Panasonic Color CCTV Camera Wv Cw590 Wv Cw594 Installation Guide

							Before attempting to connect or operate this product,
p\fease read these instructions carefu\f\fy and save this manua\f for future use.
\bhe mode\f number is abbreviated in some descriptions in this manua\f.
Installation Guide
Color CCTV Camera
Mode\f No. WV-CW590/GWV-CW594E 
						

							2
WARNING:
•  \bhis apparatus must\, be earthed.
•   Apparatus  sha\f\f  be  connected  to  a  mains  socket  out\fet   
 with a protective earthing connection.
•   \bhe  mains  p\fug  or  an  app\fiance  coup\fer  sha\f\f  remain   
 readi\fy operab\fe.
•  
A\f\f  work  re\fated  to  the  insta\f\fation  of  this  product  shou\fd   be  made  by  qua\fified  service  personne\f  or  system 
 insta\f\fers.
•   F o r   P E R M A N E N \b LY   C O N N E C \b E D   A P PA R A\b U S   
  provided  neither  with  an  a\f\f-po\fe  MAINS  SWI\bCH  nor  an    
 a\f\f-a\f\f po\fe circuit breaker, the insta\f\fation sha\f\f be carried   
 out in accordance with a\f\f app\ficab\fe insta\f\fation ru\fes.
•  
\bhe connections shou\fd comp\fy with \foca\f e\fectrica\f code.
\bhe \fightning f\fash \,with arrowhead 
symbo\f, within an eq\,ui\fatera\f triang\fe, \,
is intended to a\fer\,t the user to the \,
presence of uninsu\fat\,ed "dangerous 
vo\ftage" within the \,product's enc\fosure
that may be of suf\,ficient magnitude \,to 
constitute a risk \,of e\fectric shock t\,o 
persons.
\bhe exc\famation poi\,nt within an 
equi\fatera\f triang\fe\, is intended to a\fe\,rt 
the user to the pr\,esence of important 
operating and main\,tenance (servicing)\, 
instructions in th\,e \fiterature 
accompanying the a\,pp\fiance.
\burn the power off at the mains to \,disconnect the mai\,n 
power for a\f\f unit.
FOR YOUR SAFETY PL\HEASE READ THE FOLLO\HWING 
TE\fT CAREFULLY.
WARNING: Th\bs apparatus must\H be earthed. IMPORTANT
\bhe wires in this mains \fead are co\foured in accordance with 
the fo\f\fowing code.
  Green-and-ye\f\fow:  Earth
  B\fue:    Neutra\f
  Brown:    Live
  As  the  co\fours  of  the  wire  in  the  mains  \fead  of  this 
app\fiance  may  not  correspond  with  the  co\foured  markings 
identifying the te\,rmina\fs in your p\fug\,, proceed as fo\f\fows.
  \bhe  wire  which  is  co\foured  green-and-yellow  must  be 
connected  to  the  termina\f  in  the  p\fug  which  is  marked  with 
the  \fetter  E  or  by  the  earth  symbo\f 
  or  co\foured  green  or 
green-and-yellow.
  \bhe wire which is co\foured blue must be connected\, to the 
termina\f  in  the  p\fug  which  is  marked  with  the  \fetter  N  or 
co\foured black.
  \bhe  wire  which  is  co\foured  brown  must  be  connected  to 
the  termina\f  in  the  p\fug  which  is  marked  with  the  \fetter  L  or 
co\foured red.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMO\fE CO\fER (OR BACK)\b
NO USER-SER\fICEABLE PARTS INSIDE\b  
REFER SER\fICING TO QUALIFIED SER\fICE PERSONNEL\b
CAU\bION
RISK OF ELECTRIC  
SHOCK DO NOT OPEN
CAUTION:
•  
An  ALL-POLE  MAINS  SWI\bCH  with  a  contact  separation 
of  at  \feast  3  mm  in  each  po\fe  sha\f\f  be  incorporated  in 
the e\fectrica\f inst\,a\f\fation of the bui\,\fding.
Wir erk\fären in a\f\feiniger Verantwortung, daß das Produkt, auf das 
sich  diese  Erk\färung  bezieht,  mit  den  fo\fgenden  Normen  oder 
n o r m a t i v e n   D o k u m e n t e n   ü b e r e i n s t i m m t .   G e m ä ß   d e n 
Bestimmungen der R\,icht\finie 2006/95/E\,C und 2004/108/EC.
Nosotros  dec\faramos  bajo  nuestra  única  responsabi\fidad  que  e\f 
producto  a  que  hace  referencia  esta  dec\faración  está  conforme 
con  \fas  normas  u  otros  documentos  normativos  siguiendo  \fas 
estipu\faciones de \f\,as directivas 2006/95/CE \,y 2004/108/CE.
Nous  déc\farons  sous  notre  propre  responsabi\fité  que  \fe  produit 
auque\f  se  réfère  \fa  présente  déc\faration  est  conforme  aux  normes 
spécifiées  ou  à  tout  autre  document  normatif  conformément  aux 
dispositions des directives 2006/95/CE et 2004/108/CE.
Noi  dichiariamo  sotto  nostra  esc\fusiva  responsabi\fità  che  i\f 
prodotto a cui si riferisce \fa presente dichiarazione risu\fta conforme 
ai  seguenti  standard  o  a\ftri  documenti  normativi  conformi  a\f\fe 
disposizioni de\f\fe direttive 2006/95/CE e 2004/108/CE.
Wij  verk\faren  a\fs  enige  aansprake\fijke,  dat  het  product  waarop 
deze  verk\faring  betrekking  heeft,  vo\fdoet  aan  de  vo\fgende 
normen  of  andere  normatieve  documenten,  overeenkomstig  de 
bepa\fingen van Rich\,t\fijnen 2006/95/EC \,en 2004/108/EC.
Vi  erk\færer  os  eneansvar\fige  for,  at  dette  produkt,  som  denne 
dek\faration  omhand\fer,  er  i  overensstemme\fse  med  standarder 
e\f\fer  andre  nor mative  dokumenter  i  fø\fge  bestemme\fser ne  i 
direktivene 2006/95/EC\, og 2004/108/EC.
I\fmoitamme  yksinomaise\f\fa  vastuu\f\famme,  että  tuote,  jota  tämä 
i\fmoitus  koskee,  noudattaa  seuraavia  standardeja  tai  muita 
ohjee\f\fisia  asiakirjoja,  jotka  noudattavat  direktiivien  2006/95/EC  ja 
2004/108/EC säädök\,siä.
Vi dek\farerar härmed vårt fu\f\fa ansvar för att den produkt ti\f\f vi\fken 
denna  dek\faration  hänvisar  är  i  överensstämme\fse  med  de 
standarder  e\f\fer  andra  nor mativa  dokument  som  framstä\f\fs  i 
direktiv nr 2006/95/EC\, och 2004/108/EC.
Vi  erk\færer  oss  a\fene  ansvar\fige  for  at  produktet  som  denne 
erk\færingen  gje\fder  for,  er  i  overensstemme\fse  med  fø\fgende 
n o r m e r   e \f \f e r   a n d r e   n o r m g i v e n d e   d o k u m e n t e r   s o m   f ø \f g e r 
bestemme\fsene i dir\,ektivene 2006/95/EC\, og 2004/108/EC.
We dec\fare under our so\fe responsibi\fity that the product to which 
this dec\faration re\fates is in conformity with the standards or other 
nor mative  documents  fo\f\fowing  the  provisions  of  Directives 
2006/95/EC and 200\,4/108/EC. 
						

							3
Contents
Important safety instru\,ctions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Limitation of \fiabi\,\fity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Disc\faimer of warran\,ty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About the user man\,ua\fs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
\brademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Major operating co\,ntro\fs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Precautions for inst\,a\f\fation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
DIP switch settings\,   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■ Communication Par\,ameters (DIP Switch\, 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■ Unit Number (DIP \,Switch 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
■ RS485 Communicati\,on Parameters (DIP\, Switch 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Insta\f\fation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■ Mounting the Came\,ra  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connections   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
\broub\feshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Standard accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Optiona\f accessorie\,s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 
						

							4
Important safety i\unstru\ftions
 1)  Read these instruc\,tions.
  2)  Keep these instruc\,tions.
  3)  Heed a\f\f warnings.
  4)  Fo\f\fow a\f\f instructio\,ns.
  5)  C\fean on\fy with dry c\foth.
  6)  Do not b\fock any ve\,nti\fation openings.\, Insta\f\f in accordance with the manu\,facturer's instructions.
  7)  Do  not  insta\f\f  near  any  heat  sources  such  as  radiators,  heat  registers,  stoves,  or  other  apparatus  (inc\fuding 
amp\fifiers) that pr\,oduce heat.
  8)  Do not defeat the safety purpose of the po\farized or grounding-type p\fug. A po\farized p\fug has two b\fades with 
one wider than the other. A grounding type p\fug has two b\fades and a third grounding prong. \bhe wide b\fade or 
the  third  prong  are  provided  for  your  safety.  If  the  provided  p\fug  does  not  fit  into  your  out\fet,  consu\ft  an 
e\fectrician for rep\facement of the o\,bso\fete out\fet.
  9)  Protect the power cord from being wa\fked on or pinched particu\far\fy at p\fugs, convenience receptac\fes, and the 
point where they exit from the apparatus.
  10)  On\fy use attachment\,s/accessories spec\,ified by the manuf\,acturer.
 
11)  Use on\fy with the cart, stand, tripod, bracket, or tab\fe specified by the manufacturer, or so\fd with the apparatus. 
When a cart is used, use caut\,ion when moving the \,cart/apparatus combin\,ation to avoid inju\,ry from tip-over.
 
12)  Unp\fug this apparat\,us during \fightning\, storms or when unused f\,or \fong periods of \,time.
S3125A 
						

							5
Limitation of liabi\ulity
\bHIS  PUBLICA\bION  IS  PROVIDED  "AS  IS"  WI\bHOU\b  WARRAN\bY  OF  ANY  KIND,  EI\bHER  EXPRESS  OR  IMPLIED, 
INCLUDING  BU\b  NO\b  LIMI\bED  \bO,  \bHE  IMPLIED  WARRAN\bIES  OF  MERCHAN\bABILI\bY,  FI\bNESS  FOR  ANY 
PAR\bICULAR PURPOSE, OR\, NON-INFRINGEMEN\b O\,F \bHE \bHIRD PAR\bY'S RIGH\b.
Prefa\fe
IN  NO  EVEN\b  SHALL  Panasonic  System  Networks  Co.,  Ltd.BE  LIABLE  \bO  ANY  PAR\bY  OR  ANY  PERSON,  EXCEP\b 
FOR REPLACEMEN\b OR REASONABLE MAIN\bENANCE OF \bHE PRODUC\b, FOR \bHE CASES, INCLUDING BU\b NO\b 
LIMI\bED \bO BELOW:
(1)  A N Y   D A M A G E   A N D   L O S S ,   I N C L U D I N G   W I \b H O U \b   L I M I \bA\b I O N ,   D I R E C \b   O R   I N D I R E C \b,   S P E C I A L , 
 CONSEQUEN\bIAL OR E\,XEMPLARY, ARISING OU\b OF OR\, RELA\bING \bO \bHE PRODUC\b;
(2)   PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIA\bE USE OR NEGLIGEN\b OPERA\bION OF \bHE   
 USER;
(3) UNAU\bHORIZED DI\,SASSEMBLE, REPAIR OR MODIFICA\bION OF \bHE PRODUC\b \,BY \bHE USER;
(4)   INCONVENIENCE  OR  ANY  LOSS  ARISING  WHEN  IMAGES  ARE  NO\b  DISPLAYED,  DUE  \bO  ANY  REASON  OR 
 CAUSE INCLUDING A\,NY FAILURE OR PROBLEM \,OF \bHE PRODUC\b;
(5)   ANY  PROBLEM,  CONSEQUEN\bIAL  INCONVENIENCE,  OR  LOSS  OR  DAMAGE,  ARISING  OU\b  OF  \bHE  SYS\bEM 
 COMBINED BY \bHE DE\,VICES OF \bHIRD PAR\bY;
(6)   ANY CLAIM OR AC\bION FOR DAMAGES, BROUGH\b BY ANY PERSON OR ORGANIZA\bION BEING A PHO\bOGENIC  
 SUBJEC\b,  DUE  \bO  VIOLA\bION  OF  PRIVACY  WI\bH  \bHE  RESUL\b  OF  \bHA\b  SURVEILLANCE-CAMERA'S  PIC\bURE, 
 INCLUDING SAVED DA\bA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE;
(7) LOSS OF REGIS\bE\,RED DA\bA CAUSED BY ANY FAILURE. \bHIS  PUBLICA\bION  COULD  INCLUDE  \bECHNICAL  INACCURACIES  OR  \bYPOGRAPHICAL  ERRORS.  CHANGES 
ARE  ADDED  \bO  \bHE  INFORMA\bION  HEREIN,  A\b  ANY  \bIME,  FOR  \bHE  IMPROVEMEN\bS  OF  \bHIS  PUBLICA\bION 
AND/OR \bHE CORRESPO\,NDING PRODUC\b (S).
\bhis co\for CC\bV camera is a video survei\f\fance device that incorporates a ¼-type CCD, a 36x zoom \fens, preset and 
pan and ti\ft capabi\,\fities in a dome co\,nfiguration.
\bis\flaimer of warra\unty 
						

							6
Super Dynam\bc 6 (SUPER-D6)
S U P E R - D 6   c a n   c a p t u re   c \f e a r   i m a g e s   o f   s u b j e c t s 
whose i\f\fumination i\,s extreme\fy different. 
New DSP for h\bgh sens\bt\bv\bty
A  new  noise  reduction  system  \fowers  minimum  i\f\fumi-
nance  to  0.5  \fx  in  the  co\for  mode  and  0.04  \fx  in  the 
b\fack-and-white mode\,. 
Auto n\bght t\bme sw\btch\bng to black-
and-wh\bte mode 
\bhe  camera  can  be  configured  to  switch  to  the  b\fack-
and-white  mode  automatica\f\fy  under  \fow  \fight  condi -
tions for c\fear ima\,ges, even at night. \,
D\bg\btal fl\bp 
Nor ma\f\fy,  a  camera  needs  to  stop  when  it  points 
straight  down  during  a  ti\ft  operation.  With  digita\f  f\fip, 
however,  the  camera  is  ab\fe  to  ti\ft  from  0°  to  180°  in  a 
sing\fe  motion.  \bhis  makes  it  possib\fe  to  track  subjects 
passing direct\fy under the cam\,era more smooth\fy. 
Pr\bvacy zone funct\bon 
\bhe  privacy  zone  function  can  mask  specific  areas  of 
the scene from view. 
Patrol funct\bon 
\bhe  patro\f  function  can  store  manua\f  camera  move -
ment  routines  for  automatic  p\fayback.  For  examp\fe, 
you  can  set  the  camera  the  movements  of  the  peop\fe 
to  be  monitored,  by  rep\faying  the  stored  parameters 
comp\ficated movemen\,ts are done automatica\f\f\,y. 
Camera pos\bt\bon memory
\bhe  system  can  be  configured  with  up  to  256  camera 
positions. A particu\far camera position can be se\fected 
and  viewed  by  entering  the  app\ficab\fe  preset  number 
on the system cont\,ro\f\fer 10-key pad. 
Mot\bon detect\bon 
\bhe  system  can  be  configured  so  any  motion  on  the 
monitor screen during survei\f\fance causes output of an 
a\farm signa\f. 
Internal heat\bng fan 
Prevents  snow  and  frost  from  bui\fding  up  on  the  dome 
cover.*1
Waterproof\bng spec\bf\bcat\bons 
O u t d o o r   e n c \f o s u re   b a s e d   o n   I P 6 6 *2  o f   I E C 6 0 5 2 9 
standard.
*1 
 Does  not  operate  in  environments  with  ambient  
 temperatures under -50 °C. In environments over -50 °C
 
 defrosting may not function if wind and snow are too   
 strong. Use it with the power on continuous\fy to keep   
 the temperature inside the camer\,a over -10 
°C.
*2   Waterproof  structure  resistant  to  powerfu\f  jetting  as 
 c\fassified by the \,Internationa\f Protection code.
Features
About the user manua\uls
Trademarks and reg\uistered trademarks\u
    Tilting 
    downwards.      The picture is \u\flipped 
    when the camer\ua is 
    pointing strai\ught down 
    (at around 1\b5°)\u.      Tilting upwards\u.
 Digital \flip is per\formed only when the system controller joystick is held downwards. 
Digital Flip Operat\uion
\bhe  operating  instructions  of  the  camera  consist  of  2 
sets: this book an\,d operating instru\,ctions (PDF).
\bhis book exp\fains \,how to insta\f\f the c\,amera.
Refer  to  the  "Operating  Instructions  (PDF)"  on  the  pro-
vided  CD-ROM  for  descriptions  of  how  to  perform  the  unit  settings.  Adobe®  Reader®  is  required  to  read  PDF. 
When  the  Adobe®  Reader®  is  not  insta\f\fed  on  the  PC, 
down\foad  the  \fatest  Adobe®  Reader®  from  the  Adobe 
web site and insta\f\f\, it.
Adobe and Reader are either registered trademarks or 
trademarks  of  Adobe  Systems  Incorporated  in  the 
United States and/\,or other countries\,. 
						

							7
Pre\fautions
The follow\bng po\bnts\H as well as the con\Htents of "Warn\bng" \H
and "Caut\bon" shall\H be observed.
Refer \bnstallat\bon \Hwork to the dealer.\H
Insta\f\fation  work  requires  technique  and  experiences. 
Otherwise injury, or damage to this\, product may resu\ft. 
Be sure to consu\ft the de\,a\fer. 
Do not \bnsert any f\Hore\bgn objects.
\bhis  cou\fd  permanet\fy  damage  this  product.  \burn  the 
power  off  immediate\fy  and  contact  qua\fified  service 
personne\f for servi\,ce.
Do not attempt to \Hd\bsassemble or mod\bf\Hy th\bs 
product.
Fai\fure to observe this m\,ay cause fire or e\fectric shock\,.
Consu\ft the dea\fer \,for the repair or inspectio\,ns.
Stop operat\bon \bmme\Hd\bately when someth\b\Hng \bs 
wrong w\bth th\bs prod\Huct. 
When  smoke  goes  up  from  this  product  or  the  sme\f\f 
of  smoke  comes  from  this  product,  continued  use  wi\f\f 
resu\ft in fire, injury, or damage to the \,product. 
\burn  the  power  off  immediate\fy  and  contact  qua\fified 
service personne\f f\,or service. 
Select an \bnstallat\H\bon area that can s\Hupport the total 
we\bght. 
Se\fecting  an  inappropriate  insta\f\fation  sur face  may 
cause  the  product  to  fa\f\f  down  or  topp\fe  over,  resu\fting 
in injury. 
I n s t a \f \f a t i o n   w o r k   s h a \f \f   b e   s t a r t e d   a f t e r   s u f f i c i e n t 
reinforcement. 
Per\bod\bc \bnspect\bons\H shall be conducted.\H
R u s t   o n   t h e   m e t a \f   p a r t s   o r   s c re w s   m a y   c a u s e   t h e 
product to fa\f\f down r\,esu\fting in injury or accidents.
Consu\ft the dea\fer \,for the inspection\,s. Do not damage the p\Hower cable.
Do  not  damage,  fabricate,  twist,  stretch,  bund\fe,  or 
forcib\fy  bend  the  power  cab\fe.  Do  not  p\face  heavy 
objects. Keep away f\,rom heat sources.
Use  of  the  damaged  power  cab\fe  may  cause  e\fectric 
shock, short circuit, or fire. 
Consu\ft the dea\fer \,for repair.
Do not \bnstall th\bs \Hproduct on a place\H that \bs greatly 
\bnfluenced by w\bnd.
Insta\f\fation on a p\,\face where the wind speed is\, 40 m/s
or  more  per  second  may  cause  a  fa\f\f  of  the  product 
resu\fting in injury or accidents.
Th\bs product shall be\H \bnstalled \bn a v\bbra\Ht\bon-free 
place.  
Fai\fure  to  observe  this  may  cause  screws  and  bo\fts  to 
be \foosened and con\,sequent\fy to fa\f\f resu\fting in injury.
Install th\bs produc\Ht h\bgh enough to ens\Hure that 
people don't h\bt the\H\br heads. 
Fai\fure  to  observe  this  may  cause  a  drop  resu\fting  in 
injury or accidents. 
Do not str\bke or g\b\Hve a strong shock t\Ho th\bs product.
Fai\fure to observe this m\,ay cause injury or fire.
Turn the power off \Hwhen do w\br\bng of th\H\bs product.
Fai\fure  to  observe  this  may  cause  e\fectric  shock.  In 
addition short circuit or wrong wiring may caus\,e fire.
Do not use th\bs pro\Hduct \bn an atmosphe\Hre of 
flammable gases. 
Fai\fure to observe this m\,ay cause injury by exp\fosion. 
Avo\bd \bnstall\bng th\bs\H product \bn locat\bo\Hns where \bt \bs 
subject to damage by\H salt or corros\bve \Hgas.
Otherwise the mounting fixtures wi\f\f deteriorate, causing 
the product to fa\f\f down a\,nd \feading to accid\,ents. 
Use the spec\bfied mo\Hunt bracket.
Fai\fure  to  observe  this  may  cause  a  drop  resu\fting  in 
injury or accidents.
Do not rub the edges\H of metal parts w\bt\Hh your hand.
Fai\fure to observe this m\,ay cause injury. 
T\bghten screws and \Hmount\bng fixtures to\H the 
spec\bfied torque. 
Fai\fure  to  observe  this  may  cause  a  drop  resu\fting  in 
injury or accidents. 
The measures of pro\Htect\bon aga\bnst a f\Hall of th\bs 
product shall be tak\Hen.
Fai\fure  to  observe  this  may  cause  a  drop  resu\fting  in 
injury or accidents.
Do not touch the ma\H\bn body wh\ble th\bs pro\Hduct \bs 
pann\bng/t\blt\bng.
Fingers may be cau\,ght up in the movin\,g part, and that
may resu\ft in injury.
Do not hang down fr\Hom th\bs product or \Huse th\bs 
product as a pedes\Htal.
Fai\fure to observe this m\,ay cause injury or accidents. 
						

							8
[Precaut\bons for us\He]
Th\bs product has no \Hpower sw\btch. 
When turning off the power, turn off a circuit breaker.
To keep on us\bng w\b\Hth stable performanc\He
Parts  of  this  product  may  deteriorate  and  it  may  shorten 
the \fifetime of this product when using in \focations subject 
to high temperatur\,es and high humidi\,ty. 
Do  not  expose  this  product  to  direct  heat  sources  such 
as a heater. 
Handle th\bs product \Hw\bth care. 
Do  not  drop  this  product,  nor  app\fy  shock  or  vibration 
to this product.
Fai\fure to observe this m\,ay cause troub\fe.
Do not touch the do\Hme cover w\bth your \Hbare hands.
A  dir ty  dome  cover  causes  deterioration  of  picture 
qua\fity.
What to do \bf "WARM\HING UP, PLEASE WAI\HT." 
appears on the d\bsp\Hlay.
\bhis message indica\,tes that the tempe\,rature inside the
camera has become \,extreme\fy \fow.
In such a case, wait\, unti\f the heater u\,nit of the camera
raises  the  interna\f  temperature  (for  around  2  hours  or 
more  in  \fow  temperatures  be\fow  –10  ºC),  and  turn  on 
the power again.
What to do \bf "CAME\HRA TEMP. TOO COLD. \HPOWER 
ON AT -30 DEG C (-\H22 DEG F) OR MORE."\H appears 
on the d\bsplay.
\bhe ambient tempera\,ture is too co\fd. 
P\fease  turn  on  the  power  under  the  conditions  where 
the ambient temper\,ature is above -30 °C.
D\bscolorat\bon on the\H CCD color filter 
W h e n   c o n t i n u o u s \f y   s h o o t i n g   a   b r i g h t   \f i g h t   s o u rc e 
such  as  a  spot\fight,  the  co\for  fi\fter  of  the  CCD  may 
have  deteriorated  and  it  may  cause  disco\foration. 
Even  when  changing  the  fixed  shooting  direction  after 
continuous\fy  shooting  a  spot\fight  for  a  certain  period, 
the disco\foration m\,ay remain. 
Do not a\bm th\bs prod\Huct at strong l\bght\H sources. 
A  \fight  source  such  as  a  spot  \fight  causes  a  b\fooming 
(\fight b\feeding) or\, a smear (vertica\f \fines). Clean\bng th\bs produc\Ht body
\bur n  the  power  off  when  c\feaning  this  product.  Do 
not  use  strong  abrasive  detergent  when  c\feaning  this 
product. Otherwise, it\, may cause disco\for\,ation.
About the self-d\bagn\Hos\bs funct\bon
When  this  product  ma\ffunctions  due  to  exogenous 
noise,  etc.  for  30  seconds  or  more,  the  product  wi\f\f 
automatica\f\fy reset and wi\f\f return to norma\f state. When 
the  product  is  reset,  initia\fization  wi\f\f  be  carried  out 
as  when  the  power  of  the  product  is  turned  on.  When 
the  product  repeated\fy  resets,  exogenous  noise  \feve\f 
around  the  product  may  be  high  and  that  may  cause 
ma\ffunction. Contac\,t your dea\fer for i\,nstructions.
Lens and pan/t\blt h\Head
If a \fens and pan/t\,i\ft head are not performed for a \fong
period  of  time,  the  grease  coating  inside  these  parts 
may  become  sticky.  \bhat  may  obstruct  the  parts  from 
moving.  \bo  prevent  this,  move  the  \fens  or  pan/ti\ft  head 
periodica\f\fy. Or perform position refresh periodica\f\fy. 
About the pos\bt\bon re\Hfresh funct\bon
Noise  may  be  produced  or  the  preset  positions  may 
become inaccurate \,after a \fong operat\,ion.
Execute  the  "REFRESH"  operation  periodica\f\fy,  the 
c a m e r a   p o s i t i o n   w i \f \f   b e   c o r re c t e d ,   a n d   i t   i s   a \f s o 
recommended  to  c\fean  the  s\fip  ring  of  the  camera. 
Refer  to  the  operating  instructions  (PDF)  for  fur ther 
information.
Consumable parts
\b h e   f o \f \f o w i n g   a re   c o n s u m a b \f e s :   R e p \f a c e   t h e m   i n 
accordance  with  their  \fives.  \bheir  \fives  vary  depending 
on use environment and conditi\,ons. 
Lens  unit,  s\fip  ring:  Approx.  3.7  mi\f\fion  operations 
(Lifetime  around  20000  hours  is  just  an  indication  when 
using the camera a\,t +35 °C.)
Coo\fing fan (motor)\,: around 52000 hours
Synchronous mode se\Htt\bng
Image  synchronous  mode  of  this  camera  indicates 
interna\f  synchronization  (IN\b)  on\fy.  Set  the  mu\ftip\fex 
v e r t i c a \f   d r i v e r   ( V D 2 )   a s   O F F   w h e n   t h e   c a m e r a   i s 
connected to the s\,ystem contro\f\fer of the compan\,y.
Blooming Smear
Bright subject 
						

							9
Major operating \font\urols 
Ensur\bng Trouble-fre\He Operat\bon
 •  \bhis  camera  uses  a  "s\fip  ring "  for  transmission  of  e\fectrica\f  power  and  signa\fs.  A  dirty  s\fip  ring  can  cause 
deterioration of p\,icture qua\fity during pa\,nning and generati\,on of noise. 
    In  order  to  ensure  troub\fe-free  camera  operation,  make  sure  that  the  c\feaning  function  is  turned  on.  Refer  to  the 
operating instruct\,ions (PDF).
  •  If  c\feaning  the  s\fip  ring  does  not  e\fiminate  poor  picture  qua\fity  and  noise,  it  cou\fd  mean  that  the  s\fip  ring  has 
reached the end of \,its service \fife. Co\,ntact a qua\fified s\,ervice person or sy\,stem insta\f\fer to h\,ave it rep\faced. 
OPEN LOCK
LOCK
ST AR T
Alarm Inp\ft 
Conne\btor
Alarm O\ftp\ft 
Conne\btor
Video O\ftp\ft 
Conne\btor
Data Port
Power Cable
WARNING
INPOR TANTCamera Safety 
Wire
Rear S\fn Shield
(provided) (RS485)
Atta\bhment Pipe
Ho\fsing Base
S\fn Shield (pre-atta\p\bhed at fa\btory)
Front S\fn Shield
(provided)
This part \bannot
removed.
Lens
The lens \bannot repla\p\bed.
Dome \bover (do not rem\pove)   
						

							10
Pre\fautions for inst\uallation
The follow\bng po\bnts as well as the contents of 
"Warn\bng" and "Caut\bon" shall be observed.
Panason\bc assumes no respons\bb\bl\bty for \bnjur\bes or 
property damage result\bng from fa\blures ar\bs\bng out 
of \bmproper \bnstallat\bon or operat\bon \bncons\bstent 
w\bth th\bs documentat\bon.
Installat\bon work shall be performed \bn accordance w\bth 
the technology standard of the electr\bc \bnstallat\bon.
  Installat\bon Locat\b\Hon 
  •  Insta\f\f  the  camera  on  a  concrete  cei\fing  or  wa\f\f  at  a 
\focation that is su\,fficient\fy strong to support it.
  •  For wa\f\f mounting, use the optiona\f\fy avai\fab\fe (WV-
Q122) Wa\f\f Mount Bracket.
  •  Bo\fts  for  mounting  the  cei\fing  mount  Attachment 
Pipe  to  a  cei\fing  or  wa\f\f  are  not  provided.  You  need 
to purchase them separate\fy in accordance with the 
m a t e r i a \f s   a n d   s t r e n g t h   o f   t h e   p \f a c e   y o u   a r e 
insta\f\fing the came\,ra. 
Th\bs camera \bs des\bgned for use \bn a hang\bng conf\bgurat\bon 
only. 
Install the camera \bn a hor\bzontal conf\bgurat\bon, w\bth 
the dome po\bnted downwards. 
For wa\f\f mounting, use the optiona\f\fy avai\fab\fe (WV-Q122) 
Wa\f\f Mount Bracket. Use the Screws recorded in the tab\fe 
as  be\fow.  Screws  are  not  provided,  and  they  shou\fd  be 
prepared  in  accordance  with  the  materia\fs,  structure  and 
gross weight of the p\face you are insta\f\fing the camera.
Mounting condition\,s
\bhis 
camera App\ficab\fe mount br\,acket Joint portion to cei\fing or \,
wa\f\f surface
Weight  Mode\fWeight Insta\f\fation 
position Recommen-
ded screw Screw 
quantity Minimum pu\f\f-out 
strength (per 1 pc.)
Approx. 4.5 k gWV-Q122Approx.
2 k gOn wa\f\fM84 
pieces823 N
{84 kgf}
  •  Ensure  that  the  mounting  sur face,  anchor  and 
screws are sufficient\fy strong.
  •  Do  not  mount  this  product  on  a  p\faster  board  or  a 
wooden  section  because  they  are  too  weak.  If  this 
product  is  unavoidab\fy  mounted  on  such  a  section, 
the section sha\f\f b\,e sufficient\fy reinforced.
Avo\bd \bnstall\bng th\bs product \bn the follow\bng locat\bons.
  •  Locations  where  a  chemica\f  agent  is  used  such  as 
a swimming poo\f.
  •  Locations  subject  to  steam  and  oi\f  smoke  such  as  a 
kitchen, Locations near f\fammab\fe gas or vapor.
  •  Locations  where  radiation  or  x-ray  emissions  are 
produced.
  •  L o c a t i o n s   w h e r e   c o r r o s i v e   g a s   i s   p r o d u c e d , 
Locations  where  it  may  be  damaged  by  briny  air 
such as seashores.
  •  L o c a t i o n s   w h e re   t h e   t e m p e r a t u re   i s   n o t   w i t h i n 
 –50 °C to +50 °C.
  •  Locations  subject  to  vibrations  (\bhis  product  is  not 
designed for on-veh\,ic\fe use.)
  •  Locations  subject  to  condensation  as  the  resu\ft  of 
severe  changes  in  temperature  (In  case  of  insta\f\fing 
the  product  in  such  \focations,  the  dome  cover  may 
become  foggy  or  condensation  may  be  caused  on 
the cover.)
Avo\bd mo\bst or dusty places to \bnstall th\bs product. 
O t h e r w i s e ,   \f i f e t i m e   o f   t h e   i n t e r n a \f   p a r t s   m a y   b e 
shortened.
Avo\bd \bnstall\bng th\bs product \bn a place w\bth a h\bgh 
level of no\bse.
Insta\f\fation  near  an  air  conditioner,  an  air  c\feaner,  a 
vending machine, or the \fike causes noise.
Remove the cover f\b\Hlm from the dome se\Hct\bon of the
dome cover after t\Hhe \bnstallat\bon \bs c\Homplete.
Be sure to remove \Hth\bs product \bf \bt \bs\H not \bn use.
Keep th\bs product cable away from the l\bght\bng cable.
Conduct the power distribution work to keep a distance 
of  1  m  or  more  from  the  220  V  -  240  V  power  \fine.  Or 
conduct the e\fectri\,c conduit work sepa\,rate\fy.
Fai\fure to observe this may cause noise.
Rad\bo \bnterference
When  this  product  is  used  near  \bV/radio  antenna, 
strong e\fectric fie\fd or magnetic fie\fd (near a motor or a 
transformer), images may be distorted and noise sound 
may  be  produced.  In  such  a  case,  run  the  camera 
cab\fe through specia\fized st\,ee\f conduit tubes. \,
Note:   •  S e \f e c t   a   p \f a c e   t h a t   i s   s t ro n g   e n o u g h   f o r   t h e 
insta\f\fation. If you insta\f\f the camera on a cei\fing or 
wa\f\f,  except  for  accidents  caused  by  fau\ft  in  the 
c a m e r a ,   P a n a s o n i c   h o \f d s   a b s o \f u t e \f y   n o 
responsibi\fity  for  accidents  caused  by  the  camera 
fa\f\fing due to unsuitab\fe insta\f\fation. \bake sufficient 
care  when  insta\f\fing  the  camera.  If  the  insta\f\fation 
i s   n o t   s t ro n g   e n o u g h ,   b e   s u re   t o   s u ff i c i e n t \f y 
reinforce the \focation and\, check that it is \,safe. 
  •  \bo  prevent  the  camera  from  fa\f\fing,  attach  the 
safety  wire  to  the  mounting  bracket  or  the  anchor 
bo\ft before starting to insta\f\f the camera to prevent 
it from fa\f\fing. 
  •  A\fways  request  insta\f\fation  work  from  a  qua\fified 
service person or system insta\f\fer. Lack of technica\f 
know\fedge  creates  the  risk  of  fire,  e\fectric  shock, 
persona\f injury, and materia\f damage.