Panasonic Combination Vcr Pv C1323 Operating Instructions

2121
TV Operation  FM radio cannot be recorded on a Video cassette.
  You may get better reception by repositioning the 
unit.
  You cannot select FM Radio mode during playback or 
record, or while a blue back screen (PROG, ACTION, 
MENU) is displayed.
  Once stations are set, the selected station and current 
time are displayed when FM Radio mode is entered. 
To remove time, press DISPLAY. If DISPLAY is 
pressed again, the unit status screen appears.
How to use the FM radio
FM  1     87.  5MHz
1 2 :...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Press PROG to 
end the program. 
To Enter More Programs, 
press 
    to select 
and    to set a blank 
program number, and 
then repeat step 3.
4
P  DT  START    STOP    CH  SPD
1            day  9 : 00 p  12 : 00a  08     SP2   -- -- : --   -- : --  --  --3   -- -- : --   -- : --  --  --4   -- -- :...

2323
Timer Operation
Repeat steps 1 and 2 on page 22.
1
P  DT  START    STOP    CH  SPD1   day    9 : 00p 12 : 00a  08     SP2     8  10 : 00a 12 : 00p 125    SP3   10    8 : 00p  9 : 00p  10    SP4   SU    9 : 00p 10 : 00p     L    LP
CANCEL : ADD / DLT
SELECT :                  SET : END       : PROG
8  SAT  9:00P  12: 00A 08TODAY
----------------------------------------------
DATE       START       STOP       CH
   SP
SELE
CT :                  SET : END       : PROG
Press PROG twice to exit this...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are 
made, program index and information are also included. These index marks can be used to access or 
scan recordings.
1
Press SEARCH in 
Playback or Stop 
mode to display 
INDEX...

2525
Advanced Operation
  Auto Operation Functions
 
Tape Position Display
Press TAPE POSITION to detect current tape 
position.
1
DETECT I NG  TAPE  POS I T I ON
2
■  Auto Shut Off      No broadcast signal in TV (Only when 
Weak Signal Display is set to OFF), 
blank tape is Played for 5 minutes 
➞ Power turns off 
        This feature is canceled if any button is 
pressed during above mode. 
■ Auto Playback
     Insert a tape in Power off mode 
➞ Power turns on  
        Playback begins if tape has no...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
  Zero Search
To quickly return to a speci c tape counter location. 
1
2
Press STOP.
4
53
Continue playback, rewind, or fast 
forward.
Press COUNTER 
RESET at the 
desired position to 
reset to “0:00:00.”
  Unit goes into FF or REW mode and stops at the last 
point the Counter was set to 0:00:00....

2727
Advanced Operation
  Repeat Play
Set to see a recording over and over.
  Playback repeats when tape end is reached or 
unrecorded portion over 30 seconds is detected.
PLAYREPEAT  ON
PLAYREPEAT  OFF
PLAY/REPEAT
POWERPOWER
VIDEO IN
AUDIO IN
VOL CHSTOP/EJECTREW/
PLAY/REPEATFF/
RECTIMER/FMACTIONR E C ON TIMERPROG TIMER
In PLAY mode, 
press 
PLAY/REPEAT 
on the unit to 
turn “ON.” 
Repeat above to 
turn “OFF.”
Note 

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1) Press     to select 
WEAK SIGNAL 
DISPLAY .
2) Press 
   to set “ON” or 
“OFF.”
1) Press       
 to 
select “CH.”
2) Press ACTION to 
display SET UP 
CHANNEL screen.
When “ON” is selected, the picture is displayed even when 
a broadcast signal is weak or non-existent.
ANTENNA  :   CABLE
AUTO...

2929
Advanced Operation
Press ACTION to display MAIN MENU.
 
Enter Secret Code
V-Chip Control Feature is...
This unit has a built-in V-Chip Control 
which allows you to block unwanted TV 
usage based on US MOVIES and US TV 
PROGRAMS Ratings.
A 4-digit code must be entered to view a blocked program 
or change rating settings.
1
  DO NOT forget your secret code.
  Once ratings are set, restricted tapes or programs cannot be 
accessed unless the secret code is entered.
Changing your secret code
 You will...

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Enter Code
1
1) Press  to 
select US 
MOVIES.
2) Press 
   to set  
“ON” or “OFF.”
If LOCK menu is not displayed, do “Enter Secret 
Code” steps on page 29.
Setup US MOVIES Ratings
Note
  “NEXT PAGE” displays CANADIAN V-Chip setting 
menu. Not necessary except when viewing Canadian 
tapes or...