
CF-29NTQGZBM
K309E32-03
K306
K304
K308 K313 K303
K304
K316
K313
K311
K305
K311 E32-02
K316
K315E32-01
K314
K311 K310K316
K316
E32
K312
K301
K302
K403
K412
K408 K464
K403
K46
K778
E12
K19
K409
K409 K7
K43
E6
K458 K24
E8E2
E15
K37
K99 K38
K45
K5
E50K83
K80
K450
K52
K460
K462
K6
E7K8
K408 K405
K87
K409
K55
K405
K405 K15
E43K405
K86
K405
K92
K861
K861 K862
K92
K99
E1
K51
K90
K405 K405K861
K406 K406
K7
K783
K2
E44
K465
K81
K52
E41
E42
K773
K405
K770
K51
K784
K7
K858
K859
K405
K860
E789
E790
K405
K405
K863
K864
BT K778
K865
K870
K869K868 K871
K872
K7
K873
K879
K7
N
N
HF
AA
H
A
F
F
E
A
A
A
A
N
N
AA
A
GA
FA
A
A
P
G
G
E
C
A
A
Z
Z
A
A
Y
Y
A
W
W
Screw tightening torque
         0.19 _ 0.02 N.m
         (2.0 _ 0.2 kgf.cm)
         0.216 _ 0.0196 N.m
         (2.2 _ 0.2 kgf.cm)
         0.314 _ 0.0196 N.m
         (3.2 _ 0.2 kgf.cm)
         0.49 _ 0.05 N.m
         (5.0 _ 0.5 kgf.cm)
         0.441 _ 0.049 N.m
         (4.5 _ 0.5 kgf.cm)
         1.47 _ 0.20 N.m
         (15 _ 2.0 kgf.cm)
         1.30 _ 0.17N.m
         (13 _ 2.0 kgf.cm)
         0.18 _ 0.02 N.m
         (2.0 _ 0.2 kgf.cm)
         0.2 _ 0.02 N.m
         (2.0 _ 0.2 kgf.cm)
         0.45 _ 0.03 N.m
         (4.5 _ 0.3 kgf.cm)
         0.8 _ 0.1 N.m
         (8.0 _ 1.0 kgf.cm)A
C
E
F
G
H
I
L
M
N
P
+
+
+
+
+
+
+ +
+
+
+ +
+
+
+
+
+ +
+
+
+
+