Panasonic Cfd1 Owners Manual

11

Setting a Disc 
„
Turn on the computer.
A.	
AC
Press the eject button (A) and slowly pull out the tray.
B.	
Insert/Remove the disc.
C.	
To insert 
•	
Set the disc with the label side up and press the center of the 
disc until it clicks in place.
To remove 
•	
Press on the center spindle (B) and carefully lift up the edge of 
the disc. 
Close the tray. 
D.	
Do not press the eject button.
B
NOTE
To remove a disc when the computer is powered off, insert a pointed object (e.g., the bent-out tip of a...

12
The region code of the drive is not set at purchase. The operation depends on the DVD-Video that is first  
●
played.
DVD-Video with a specific region code: 
•	
The drive will automatically be set at the same region code as the DVD-Video.
DVD-Video with multiple region codes: 
•	
The screen to change the region code appears. Set the region code.
CAUTION
You can change the region code setting up to five times including the initial setting. Be extremely careful  
●
because you cannot change the region...

13
You can read from the following discs.  
●
 
 
 
 
 
 
 
 
 
*1  DVD-RAM: Only non-cartridge type or removable cartridge type can be used.
*2 Does not support DVD-RW Ver.1.0.
Recommended discs for writing
 
●
The quality of written data depends on the disc.
•	
  TAIYO YUDEN Co., Ltd.
•	
  MITSUBISHI KAGAKU MEDIA CO., Ltd.
•	
  MITSUBISHI KAGAKU MEDIA CO., Ltd.
•	
  Panasonic Corporation
•	
 MITSUBISHI KAGAKU MEDIA CO., Ltd.
•	
 TAIYO YUDEN Co., Ltd.
•	
  MITSUBISHI KAGAKU MEDIA CO., Ltd.
•	
 TAIYO...

14
Devices connected to the USB 2.0 ports 
do not operate.Turn off the computer, disconnect it from the cradle, and  
●
then reconnect it to the cradle and turn it on again.
Power can be turned on, however, Win-
dows does not start up normally. Disconnect peripheral devices, such as a USB memory. 
 
●
If disconnecting the peripheral devices can start up Win-
dows, the problem may be with the peripheral devices. 
Contact the manufacturer of such devices.
The computer does not resume (return) 
from sleep...

15
Cannot eject disc. Turn on the computer. 
●
To remove a disc when the computer is  
●
powered off, insert a pointed object (e.g., the 
bent-out tip of a paper clip) into the emergen-
cy hole (A). Pushing it completely to the end 
will free the tray so that it can be pulled out.
A
If a disc with fingerprints or other dirt is used, you may not  
●
be able to remove it. Use a clean disc. ( page 6)
The disc tray does not close.  Do not touch the eject button when closing the tray.
 
●
Other disc operation...

16
Specifications
ItemDescription
Power Supply Input  DC15.6 V (Use the specified AC adaptor supplied with the com-
puter or one sold separately as an accessory.)
Expansion Bus Connector 10 0 - pin
USB 2.0 Port
*1USB 2.0 × 5 (complies with USB 2.0)
Allowable current for each port : 500 mA
USB 2.0 Port (Pass Through)
*1 USB 2.0 × 1 (complies with USB 2.0)
Allowable current for each port : 500 mA
LAN Port IEEE802.3ab 1000BASE-T, IEEE802.3u 100BASE-TX, 
IEEE802.3 10BASE-T (RJ- 45)
HDMI Port
*1*2HDMI × 1 For...

17
Item Description
CD/
DVD 
Drive Continuous 
Data Transfer 
Speed
* 3 *4
Reading*5●DVD - R AM*6:	5X	(Max.)	●DVD-R*7: 8X (Max.) 
●DVD-R	DL:	8X	(Max.)	●DVD-RW:	8X	(Max.)	
●DVD-ROM:	8X	(Max.)	●+R:	8X	(Max.)	●+R	DL:	8X	(Max.)	
●+RW:	8X	(Max.)	●High	Speed	+RW:	8X	(Max.)	
●CD-ROM:	24X	(Max.)	●CD-R:	24X	(Max.)	●CD-RW:	24X	(Max.)	
●High-Speed	CD-RW:	24X	(Max.)	
●Ultra-Speed	CD-RW:	24X	(Max.)
Writing
*8●DVD - R AM*6:	5X	(Max.)	●DVD-R*7: 8X (Max.) 
●DVD-R	DL:	6X	(Max.)	●DVD-RW:	6X	(Max.)	●+R:	8X	(Max.)	
●+R	DL:...

© Panasonic Corporation 2011
パナソニック株式会社　ITプロダクツビジネスユニット
〒570-0021
 大阪府守口市八雲東町一丁目 10
番12
号
Web Site : http://panasonic.net/
PS0811-0
PCE0336A_XP/7 
Panasonic Corporation
Panasonic Solutions Company
3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive Mississauga, Ontario L4W 2T3
Importer’s name & address pursuant to the EU GPSD (General Product Safety Directive) 2001/95/EC Art.5
Panasonic Computer Products Europe, Panasonic Marketing Europe GmbH
Hagenauer Straße 43...