Panasonic Color CCTV Camera Wv Cp310 Installation Guide

							Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.  This illustration represents WV-CP300.
Lens: Option
Installation Guide 
Color CCTV Camera
Model No: WV-CP310, WV-CP314
WV-CP300, WV-CP304
1(29:@87$1@(JOEE





 
						

							
2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL. 

CAUTION

RISK OF ELECTRIC 
SHOCK DO NOT OPEN

The  lightning  flash  with  arrowhead 
symbol, within an equilateral trian-
gle, is intended to alert the user to 
the  presence  of  uninsulated  "dan-
gerous  voltage"  within  the  prod-
uct's  enclosure  that  may  be  of 
sufficient  magnitude  to  constitute 
a risk of electric shock to persons.
The  exclamation  point  within  an 
equilateral  triangle  is  intended  to 
alert  the  user  to  the  presence  of 
important  operating  and  mainte-
nance  (servicing)  instructions  in 
the  literature  accompanying  the 
appliance.
WARNING:
•	To 	 prevent 	 fire 	 or 	 electric 	 shock 	 hazard, 	 do 	 not 	
expose this apparatus to rain or moisture.
•	The
	 apparatus 	 should 	 not 	 be 	 exposed 	 to 	 dripping 	
or splashing and that no objects filled with liquids, 
such  as  vases,  should  be  placed  on  the  appara-
tus.
•	All
	 work 	 related 	 to 	 the 	 installation 	 of 	 this 	 product 	
should  be  made  by  qualified  service  personnel  or 
system installers.
•	To
	 prevent 	 injury, 	 this 	 apparatus 	 must 	 be 	 securely 	
attached  to  the  floor/wall/ceiling  in  accordance 
with the installation instructions.
•	The
	 mains 	 plug 	 or 	 an 	 appliance 	 coupler 	 shall 	
remain readily operable.
•	The
	 installation 	 shall 	 be 	 carried 	 out 	 in 	 accordance 	
with all applicable installation rules.
•	This
	 product 	 has 	 no 	 power 	 switch.
    When  tur ning  off  the  power,  tur n  off  a  Power 
Supply or remove a power cable.
•	The
	 connections 	 should 	 comply 	 with 	 local 	 electri-
cal code.

This Class A digital apparatus complies with 
Canadian ICES-003.

The model number and serial number of this 
product may be found on the surface of the unit.
You should note the model number and serial 
number of this unit in the space provided and 
retain this book as a permanent record of your 
purchase to aid identification in the event of theft.
Model No.
Serial No.

NOTE: This equipment has been tested and found 
to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when the 
equipment is operated in a commercial 
environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not 
installed and used in accordance with the 
instruction manual, may cause harmful 
interference to radio communications.
Operation of this equipment in a residential area is 
likely to cause harmful interference in which case 
the user will be required to correct the interference 
at his own expense.
FCC Caution: To assure continued compliance,
(example - use only shielded interface cables 
when connecting to computer or peripheral 
devices). Any changes or modifications not 
expressly approved by the party responsible for 
compliance could void the user’s authority to 
operate this equipment.

For Canada

For U.S.A

For U.S.A

1(29:@87$1@(JOEE





 
						

							3
  Contents
Important safety instructions ........................................................................\
................................... 4
Limitation of liability  ........................................................................\
................................................. 5
Disclaimer of warranty  ........................................................................\
............................................ 5
Preface  ........................................................................\
................................................................... 6
About notations   ........................................................................\
..................................................... 6
Features  ........................................................................\
................................................................. 6
About the user manuals  ........................................................................\
.......................................... 7
Trademarks and registered trademarks  ........................................................................\
................... 7
Precautions  ........................................................................\
............................................................ 8
Precautions for installation  ........................................................................\
.................................... 10
Major operating controls and their functions  ........................................................................\
......... 12
Installation and connection  ........................................................................\
................................... 13
Setup menu  ........................................................................\
.......................................................... 23
List of setup menu  ........................................................................\
............................................. 23
Basic operation  ........................................................................\
.................................................... 24
Screen transition diagram
CP310
CP310
CP300
........................................................................\
......................... 26
Screen transition diagram
CP310
CP310
CP300........................................................................\
......................... 27
Troubleshooting  ........................................................................\
.................................................... 28
Specifications  ........................................................................\
....................................................... 29
Standard accessories  ........................................................................\
........................................... 30
1(29:@87$1@(JOEE





 
						

							4
Important safety instructions
 1)  Read these instructions.
  2)  Keep these instructions.
  3)  Heed all warnings.
  4)  Follow all instructions.
  5)  Do not use this apparatus near water.
  6)  Clean only with dry cloth.
  7) 
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
 8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other appara-
tus (including amplifiers) that produce heat.
  9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two  blades  with  one  wider  than  the  other.  A  grounding  type  plug  has  two  blades  and  a  third 
grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)  Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs,  convenience 
receptacles, and the point where they exit from the apparatus.
11)  Only use attachments/accessories specified by the manufacturer.
12)  Use  only  with  the  cart,  stand,  tripod,  bracket,  or  table  specified  by  the  manufacturer,  or  sold 
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
S3125A
13) Unplug this apparatus during lightning storms or when unused for long pe\
riods of time.
14)  Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the  apparatus  has 
been  damaged  in  any  way,  such  as  power-supply  cord  or  plug  is  damaged,  liquid  has  been 
spilled  or  objects  have  fallen  into  the  apparatus,  the  apparatus  has  been  exposed  to  rain  or 
moisture, does not operate normally, or has been dropped.
1(29:@87$1@(JOEE





 
						

							5
Limitation of liability
THIS  PUBLICATION  IS  PROVIDED  "AS  IS"  WITHOUT  WARRANTY  OF  ANY  KIND,  EITHER 
EXPRESS  OR  IMPLIED,  INCLUDING  BUT  NOT  LIMITED  TO,  THE  IMPLIED  WARRANTIES  OF 
MERCHANTABILITY,  FITNESS  FOR  ANY  PARTICULAR  PURPOSE,  OR  NON-INFRINGEMENT  OF 
THE THIRD PARTY'S RIGHT.
THIS  PUBLICATION  COULD  INCLUDE  TECHNICAL  INACCURACIES  OR  TYPOGRAPHICAL 
ERRORS.  CHANGES  ARE  ADDED  TO  THE  INFORMATION  HEREIN,  AT  ANY  TIME,  FOR  THE 
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY 
PERSON,  EXCEPT  FOR  REPLACEMENT  OR  REASONABLE  MAINTENANCE  OF  THE  PRODUCT, 
FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
 (1)  ANY  DAMAGE  AND  LOSS,  INCLUDING  WITHOUT  LIMITATION,  DIRECT  OR  INDIRECT, 
SPECIAL,  CONSEQUENTIAL  OR  EXEMPLARY,  ARISING  OUT  OF  OR  RELATING  TO  THE 
PRODUCT;
  (2)  PERSONAL  INJURY  OR  ANY  DAMAGE  CAUSED  BY  INAPPROPRIATE  USE  OR  NEGLIGENT 
OPERATION OF THE USER;
  (3)  UNAUTHORIZED  DISASSEMBLE,  REPAIR  OR  MODIFICATION  OF  THE  PRODUCT  BY  THE 
USER;
  (4)  INCONVENIENCE  OR  ANY  LOSS  ARISING  WHEN  IMAGES  ARE  NOT  DISPLAYED,  DUE  TO 
ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
  (5)  ANY  PROBLEM,  CONSEQUENTIAL  INCONVENIENCE,  OR  LOSS  OR  DAMAGE,  ARISING 
OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
  (6)  ANY  CLAIM  OR  ACTION  FOR  DAMAGES,  BROUGHT  BY  ANY  PERSON  OR  ORGANIZATION 
BEING  A  PHOTOGENIC  SUBJECT,  DUE  TO  VIOLATION  OF  PRIVACY  WITH  THE  RESULT  OF 
THAT  SURVEILLANCE-CAMERA'S  PICTURE,  INCLUDING  SAVED  DATA,  FOR  SOME 
REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE.
Disclaimer of warranty
1(29:@87$1@(JOEE





 
						

							6
Preface
This product is a 1/3-type CCD color CCTV camera. Connection of this product to a video monitor 
allows users to use this product as a monitoring camera. 
• WV-CP310: 120 V AC power supply, with color / black-and-white mode switch function
• WV-CP314: 24 V AC, 12 V DC power supply, with color / black-and-white mode switch function
• WV-CP300: 120 V AC power supply, with easy black-and-white mode switch function
• WV-CP304: 24 V AC, 12 V DC power supply, with easy black-and-white mode switch function
About notations 
The  following  notations  are  used  when  describing  the  functions  limited  for  specific  models.  The 
functions without the notations are supported by all models.
CP310
CP310
CP300
 :The  functions  with  this  notation  are  available  when  using  the  model  WV-CP310  and  
WV-CP314.CP310
CP310
CP300 :The  functions  with  this  notation  are  available  when  using  the  model  WV-CP300  and   
WV-CP304.
Features
Introduction of newly developed high-resolution CCD
The introduction of the newly developed CCD with 976 horizontal pixels has led to a horizontal res-
olution of as high as 650 TV lines. 
High sensitivity achieved because of noise reduction function 
Sensitivity at the following minimum illuminations has been accomplished for color images because 
of the introduction of low noise circuit design (F1.4) : 
0.08 lx (color), 0.008 lx (black-and-white) 
CP310
CP310
CP300
 
0.08 lx (color), 0.05 lx (black-and-white) 
CP310
CP310
CP300 
Day/Night conversion function equipped 
CP310
CP310
CP300
No  setup  change  is  required  at  night  because  the  image  automatically  changes  from  the  color 
mode to the black-and-white mode at low illuminance. 
Bright images can be captured at night because of automatic switching of IR filters at low illumina\
nce.
Motion detection function (VMD) equipped
The motion of an object is detectable. The acts of covering the camera w\
ith a cloth, a cap or other 
acts and changing the camera direction during surveillance can be detected.
1(29:@87$1@(JOEE





 
						

							7
About the user manuals
The  operating  instructions  of  the  camera  consist  of  2  sets:  this  book  and  operating  instructions 
(PDF).
This book explains how to install the camera.
Refer  to  the  "Operating  Instructions  (PDF)"on  the  provided  CD-ROM  for  descriptions  of  how  to 
perform  the  unit  settings.  Adobe
®  Reader®  is  required  to  read  PDF.  When  the  Adobe®  Reader®  is 
not installed on the PC, download the latest Adobe® Reader® from the Adobe web site and install it.
Trademarks and registered trademarks
Adobe,  Acrobat  Reader  and  Reader  are  either  registered  trademarks  or  trademarks  of  Adobe 
Systems Incorporated in the United States and/or othe countries.
Note: 
  •  The VMD function is not the dedicated function to prevent thefts, fires, etc. We are not respon-
sible for any accidents or damages caused by applying the function for t\
he above purposes.
1(29:@87$1@(JOEE





 
						

							8
Precautions
Refer installation work to the dealer.
Installation work requires technique and expe-
riences.  Otherwise  injury  or  damage  to  this 
product may result.
Be sure to consult the dealer.
Do not insert any foreign objects.
This could permanetly damage this product.
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service.
Do not attempt to disassemble or modify 
this product.
Failure  to  observe  this  may  cause  fire  or  elec -
tric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when some -
thing is wrong with this product.
When smoke goes up from this product or
the  smell  of  smoke  comes  from  this  product, 
continued  use  will  result  in  fire,  injury,  or  dam -
age to the product.
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service.
Select an installation area that can support 
the total weight.
Selecting  an  inappropriate  installation  surface 
may  cause  the  product  to  fall  down  or  topple 
over, resulting in injury.
Installation  work  shall  be  started  after  suffi -
cient reinforcement.
Periodic inspections shall be conducted.
Rust  on  the  metal  parts  or  screws  may  cause 
the  product  to  fall  down  resulting  in  injury  or 
accidents.
Consult the dealer for the inspections. This product shall be installed in a vibra
-
tion-free place.
Failure  to  observe  this  may  cause  screws  and 
bolts  to  be  loosened  and  consequently  to  fall 
resulting in injury.
Install this product in a location high 
enough to avoid people and objects from 
bumping the product.
Failure to observe this may cause a drop 
resulting in injury or accidents.
Do not strike or give a strong shock to this 
product.
Failure to observe this may cause injury or fire.
Turn the power off when do wiring of this 
product
.
Failure  to  observe  this  may  cause  electric 
shock.  A  short  circuit  or  wrong  wiring  may 
cause fire.
Do not use this product in an atmosphere 
of flammable gases.
Failure  to  observe  this  may  cause  injury  by 
explosion.
Avoid installing this product in locations 
where it is subject to damage by salt or 
corrosive gas.
Otherwise  the  mounting  fixtures  will  deterio -
rate,  causing  the  product  to  fall  down  and 
leading to accidents.
Tighten screws and mounting fixtures to 
the specified torque.
Failure  to  observe  this  may  cause  a  drop 
resulting in injury or accidents.
1(29:@87$1@(JOEE





 
						

							9
[Precautions for use]
This product is designed to be used indoors.
This product is not operable outdoors.
This product has no power switch.
When  turning  off  the  power,  turn  off  a  circuit 
breaker.
To keep on using with stable performance
Parts of this product may deteriorate and it may 
shorten  the  lifetime  of  this  product  when  using 
in  locations  subject  to  high  temperatures  and 
high  humidity.  (Recommended  operating  tem-
perature: +35 °C {95 °F} or lower)
Do  not  expose  this  product  to  direct  heat 
sources such as a heater.
Handle this product with care.
Do  not  drop  this  product,  nor  apply  shock  or 
vibration to this product.
Failure to observe this may cause trouble.
Noise on monitor 
This  product  is  equipped  with  a  super  sensi -
tive  CCD.  Therefore,  noise  may  appear  on  the 
monitor. This phenomenon is not trouble.
Discoloration on the CCD color filter
W h e n  c o nti nu o u s l y  s h o oti n g  a  b r i g ht  li g ht 
source  such  as  a  spotlight,  the  color  filter  of 
the  CCD  may  have  deteriorated  and  it  may 
cause  discoloration.  Even  when  changing  the 
fixed  shooting  direction  after  continuously 
shooting  a  spotlight  for  a  certain  period,  the 
discoloration may remain. Do not aim this product at strong light 
sources.
A  light  source  such  as  a  spot  light  causes  a 
blooming  (light  bleeding)  or  a  smear  (vertical 
lines).
Blooming
Smear
Bright subject
Cleaning this product body
Turn the power off when cleaning this product. 
Do  not  use  strong  abrasive  detergent  when 
cleaning this product.
Otherwise, it may cause discoloration.
1(29:@87$1@(JOEE





 
						

							10
Precautions for installation
Panasonic  assumes  no  responsibilit y  for 
injuries  or  property  damage  resulting  from 
failures  arising  out  of  improper  installation 
or  operation  inconsistent  with  this  docu-
mentation.
This product is designed to be used 
indoors.
This product is not operable outdoors.
Do  not  expose  the  product  to  direct  sunlight 
for hours and do not install the product near a 
heater  or  an  air  conditioner.  Otherwise,  it  may 
cause  deformation,  discoloration  and  mal -
function.  Keep  the  product  away  from  water 
and moisture.
Installing place
Contact  your  dealer  for  assistance  if  you  are 
unsure of an appropriate place in your particu -
lar environment.
  •  Make sure that the installation area is strong 
enough to hold the product, such as a con -
crete ceiling.
  •  Install  the  camera  in  the  foundation  area  of 
the  architecture  or  where  sufficient  strength 
is assured.
  •  If  a  ceiling  board  such  as  plaster  board  is 
too  weak  to  support  the  total  weight,  the 
area shall be sufficiently reinforced.
Avoid  installing  this  product  in  the  fol -
lowing locations.
  •  Location  where  it  may  get  wet  from  rain  or 
water splash.
  •  Locations  where  a  chemical  agent  is  used 
such as a swimming pool.
  •  Locations  subject  to  steam  and  oil  smoke 
such as a kitchen. 
  •  Locations near flammable gas or vapor.
  •  Locations  where  radiation  or  x-ray  emis -
sions are produced.
  •  Locations where corrosive gas is produced, 
Locations  where  it  may  be  damaged  by 
briny air such as seashores.  
•  Locations  where  the  temperature  is  not 
within –10 °C to +50 °C {14 °F to 122 °F} .
  •  Locations subject to vibrations (This prod -
uct is not designed for on-vehicle use.)
  •  Locations  subject  to  condensation  as  the 
result of severe changes in temperature. 
Avoid  moist  or  dusty  places  to  install  this 
system.
Otherwise, lifetime of the internal parts may be 
shortened.
Avoid installing this product in a place with 
a high level of noise.
Installation  near  an  air  conditioner,  an  air 
cleaner, a vending machine, or the like causes 
noise.
Avoid  installing  and  connecting  during  a 
lightning  storm.  Otherwise,  an  electric 
shock or fire may be caused.
Be sure to remove this product if it is not in 
use.
Do not damage the power plug or cable.
Keep  the  camera  cable  away  from  the 
lighting cable.
Failure to observe this may cause noise.
Radio interference
When  the  camera  is  used  near  T V/radio 
antenna,  strong  electric  field  or  magnetic  field 
(near  a  motor  or  a  transformer),  images  may 
be  distorted  and  noise  sound  may  be  pro -
duced.  In  such  a  case,  run  the  camera  cable 
through specialized steel conduit tubes.
1(29:@87$1@(JOEE