Panasonic Combination 15.2" Lcd Tv Dvd Player Tc 15dt2 Operating Instructions

							51
To enjoy program repeat play
If REPEAT MODE is pressed during program play (see page
52), the display changes as follows:
To return to program play
Press REPEAT MODE until “ OFF ” is displayed. Program play
Repeat of programmed track
being played
Repeat of all programs
Cancel repeat mode
(Program play)
TPRG
APRG
OFFOFFPRG
A   A   •
2Press A-B REPEAT at the point where
repeat play is to be concluded (B).
A  BA  B
Repeat play of the section between points A and B starts.
To return to normal play
Press A-B REPEAT until “ • • ” is displayed.
Note
• A-B repeat play does not work with an interactive DVD.
• Some subtitles recorded around point A or B may fail to appear
(DVD).
• A-B repeat play works only within a title (DVD) or a track (Video
CD/CD).
For your reference:
• The end of a track or title is automatically determined as point B.
  ∗  ∗1 2 3 4
Storing markers in memory to be
viewed (listened to) again
Repeating sections between two
specific points ( A-B repeat )
1Press A-B REPEAT during play at the point
where repeat play is to start (A).
Note
• Some subtitles recorded around the marker may fail to appear. [DVD]
• These operations do not work with an interactive DVD or during
menu play of a Video CD with playback control.
For your reference:
• All the markers are cleared when the player is set to the standby
mode or turned off, or OPEN CLOSE is pressed.
4Press SELECT (  
) button to recall a marker.
or
Press CANCEL to clear a marker.
Play resumes from the point corresponding to the selected marker.
or
The selected marker is cleared.
  ∗  ∗1 2 3 4
3Press SELECT (  ,  ) button to select the
marker to be recalled/cleared.
1Press the DISPLAY during play to display
the Disk information.
2
Recalling / clearing a marker
Press SELECT (  ,  ) button to select the
marker item.
• Press select (  
) key and press ENTER to store the next marker.
• Up to 5 markers can be stored in the memory.
• Press MARKER to clear the display.
  ∗ ∗ ∗ ∗  ∗ ∗ ∗ ∗1Indicates “MARK 1” is stored in the
memory.
(If ENTER is pressed where any
number is already displayed, the
previous starting point will be
replaced by the new one.)
3Press SELECT during play at the starting
point to be viewed (listened to) again.
2Press SELECT (  ,  ) button to select the marker item.
The marker screen appears
on the TV monitor.
“ 
 ” indicates no marker has
 been stored yet.
1Press the DISPLAY during play to display
the Disk information.
Storing a marker in the memory
∗ ∗ ∗ ∗ ∗∗ ∗ ∗ ∗ ∗ 
						

							52
DISPLAY
ANGLE
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEATPLAY MODE
R-TUNE
TV      
MENUENTER
RETURN
PLAY
DVD
MENU
T
O
P
 
M
E
N
U
STOP
SKIPSLOW/SEARCH
OPEN
CLOSE
POWER
SELECT
• Repeat steps 2 and 3 to select another track.
• Up to 18 tracks can be programmed.
3Press ENTER.
The selected track is stored in the memory.
4Press PLAY.
Play now begins in the programmed sequence.
After playback
Play stops after the last programmed track.
Numeric
buttons
 STOP
CANCEL
PLAY
MODE
 PLAY
Choose  a  track ,  then  press  ENTER.
Press  PLAY  to  start
             Track        Time 1   
2
3
4  
5
6
7
8Clear
Total timeClear all 5:55
5:55 1
Choose  a  track ,  then  press  ENTER.
Press  PLAY  to  start
             Track        Time 1   
2
3
4  
5
6
7
8Clear
Total timeClear all
The player plays the tracks on the disc in an order you specify.
Press PLAY MODE in the stop mode.
The program playback screen appears on the TV monitor.
1
2Press ENTER and press SELECT (  ,  
)
button to select the track.
• To exit the screen
Press PLAY MODE twice.
Program play [ Video CD / CD ]
Choose  a  track ,  then  press  ENTER.
Press  PLAY  to  start
             Track        Time 1   
2
3
4  
5
6
7
8Clear
Total timeClear all1 
						

							53
To return to normal play
1.  Press STOP. (Program play is suspended.)
2.  Press PLAY MODE twice.
3.  Press PLAY.
Normal play begins from the beginning of the disc.
• The program is retained in the memory.
Clearing the program
When the program playback screen is displayed.
• To clear the last program one by one
Move to “Clear last” and press SELECT.
(Pressing CANCEL on the remote control also clears the last
program.)
• To clear the whole program
Move to “Clear all” and press SELECT.
(The program is also cleared when the player is set to the
standby mode or turned off, or OPEN CLOSE is pressed.)
Random play [ Video CD / CD ]
Press PLAY MODE twice in the stop mode.
The random playback screen appears on the TV monitor.
1
• To exit the screen
Press PLAY MODE once. The player plays the tracks on the disc in random order.
2Press PLAY.
Play now begins in random order.
After playback
Play stops and the random playback screen is displayed.
To return to normal play
1.  Press STOP. (Random play is suspended.)
2.  Press PLAY MODE once.
3.  Press PLAY.
Normal play begins from the beginning of the disc.
Random Playback
Press PLAY to start 
						

							54
DISPLAY
ANGLE
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEATPLAY MODE
R-TUNE
TV      
MENUENTER
RETURN
PLAY
DVD
MENU
T
O
P
 
M
E
N
U
STOP
SKIPSLOW/SEARCH
OPEN
CLOSE
POWER
SELECT
DISPLAY
Changing audio soundtrack
language 
[ DVD ]
It is possible to change the audio soundtrack language to a
different language from the one selected at the initial settings if
available. (See page 57.)
This operation works only with discs on which multiple audio
soundtrack languages are recorded.
Number of the audio
soundtrack language
being played back
1 1 ENGENG96k 24b96k 24bLPCMLPCM
HelloHello
Numeric
buttons
1Press DISPLAY during play to display the
disk information.
The program playback screen appears on the TV monitor.
• When no audio soundtrack is recorded, “–” will be displayed
instead of the language number.
For your reference:
• When the preferred language is not selected, even after press the
SELECT (  
,  
) button several times, it means that language is not
available on the disc.
• When the power is turned on, or the disc is removed, the language heard
is the one selected at the initial settings. If this language is not recorded
on the disc, only the available language on the disc will be heard.
• Press DISPLAY or ENTER to clear
the display.
3Press SELECT (  ,  
) to select the
language.
Pressing the numeric buttons
also changes the audio
soundtrack language.2 2 FRAFRA96k 24b96k 24bLPCMLPCM
BonjourBonjour
2Press SELECT (  ,  ) to select the AUDIO
soundtrack. 
						

							55
Viewing from another angle [ DVD ]
Some DVDs contain scenes which have been shot
simultaneously from a number of different angles. For these discs,
the same scene can be viewed from these different angles with
the ANGLE button. (The angles depend on the disc used.)
Changing subtitle language [ DVD ]
1Press DISPLAY button to display the player
information.
• When no subtitles are recorded, “– –” will be displayed
instead of the language number. It is possible to change the subtitle language to a different
language from the one selected at the initial settings if available.
(See page 57.)
This operation works only with discs on which multiple subtitle
languages are recorded.
Number of the audio
soundtrack language
being played back
2Press SELECT (  ,  ) to select SUBTITLE
language item.
To clear/display the subtitles
Press the SELECT 
(  ,  
) to select ON or OFF at step 2.
For your reference:
• When the preferred language is not selected, even after press
the SELECT (  
,  
) several times, it means that language is
not available on the disc.
• When the power is turned on, or the disc is removed, the
language heard is the one selected at the initial settings. If this
language is not recorded on the disc, only the available
language on the disc will be heard.
• Press SUBTITLE or ENTER
to clear the display.
3Press SELECT (  ,  
) to select the language.
Pressing the numeric
buttons also changes the
subtitle language.
I love youI love you
1  1  ENGENGONON
Je t’aimeJe t’aime
2  2  FRAFRAONON
Press ANGLE during play.1
2Press SELECT (  ,  
)  to select the angle.
Pressing the numeric buttons
 also changes the angle.
• Press ENTER to clear the display.Number of angle being
played back
Note
• This function only works for titles having scenes recorded at
different angles.
1 
3 3  
						

							56
DISPLAY
ANGLE
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEATPLAY MODE
R-TUNE
ENTER
RETURN
PLAY
DVD
MENU
T
O
P
 
M
E
N
U
STOP
SKIP
TV      
MENU
SLOW/SEARCH
OPEN
CLOSE
POWER
SELECT
Once the intial settings have been completed, the player can
always be operated under the same conditions (especially DVDs).
The settings will be retained in the memory, until the settings are
changed, even after switching to standby mode.
Numeric
buttons
CANCEL
Initial settings
1Press TV MENU to display menu screen
during stop mode. Common procedures
RETURN TV MENU
2Press SELECT (  ,  
) to select SETUP.
3Press SELECT (  ,  
) to select DVD SETUP,
and press ENTER.
Initial Setting menu
MENU
ADJUSTSET  UP
PROGRAM  CH
DVD  SET  UP
LOCK
CLOSED  CAPTION
INPUT  LABEL
OTHER  ADJUST
4Press SELECT (  ,  
) to select the item
and press ENTER.
Each screen for setting the value is displayed.
1  Disc Languages
2  Ratings
3  Menu Language
4  On-Screen Messages
5  TV Aspect
6  Digital Audio Output
7  Speaker Setting
9  Other Settings
1 Disc Languages
2 Ratings Level 8
3 Menu Language English
4 On-Screen Messages
5 TV Aspect 16:9
6 Digital Audio Output
7 Speaker Setting
9 Other Settings
0 Exitsee page 57
see page 57
see page 59
see page 59
see page 60
see page 61
see page 62
see page 64 
						

							57
Selecting rating level  [DVD]
At the initial settings screen (on page 56)
Press the SELECT (  ,  
) button to select
“2 Ratings” and press ENTER.
1
This is to disable the playing of some DVDs which are unsuitable
for some audiences, for example, children.
• Some DVDs are encoded with a specific rating level. If the
rating level of the disc is higher than that preset in the initial
settings operation, playback of the disc will be prohibited.
Please set a rating limit8 No Limit
7
6
5
4
3
2
1
0 Lock All
Press RETURN to cancel
(Continued on the next page)When “2 Subtitle” is selected
1  Automatic:Subtitle language will automatically be
selected in accordance with the audio
soundtrack language.
(Factory preset)
• If the language selected for the “I
Audio” is actually used during
playback, the subtitles will not appear.
• If another language is used during
playback, the subtitles will appear in the
language selected at the setup “I Audio”.
2  English / 3, French / 4, Spanish:
The language is selected.
5  Other 
∗∗∗∗:Another language can be selected.
(Refer to the language codes on page
66. Press CANCEL if an incorrect
language code is entered.)
When “3 Menus” is selected
1  English:English is selected. (Factory preset)
2  French /3, Spanish:
The language is selected.
4  Other 
∗∗∗∗:Another language of each disc will be
selected.
(Refer to the language codes on page
66. Press CANCEL if an incorrect
language code is entered.)
The screen illustrated in step 1 is displayed. Select “0” with
the SELECT ( 
 
,  
) button and press ENTER to return to
the initial settings screen.
Also refer to “Common procedures” on page 56.
Note
• If the language selected is not available on the disc, the
language designated by each disc will be selected.
Selecting disc language [DVD]
At the initial settings screen (on page 56)
Press SELECT (  ,  
) to select “1 Disc
Languages” and press ENTER.1
This is to select the audio soundtrack language, subtitle language
and the language used in title menus or the DVD menus which
will always be used for every disc to be played back.
Disc Languages
1  Audio English
2  Subtitle Automatic
3  Menus English
0  Exit
2Press SELECT (  ,  
) to Select the item and
press ENTER.
1  Audio:
To select the audio soundtrack language.
2  Subtitle:
To select the subtitle language.
3  Menus:
To select the language used in title menus or the DVD
menus.
3Press SELECT
 (  ,  
) to select the language
and press ENTER.
When “1 Audio” is selected
1  English:English is selected. (Factory preset)
2  French / 3, Spanish:
The language is selected.
4  Original:The original language of each disc will
be selected.
5  Other 
∗∗∗∗:Another language can be selected.
(Refer to the language codes on page
66. Press CANCEL if an incorrect
language code is entered.)
To cancel during setup operation
Press RETURN or select “0”. (The previous screen is displayed.)
To clear the initial settings screen
Press SELECT (  ,  
) to select “0” and press ENTER.
 (Pressing TV MENU or RETURN also clears the initial settings
screen.)
Note
• After the player is set to the “Lock All” setting in “2 Ratings”,
none of the initial settings, including “2 Ratings”, can be
changed if a DVD is left inside the player. In this case, remove
the disc, and unlock the player.
For your reference:
• The numeric buttons can also be used instead of the SELECT
(  
,  
) button for selecting items or values. Pressing SELECT
is not necessary.
Initial settings 
						

							58
1 . Input your 4-digit password and press ENTER.
2. To unlock the player
Press “1” and then press ENTER.
To change the password
Press “2”, enter a new 4-digit password and press ENTER,
then press ENTER again.
To change the rating level Press “3”, select a new level
with the SELECT ( 
 ,  
) button, then press ENTER.
To unlock the player temporarily
Press “4” and then press ENTER.
• The rating is unlocked temporarily only for the current disc.
The player is locked again when OPEN / CLOSE is
pressed or the player is set to the standby mode.
To finish setting without changing the rating level
Press “0”.
Setting is finished and the initial settings screen is displayed.
Ratings1 Unlock Player
2 Change Password
3 Change Level
4 Temporary Unlock
0 Exit
Note
• Some discs may not be encoded with specific rating level
information though its disc jacket says that it is for “adults”. Fo r
those discs, the age restriction will not work.
Also refer to “Common procedures” on page 56.
23
RatingsThe player is locked.
Remember the password.
Press RETURN to continue
4 3 4 3
4Press ENTER.
Setting is finished and the initial settings screen is displayed.
• The rating is locked. Any discs with a higher rating than the
setting cannot be played back unless the password is entered.
When the player is locked
The following screen appears when “2 Ratings” is selected at
the initial settings screen.
RatingsEnter your 4-digit password.
then press SELECT.
Press RETURN to cancel
Press the SELECT (  ,  ) button to select
the level and press ENTER.
Level 8:All DVDs can be played back.
(Factory preset)
Level 7 to 2:DVDs for general audiences/children
can be played back.
(DVDs for adults are prohibited.)
Level 1:DVDs for children can be played back.
(DVDs for adults/general audiences are
prohibited.)
Level 0:Playback of all DVDs is prohibited (e.g.
to prohibit playback of DVDs for adults
which are not encoded with rating level
information).
RatingsEnter a 4-digit password.
then press SELECT.
Press RETURN to cancel
When level 7 or lower is selected
Input a 4-digit password with the numeric
buttons and press ENTER.
The lock symbol
appears closed to
show the rating is
locked.
Example: “4343”
Do not forget your
password.
Initial settings
DISPLAY
ANGLE
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEATPLAY MODE
R TUNE
ENTER
RETURN
PLAY
DVD
MENU
T
O
P
 
M
E
N
U
STOP
SKIP
TV      
MENU
SLOW/SEARCH
OPEN
CLOSE
POWER
SELECT
Numeric
buttons 
						

							59
At the initial settings screen (on page 56)
Press SELECT (  ,  ) to Select “3 Menu
Language” and press ENTER.
1
This is to select the language to be used in the On-Screen Display
menus which the player will show on the TV monitor.
1 English
2 Français
3 Español
 
 
Press RETURN to cancel Select the language
for these Menus.
Also refer to “Common procedures” on page 56.When “2 Color and Position” is selected
The colors and positions are set as follows:
1   
  Blue (Factory preset)
2   
  Violet
3   
  Green
4   
  Blue
5   
  Violet
6   
  Green
Selecting On-Screen Display menu
language
The screen illustrated in step 1 is displayed. Select “0” with the
SELECT (  
,  
) button and press ENTER to return to the initial
settings screen.
Also refer to “Common procedures” on page 56.
For your reference:
• When  is selected, “Play”, “Still” and other displays
as well as GUI screens will be displayed at a little lower position
than the factory setting. It is recommended to choose this
setting if the screen is only partially displayed.
Initial settings
Selecting On-Screen Display Messages
At the initial settings screen (on page 56)
Press SELECT (  ,  ) to select “4 On-
Screen Messages” and press ENTER
.
1
You can select whether “Play”, “Still” and other displays will be
displayed or not, and the color and position of “Play”, “Still” and
other displays as well as GUI screens.
On-Screen Messages
1 On-Screen Messages    On
2 Colour and Position                Blue 
0 Exit
2Press SELECT (  ,  
) to Select the language
and press ENTER.
1  English:
 English is selected. (Factory preset)
2  Français / 3, Español :
The language is selected.
Setting is finished and the initial settings screen is displayed.
2Press SELECT (  ,  ) to select  the setting
and press ENTER.
When “1 On-Screen Messages” is selected
1  On:  “Play”, “Still” and other displays will always appear
on the TV screen. (Factory preset)
2  Off:  “Play”, “Still” and other displays will not appear on
the TV  screen. 
						

							60
Selecting TV screen Aspect
Select the TV aspect, conventional size screen (4:3) or wide-
screen (16:9), when connecting to your TV set.
At the initial settings screen (on page 56)
Press SELECT (  ,  ) to Select “5 TV Aspect”
and press ENTER.
1
Select your TV aspect
1        4 : 3
2      16 : 9
Press RETURN to cancel
2Press SELECT (  ,  
) to select the TV aspect
and press ENTER.
1  4:3:
Select when a conventional TV set is connected.
2  16:9:
Select when a wide-screen TV set is connected.
(Factory preset)
Setting is finished and the initial settings screen is displayed.
Initial settings
DISPLAY
ANGLE
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEATPLAY MODE
R-TUNE
ENTER
RETURN
PLAY
DVD
MENU
T
O
P
 
M
E
N
U
STOP
SKIP
TV      
MENU
SLOW/SEARCH
OPEN
CLOSE
POWER
SELECT
For your reference:
• For further details on the images which appear on the TV screen
(aspect ratios of the screen), see page 67.
Also refer to “Common procedures” on page 56.