Panasonic Color CCTV Camera Wv Cp600 WV CP620 WV CP604E WV CP624E Series Installation Guide

							Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual. 
This illustration represents WV-CP600/G.
Lens: Option
Installation Guide 
Color CCTV Camera
Model No: WV-CP620/G, WV-CP624E 
WV-CP600/G, WV-CP604E
WV-CP600 
						

							2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning flash with arrowhead  symbol, within an equilateral trian-gle, is intended to alert the user to the presence of uninsulated "dan-gerous voltage" within the prod-uct's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 
The exclamation point within an  equilateral triangle is intended to alert the user to the presence of important operating and mainte-nance (servicing) instructions in the literature accompanying the appliance.
WARNING:
•	To	prevent	fire	or	electric	shock	hazard,	do	not	expose this apparatus to rain or moisture.•	The	apparatus	should	not	be	exposed	to	dripping	or splashing and that no objects filled with  liquids, such as vases, should be placed on the apparatus.•	All	work	related	to	the	installation	of	this	product	should be made by qualified service personnel or system installers.•	To	prevent	injury,	this	apparatus	must	be	securely	attached to the floor/wall/ceiling in accordance with the installation instructions.•	The	mains	plug	or	an	appliance	coupler	shall	remain readily operable.•	The	installation	shall	be	carried	out	in	accordance	with all applicable installation rules.•	This	product	has	no	power	switch. When turning off the power, turn off a Power Supply or remove a power cable.•	The	connections	should	comply	with	local	electrical code.
We declare under our sole responsibility that the  product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med de standarder eller andra normativa dokument som framställs i direktiv nr 2006/95/EC och 2004/108/EC.
Wij verklaren als enige aansprakelijke, dat het product waarop	deze	verklaring	betrekking	heeft,	voldoet	aan	de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 2006/95/EC en 2004/108/EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 2006/95/ EC ja 2004/108/EC säädöksiä.
Vi erklærer os eneansvarlige for, at dette produkt,  som denne deklaration omhandler, er i overensstemmelse med standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 2006/95/EC og 2004/108/EC.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktivene 2006/95/EC og 2004/108/EC. 
						

							3
  Contents
Important safety instructions ...........................................................................................................4
Limitation of liability .........................................................................................................................5
Disclaimer of warranty ....................................................................................................................5
Preface ...........................................................................................................................................6
About notations  .............................................................................................................................6
Features .........................................................................................................................................6
About the user manuals ..................................................................................................................7
Trademarks and registered trademarks ...........................................................................................7
Precautions ....................................................................................................................................8
Precautions for installation ............................................................................................................10
Major operating controls and their functions .................................................................................12
Installation and connection ...........................................................................................................13
Setup menu ..................................................................................................................................23
List of setup menu .....................................................................................................................23
Basic operation ............................................................................................................................24
Screen transition diagram CP620
CP620
CP600
................................................................................................26
Screen transition diagram 
CP620
CP620
CP600................................................................................................27
Troubleshooting ............................................................................................................................28
Specifications ...............................................................................................................................29
Standard accessories ...................................................................................................................30 
						

							4
Important safety instructions
 1) Read these instructions.
 2) Keep these instructions.
 3) Heed all warnings.
 4) Follow all instructions.
 5) Do not use this apparatus near water.
 6) Clean only with dry cloth.
 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc- 
tions.
 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara-
tus (including amplifiers) that produce heat.
 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold 
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
S3125A
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped. 
						

							5
Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF 
THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL 
ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE 
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). 
IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY  
PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, 
FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
 (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, 
SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE 
PRODUCT;
 (2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT 
OPERATION OF THE USER;
 (3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE 
USER;
 (4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO 
ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
 (5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING 
OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
 (6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION 
BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF 
THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME 
REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE.
Disclaimer of warranty 
						

							6
Preface
This product is a 1/3-type CCD color CCTV camera. Connection of this product to a video monitor  
allows users to use this product as a monitoring camera. 
• WV-CP620/G: 220 - 240 V AC power supply, with color/black-and-white mode switch function
• WV-CP624E: 24 V AC, 12 V DC power supply, with color/black-and-white mode switch function
• WV-CP600/G: 220 - 240 V AC power supply, with easy black-and-white mode switch function
• WV-CP604E: 24 V AC, 12 V DC power supply, with easy black-and-white mode switch function
About notations 
The  following  notations  are  used  when  describing  the  functions  limited  for  specific  models.  The 
functions without the notations are supported by all models.CP620
CP620
CP600
 :The  functions  with  this  notation  are  available  when  using  the  model  WV-CP620/G  and  
WV-CP624E.
CP620
CP620
CP600 :The  functions  with  this  notation  are  available  when  using  the  model  WV-CP600/G  and  
WV-CP604E.
Features
Introduction of newly developed high-resolution CCD 
The  introduction  of  the  newly  developed  CCD  with  976  horizontal  pixels  has  led  to  a  horizontal  
resolution of as high as 650 TV lines.  
Super Dynamic 6 (SUPER-D6) 
For  photographic  subjects  which  contain  high  contrast  between  the  bright  and  dark  areas,  light  
compensation on the pixel level will result in more natural-looking images. 
High sensitivity achieved because of noise reduction function  
Sensitivity at the following minimum illuminations has been accomplished for color images because  
of the introduction of low noise circuit design (F1.4): 
0.08 lx (color), 0.008 lx (black-and-white) CP620
CP620
CP600
 
0.08 lx (color), 0.05 lx (black-and-white) 
CP620
CP620
CP600 
Day/Night conversion function equipped CP620
CP620
CP600No  setup  change  is  required  at  night  because  the  image  automatically  changes  from  the  color 
mode to the black-and-white mode at low illuminance. 
Bright  images  can  be  captured  at  night  because  of  automatic  switching  of  IR  filters  at  low 
illuminance. 
						

							7
About the user manuals
The operating instructions of the camera consist of 2 sets: this book and operating instructions  
(PDF).
This book explains how to install the camera.
Refer to the "Operating Instructions (PDF)"on the provided CD-ROM for descriptions of how to 
perform the unit settings. Adobe® Reader® is required to read PDF. When the Adobe® Reader® is 
not installed on the PC, download the latest Adobe® Reader® from the Adobe web site and install it.
Trademarks and registered trademarks
Adobe, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe 
Systems Incorporated in the United States and/or othe countries.
Motion detection function (VMD) equipped 
The motion of an object is detectable. The acts of covering the camera with a cloth, a cap or other  
acts and changing the camera direction during surveillance can be detected.
Note: 
 • The  VMD  function  is  not  the  dedicated  function  to  prevent  thefts,  fires,  etc.  We  are  not 
responsible for any accidents or damages caused by applying the function for the above  
purposes. 
						

							8
Precautions
Refer installation work to the dealer. 
Installation work requires technique and  
experiences. Other wise injury or damage to 
this product may result.
Be sure to consult the dealer. 
Do not insert any foreign objects. 
This could permanetly damage this product. 
Turn the power off immediately and contact 
qualified service personnel for service. 
Do not attempt to disassemble or modify  
this product. 
Failure to observe this may cause fire or  
electric shock.
Consult the dealer for the repair or inspections. 
Stop operation immediately when  
something is wrong with this product. 
When smoke goes up from this product or 
the smell of smoke comes from this product, 
continued use will result in fire, injury, or 
damage to the product.
Turn the power off immediately and contact 
qualified service personnel for service. 
Select an installation area that can support  
the total weight. 
Selecting an inappropriate installation surface  
may cause the product to fall down or topple 
over, resulting in injury.
Installation work shall be started after 
sufficient reinforcement. 
Periodic inspections shall be conducted. 
Rust on the metal parts or screws may cause  
the product to fall down resulting in injury or 
accidents. 
Consult the dealer for the inspections.
This product shall be installed in a  
vibration-free place. 
Failure to observe this may cause screws and  
bolts to be loosened and consequently to fall 
resulting in injury. 
Install this product in a location high  
enough to avoid people and objects from 
bumping the product. 
Failure to observe this may cause a drop  
resulting in injury or accidents. 
Do not strike or give a strong shock to this  
product. 
Failure to observe this may cause injury or fire. 
Turn the power off when do wiring of this  
product.
Failure to observe this may cause electric  
shock. A short circuit or wrong wiring may 
cause fire. 
Do not use this product in an atmosphere  
of flammable gases. 
Failure to observe this may cause injury by  
explosion. 
Avoid installing this product in locations  
where it is subject to damage by salt or  
corrosive gas. 
Other wise the mounting fixtures will deterio-
rate, causing the product to fall down and  
leading to accidents. 
Tighten screws and mounting fixtures to  
the specified torque. 
Failure to observe this may cause a drop  
resulting in injury or accidents. 
						

							9
[Precautions for use] 
This product is designed to be used indoors. 
This product is not operable outdoors. 
This product has no power switch. 
When turning off the power, turn off a circuit  
b r e a k e r. 
To keep on using with stable performance 
Parts of this product may deteriorate and it  
may shorten the lifetime of this product when 
using in locations subject to high temperatures 
and high humidity. (Recommended operating 
temperature: +35 °C or lower)
Do not expose this product to direct heat 
sources such as a heater. 
Handle this product with care. 
Do not drop this product, nor apply shock or  
vibration to this product.
Failure to observe this may cause trouble. 
Noise on monitor  
This product is equipped with a super  
sensitive CCD. Therefore, noise may appear 
on the monitor. This phenomenon is not 
trouble. 
Discoloration on the CCD color filter 
When continuously shooting a bright light  
source such as a spotlight, the color filter of 
the CCD may have deteriorated and it may 
cause discoloration. Even when changing the 
fixed shooting direction after continuously 
shooting a spotlight for a certain period, the 
discoloration may remain.
Do not aim this product at strong light 
sources. 
A light source such as a spot light causes a  
blooming (light bleeding) or a smear (vertical 
lines).
Blooming
SmearBright subject
Cleaning this product body 
Turn the power off when cleaning this  
product. Do not use strong abrasive detergent 
when cleaning this product. Other wise, it may 
cause discoloration. 
Synchronous mode setting 
Image synchronous mode of this camera  
indicates internal synchronization (INT) only.
Set the multiplexed vertical drive ( VD2) as OFF 
when the camera is connected to the system 
controller of the company. 
						

							10
Precautions for installation
Panasonic assumes no responsibility for  
injuries or property damage resulting from 
failures arising out of improper installation 
or operation inconsistent with this 
documentation. 
This product is designed to be used  
indoors. 
This product is not operable outdoors. 
Do not expose the product to direct sunlight 
for hours and do not install the product near a 
heater or an air conditioner. Other wise, it may 
cause deformation, discoloration and 
malfunction. Keep the product away from 
water and moisture.
Installing place
Contact your dealer for assistance if you are 
unsure of an appropriate place in your particu-
lar environment. 
 • Make sure that the installation area is strong  
enough to hold the product, such as a 
concrete ceiling.
 • Install  the  camera  in  the  foundation  area  of 
the architecture or where sufficient strength 
is assured.
 • If  a  ceiling  board  such  as  plaster  board  is 
too weak to support the total weight, the  
area shall be sufficiently reinforced.
Avoid installing this product in the  
following locations.
 • Location  where  it  may  get  wet  from  rain  or  
water splash.
 • Locations  where  a  chemical  agent  is  used 
such as a swimming pool.
 • Locations  subject  to  steam  and  oil  smoke 
such as a kitchen. 
 • Locations near flammable gas or vapor.
 • Locations  where  radiation  or  x-ray 
emissions are produced.
 • Locations where corrosive gas is produced, 
Locations where it may be damaged by 
briny air such as seashores.
 • Locations  where  the  temperature  is  not 
within –10 °C to +50 °C.
 • Locations  subject  to  vibrations  ( This 
product is not designed for on-vehicle 
use.)
 • Locations  subject  to  condensation  as  the 
result of severe changes in temperature. 
Avoid moist or dusty places to install this 
system. 
Other wise, lifetime of the internal parts may  
be shortened. 
Avoid installing this product in a place with  
a high level of noise. 
Installation near an air conditioner, an air  
cleaner, a vending machine, or the like causes 
noise. 
Avoid installing and connecting during a  
lightning storm. Otherwise, an electric 
shock or fire may be caused. 
Be sure to remove this product if it is not in  
use. 
Do not damage the power plug or cable.
Keep the camera cable away from the  
lighting cable. 
Failure to observe this may cause noise.
Radio interference
When the camera is used near T V/radio  
antenna, strong electric field or magnetic field 
(near a motor or a transformer), images may 
be distorted and noise sound may be 
produced. In such a case, run the camera 
cable through specialized steel conduit tubes.