Panasonic Combination Vcr Pv C2062 Operating Instructions

							Advanced Operation
31
G
PG
PG-13
R
NC-17
XGENERAL AUDIENCE:
All ages admitted.
PARENTAL GUIDANCE:
Some material may not be suitable for
children.
PARENTS CAUTIONED:
Some material may be inappropriate
for children under 13.
RESTRICTED:
Children under 17 must be
accompanied by a parent or adult.
OVER AGE 17 ONLY:
No one 17 and under admitted.
ADULTS ONLY:
FV
V
S
L
DFantasy Violence
Violence
Sexual Situations
Adult Language
Sexually Suggestive Dialogue
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MAFOR ALL CHILDREN:
Content specifically geared to young
viewers ages 2-6.
FOR AGE 7 AND OLDER:
May contain mild physical or comedic
violence which may frighten children
under 7.
GENERAL AUDIENCE:
Contains little or no violence, strong
language, or sexual dialogue or
situations.
PARENTAL GUIDANCE:
May contain infrequent coarse
language, limited violence, some
suggestive sexual dialogue and
situations.
PARENTS CAUTIONED:
May contain sophisticated themes,
sexual situations, strong language, and
more intense violence.
MATURE AUDIENCE:
May contain mature themes, profane
language, graphic violence, and sexual
situations.
US TV PROGRAMS RATINGS: Chart 2
Blocking Message
 If a program or
movie exceeds the
ratings you have
set, a message will
appear on a black
background and
sound is muted. 
To View a Blocked Program / Movie
[Temporarily Deactivate V-Chip Control]
Enter your secret code (ACCESS CODE)
in the Blocking Message screen.
 V-Chip Control is reactivated when power is
turned off or power failure occurs.
[Deactivate V-Chip Control]
Enter your secret code (steps 1-4 page 29).
Then, set US MOVIES and/or US TV
PROGRAMS to “OFF” using 
 and keys. (Ratings set on page 30 is retained
and will be in effect when V-Chip Control is
activated again.)
Enter Code
Process of V-Chip Control Feature
Setup
Blocking
US TV PROGRAMS RATINGS:Chart 1
US MOVIES RATINGS
CH08
RAT I NG : PG-1 3ACCESS  CODE                   ----
PROGRAM  RAT I NG    EXCEEDED
ENTER   : 
0-9
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
ACTION
DISPLAY
inued)
*Important: If a remote control button does not work when pressed, press the COMBO button
 on the remote and try the button again.
Model PV-C2062 remote shown.
LSQT0582A_P22-33.p6512/14/2001, 1:52 PM 31 
						

							32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Universal Remote Control is...
The Remote Control may be set up to control some
basic DSS or Cable box functions.
The Universal Remote Control Setup
1
Cable Box Universal Remote Control Feature
Using the Universal Remote Control
Press COMBO or DSS CABLE on the remote
control to select the desired mode. (See below for
buttons available in each mode.)
Once the remote control has been properly set up, you can
select COMBO, DSS or CABLE mode depending on which
functions you wish to control. (See below.)
Find your DSS box or Cable box
Brand Code Number from one of the
charts on the next page.
3
Confirm code entry.
Press POWER* to turn selected unit
ON or OFF.
 See below for controllable functions in each mode.
 Please repeat the Universal Remote Control Setup after
replacing remote control batteries.
 The remote control will not operate all DSS receivers or
Cable Boxes made by the manufactures listed. If you get
no results, your particular brand cannot be controlled.
Set to COMBO:
 All TV and VCR functions.
Set to DSS CABLE:
 Basic VCR functions, e.g. PLAY, REC, etc.
 CABLE/DSS functions, e.g. POWER, ENTER,
number keys (except 100 key), CH UP/DOWN.
Notes
2
Setup remote.
Hold down DSS CABLE and press
number keys to enter code.
 For code 100 or greater, first press 100 key,
then the remaining digits. E.g. for 102, press
100, then press 0, and then press 2.
ENTER POWER
NUMBER Keys
DSS/ CABLE
COMBO
Model PV-C2062 remote shown.
LSQT0582A_P22-33.p6512/14/2001, 1:52 PM 32 
						

							Advanced Operation
33
DSS Brand Code Numbers
Toshiba .......................... 92
Hitachi/Hughes .............. 93
Magnavox/Uniden 1 ....... 94
Archer ..... 05, 06, 01, 44, 63,
91, 126
Cabletenna ... 01, 44, 63, 91,
126
Cableview..... 63, 44, 42, 30,
52, 04, 124, 126
Century .. 51, 44, 59, 75, 126
Citizen.......... 63, 44, 42, 30,
52, 04, 124, 126
Curtis....... 08, 09, 61, 53, 87
Diamond .. 01, 44, 63, 91, 126
Drake .............................. 67
Eagle...... 13, 22, 58, 62, 20,
40, 26, 107
Eastern .................... 28, 130
GC Brand ...... 63, 44, 42, 30,
52, 04,124, 126
Gemini..................... 04, 124
General Electric......... 57,01
General Instruments .. 01,02,
03, 04, 34, 55, 83, 106, 65,
67, 68, 115, 117, 118, 124, 91
Hamlin .. 14, 15, 28, 41, 102,
103,104, 108, 130
Hitachi ............................ 31
Jasco ...................... 04, 124
Jerrold .... 01, 02, 03, 04, 34,
55, 83,
 106, 65, 67, 68,
115, 117, 118, 124, 91
Macom ........................... 31
Magnavox.............. 26, 112Magnavox/Uniden 2........ 95
Panasonic ....................... 96
RCA ............................... 97
Matsushita..... 16, 17, 97, 109
Movietime ............. 32, 39, 42,
44, 126, 38, 40
NEC ..................... 38, 40, 32
NOVAVISION............ 08, 09,
61, 53, 87
NSC ..................... 38, 40, 32
Oak .................... 46, 11, 129
Oak Sigma ......... 46, 11, 129
Panasonic..... 16, 17, 97, 109
Philips....... 07, 13, 20, 23, 24,
50, 128, 129
Pioneer...................... 05, 06
Pulsar ............ 63, 44, 42, 30,
52, 04, 124, 126
Quest......................... 05, 06
Radio Shack.............. 51, 44,
59, 75, 126
RCA .............. 16, 17, 97, 109
Realistic ... 51, 44, 59, 75, 126
Recoton ... 51, 44, 59, 75, 126
Regal...... 14, 15, 28, 41, 102,
103, 104, 108, 130
Regency.................. 28, 130
Rembrandt........... 01, 32, 39,
42, 44, 63, 126
Salora .............................. 68
Samsung ... 05, 32, 40, 42, 06
Scientific Atlanta........ 08, 09,
61, 53, 87Sony ........................ 98, 105
Sheritech.......................... 27
Signal....................... 26, 112
SL Marx ......... 32, 40, 42, 06,
43, 44, 52, 63, 126
Sprucer......... 16, 17, 97, 109
Standard Components..... 32,
39, 42, 44, 126
Stargate .... 32, 40, 63, 44, 42,
30, 52, 04, 06, 124, 126
Sylvania ........................... 19
Teknika............................ 74
Telecaption ............... 77, 127
Teleview .......... 32, 40, 42, 06
Texscan ..................... 18, 19
Tocom .. 33, 34, 01, 42, 66, 91
Toshiba ............................ 36
Uniden Satellite................ 65
Unika ....... 01, 44, 63, 91, 126
Universal .............. 42, 43, 44,
52, 63, 126
Videoway...... 07, 23, 50, 129
Vid Tech ........................... 64
Vidtek ............................... 64
Viewstar ......... 13, 22, 58, 62,
20, 40, 26, 107
Zenith ............ 07, 23, 50, 129
 In DSS or CABLE mode, it may be necessary to press ENTER after pressing number  keys for
channel selection.
 In DSS or CABLE mode, POWER, CH Up/Down, number Keys, ACTION, PROG, DISPLAY,
SEARCH, R-TUNE, FM/TV, or ADD/DLT are not available. Press COMBO to use these functions.
 Depending on your DSS receiver or Cable box brand, some of the functions listed may not be
remote controllable.
 Some DSS receiver or Cable box brands require you to turn on the power manually.
 Due to changes in infra-red commands used by manufacturers, some brands have several codes. If
your unit does not respond to the first code, please try the next one.
Notes
Cable Box Brand Code Numbers
*Important: If a remote control button does not work when pressed, press the COMBO button
 on the remote and try the button again.
LSQT0582A_P22-33.p6512/14/2001, 1:52 PM 33 
						

							34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
On-Screen Display (OSD)
Warning and Instruction DisplaysThese displays will alert you to a missed
operation or provide further instructions.
OSD
PLEASE SET CLOCK BEFORE
PROGRAMMING
CHECK CASSETTE RECORD TAB
TO CANCEL TIMER REC HOLD
DOWN STOP KEY FOR APPROX 3
SEC
NO CASSETTE
PLEASE INSERT A CASSETTE
 PLEASE PREPARE FOR TIMER REC
VIDEO HEADS MAY NEED
CLEANING PLEASE INSERT HEAD
CLEANING CASSETTE OR REFER
TO MANUAL      END: PLAY KEY
VCR LOCK ACTIVATED
Caution
 If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
 If you press REC, and a cassette is inserted with
no record tab...
 If you press STOP during a Timer Recording...
 If you press PLAY, FF, REW, or REC without a
cassette inserted...
 If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
 If head cleaning becomes necessary while playing
back a tape...
 If you press a function button other than STOP/EJECT
or POWER while the unit is in VCR Lock mode...
Page
8 - 11
3, 12
23
12
22, 23
4
27
Press DISPLAY
to display or remove the overlay.Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to “OFF” (see
page 27), the screen will turn solid blue.
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
0 8ABC
REC         1 2 : 0 0PM0 : 25ABC-0 : 1 2 : 3 4 SPSTEREOSAPMONO
Function Status
Current Time
Rec Time
Remaining
(OTR mode only,
see page 12.)Counter
Tape Speed Channel Caption
(See page 28.)
VCR Status & Clock DisplayBlue Screen Display
Channel & Function Display
Receivable Broadcast
Types (See page 15.)
(For model PV-C2062 only)
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 34 
						

							For Your Information
35
Before Requesting Service
Check the following points once again if you are having trouble with your unit.
If you cannot resolve the problem, please call the Customer Satisfaction Center for
product assistance at 1-800-211-PANA(7262).
To locate an authorized servicenter call toll free 1-800-211-PANA(7262)
or send e-mail to : [email protected].
Power
No power…
Monitor
No picture or sound...
Poor picture with normal sound...
Poor sound with normal picture...
Poor TV reception...
No color or poor color...
Ghost (multiple) images...
TV programs cannot be watched...
Channel cannot be selected...
Correction
 Make sure your antenna system (TV or CABLE), is correctly set. (P. 8)
 Completely insert Power Plug into an AC outlet.
 Set POWER button to ON.
 Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in
the SET UP TV menu. (P. 21)
 Adjust VOLUME control. (P. 14)
 Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P. 2 1 )
 Adjust TINT and COLOR controls in the SET UP TV menu. (P. 21)
 Install a directional antenna.
 Make sure the selected channel is in unit’s memory. (P. 10, 11)
 Only the channel being recorded can be viewed on this unit.
Correction
 Completely insert Power Plug into an AC outlet.
 Set POWER button to ON.
VCR
TV program cannot be
recorded...
Timer recording cannot be
performed…
No playback picture, or the playback
picture is noisy or contains streaks...
VCR cannot be controlled...
Correction
 Make sure your antenna system (TV or CABLE), is correctly set. (P. 8)
 Make sure cassette record tab is intact. (P.3)
 Check that clock is set to current time and date.
 Make sure DSS/CABLE box (if used) is left on and tuned to
channel to be recorded.
 Set recording Start/Stop times correctly. (P. 22-23)
 Timer recording may not be performed or continued if a power
interruption of more than 1 minute occurs before or during a Timer
recording even after power is restored.
 Adjust TRACKING control in either direction. (P. 4)
 Try Head Cleaning. (P. 4)
 Make sure VCR LOCK is set to off. (P. 27)
 Make sure unit is not in a Timer Record operation.
Remote Control
Unit cannot be controlled...
ACTION, PROG and FM/TV
buttons cannot be selected...
Correction
 Aim remote at remote sensor on unit (P. 7) so that signal is
unobstructed.
 Inspect the remote batteries. (P. 3)
 Make sure VCR LOCK is set to off. (P. 27)
 Exposing unit remote sensor to direct fluorescent or outdoor light
may cause signal interference.
 Check remote batteries.
Correction
 Insert the cassette window side up; record tab facing you.
 Completely insert Power Plug into an AC outlet.
 Try ejecting or inserting the tape again after turning POWER off, then back on.
 Make sure cassette record tab is intact. (P. 3)
 To enable Quick Play mechanism, the VCR cylinder will rotate for
about 3 minutes. This reduces response time from Stop to Play
mode and from Play to Rewind Search mode.
 Make sure VCR LOCK is set to off. (P. 27
)
Miscellaneous
Video cassette cannot be inserted...
Video cassette cannot be removed...
Tape cannot be ejected or inserted...
Video cassette ejects when a
recording is started, or the power
is turned off for timer recording...
In Stop mode, the VCR motor
(CYLINDER) continues to rotate...
VCR cannot be controlled...
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 35 
						

							36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Servicenter List
As of June 2001
For Product Information, Operating Assistance, Literature Request, Dealer Locations,
and all Customer Service inquires please contact:
1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST.
or send e-mail : [email protected]
Service in Puerto RicoMatsushita Electric of Puerto Rico, Inc.  Panasonic Sales Company/ Factory Servicenter:
Ave. 65 de Infanteria. Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985
Phone (787) 750-4300   Fax (787) 768-2910
GEORGIA
8655 Roswell Road
Suite 100
Atlanta, GA 30350
ILLINOIS
1709 North Randall Road
Eligin, IL 60123
MASSACHUSETTS
60 Glacier Drive,
Suite G
Westwood, MA 02090
CALIFORNIA
6550 Katella Avenue
Cypress, CA 90630
800 Dubuque Avenue
S. San Francisco,
CA 94080
3878 Ruffin Road
Suite A
San Diego, CA 92123
FLORIDA
3700 North 29th Avenue
Suite 102
Hollywood, FL 33020
MINNESOTA
7850-12th Avenue South
Airport Business Center
Bloomington, MN 55425
OHIO
2236 Waycross Road
Civic Center Plaza
Forest Park, OH 45240
PENNSYLVANIA
2221 Cabot Blvd. West
Suite B
Langhorne, PA 19047
TEXAS
13615 Welch Road
Suite 101
Farmers Branch,
TX 75244
WASHINGTON20425-84th Avenue
South
Kent, WA 98032
HAWAII99-859 Iwaiwa Street
Aiea, Hawaii 96701
Phone (808) 488-1996
Fax (808) 486-4369
Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
nearest servicenter by visiting our Web Site.
Accessory Purchases:
1-800-332-5368 (Customer Orders Only)
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)
(Visa, Master Card, Discover Card, American Express, Check)
Factory Servicenter Locations
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 36 
						

							For Your Information
37
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation
of America, One Panasonic Way
Secaucus, New Jersey 07094Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc.
AVE. 65 de Infantería, Km. 9.5 San Gabriel
Industrial Park Carolina, Puerto Rico 00985
PANASONIC/QUASAR Video  Products
Limited Warranty
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the
Warrantor”) will repair or replace this product with new or refurbished parts or equivalent product, free of charge, in
the USA or Puerto Rico, in the event of a defect in materials or workmanship as follows (all time periods commence
from the date of the original purchase):
PRODUCT
CAMCORDER
DVD/VCR DECK
DIGITAL STILL
CAMERA
A/V MIXER
TV/VCR, TV/DVD
TV/DVD/VCR
COMBINATION
TV/HDR
COMBINATIONLABOR
NINETY (90) DAYS
NINETY (90) DAYS
NINETY (90) DAYS
NINETY (90) DAYS
NINETY (90) DAYS
NINETY (90) DAYS
NINETY (90) DAYS
CRT - NINETY (90) DAYS
NINETY (90) DAYS
CRT - NINETY (90) DAYS
PARTS
ONE (1) YEAR, EXCEPT
CCD IMAGE SENSOR
CCD IMAGE SENSOR
- SIX (6) MONTHS
ONE (1) YEAR
ONE (1) YEAR, EXCEPT
CCD IMAGE SENSOR
CCD IMAGE SENSOR
- SIX (6) MONTHS
ONE (1) YEAR
ONE (1) YEAR,
EXCEPT CRT
CRT - TWO (2) YEARS
ONE (1) YEAR,
EXCEPT CRT
CRT - TWO (2) YEARSCONTACT NUMBER
1-800-211-PANA(7262)
1-800-211-PANA(7262)
1-800-272-7033
1-800-211-PANA(7262)
1-800-211-PANA(7262)
1-888-843-9788SERVICE
Carry-In or Mail-In
Carry-In or Mail-In
Carry-In or Mail-In
Carry-In or Mail-In
Carry-In: 21” CRT and
Smaller
In-Home or Carry-In:
22” CRT and Larger
In-Home or Carry-In
Batteries (if included) - New rechargeable batteries in exchange for defective rechargeable batteries for ten (10)
days. Non-rechargeable batteries are not warranted.
Tape (if included) - New video cassette tape in exchange for a defective video cassette tape for five (5) days.
Memory cards (if included) - Exchange defective item for new one for ninety (90) days.
In-home, carry-in or mail-in service, as applicable, in the USA can be obtained during the warranty period by
contacting a Panasonic Services Company (PASC) Factory Servicenter listed in the Servicenter Directory.
Or call toll free contact number listed above, to locate an authorized PASC Servicenter. Carry-in or mail-in service
in Puerto Rico can be obtained during the warranty period by calling the Panasonic Sales Company telephone
number listed in the Servicenter Directory.
This warranty is extended only to the original purchaser. A purchase receipt or other proof of the date of the original
purchase is requires before warranty service is rendered.
This warranty only covers failures due to defects in materials and workmanship, which occur during normal use and
does not cover normal maintenance, including, but not limited to, video and audio head cleaning. The warranty
does not cover damage which occurs in shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration,
modification, faulty installation, set-up adjustments, improper antenna, inadequate signal pickup, maladjustment of
consumer controls, improper operation, power line surge, improper voltage supply, lightning damage, commercial
use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than
a PASC Factory Servicenter or a PASC authorized Servicenter, or damage that is attributable to acts of God.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING,
WITHOUT LIMITATION, DAMAGE TO RECORDING MEDIA) RESULTING FROM THE USE OF THIS PRODUCTS,
OR ARISING OUT OF ANY BREACH OF THE WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so
the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may
also have other rights, which vary, from state to state. If a problem with this product develops during or after the
warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then
write to the Consumer Affairs Department at the Panasonic Consumer Electronics Company address above.
SERVICE CALLS WHICH DO NOT INVOLVE DEFECTIVE MATERIALS OR WORKMANSHIP AS DETERMINED
BY THE WARRANTOR, IN ITS SOLE DISCRETION, ARE NOT COVERED. COSTS OF SUCH SERVICE CALLS
ARE THE RESPONSIBILITY OF THE PURCHASER.
warvid 02/ 12/ 2001
Limited Warranty
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 37 
						

							38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Spanish Quick Use Guide/Guía para rápida consulta
CH AUTO SET PROCEEDING
             PROCEEDING         AUTO CLOCK SET 
CANCEL : PRESS STOP KEY
 2 /  6 / 2002   WED 12 : 00PMDST : ON
A
UTO  CLOCK   SET
COMPLETED
SETT I NG : CH 1 0
MENU  PR I NC I PAL
TVV
CRIDIOMA
CANALREL OJ SAL I R
F  I  JAR    : ACT I ON   ELEG I R : 
F I JAC I ON  AUTOMAT I CA
F I JAR   : ELEG I R :        TERM I NAR : ACT I ON
F I JAR  RELOJ
MANUAL
AJUSTE  ZONA  HORA  :  0 
SET             :        START         :  ACT I ON  SET  
CLOCK
DST : ONSESET COMPLETEDCOMPLETED
2 /   6/2 /   6/:20022002WEDWED12120000PMPM
1
2
Si el ajuste automático del reloj no se
ha completado, ajuste el reloj
manualmente de la siguiente manera:
1) Presione la tecla ACTION en el
control remoto para visualizar la
pantalla del menú RELOJ.
2) Presione  para seleccionar
el mes y 
 para ajustar. De la
misma forma, seleccione y
ajuste la fecha, año, hora y DST
(Hora de Verano).
3) Presione dos veces la tecla
ACTION para poner el RELOJ
en marcha y salir.
Ajustar de nuevo el reloj
1
Presione ACTION para exhiba
el menú.
Ajuste Manual del Reloj
2
Presione
  para
seleccionar
“RELOJ”.
Presione
ACTION.
3
Presione
 para
seleccionar
“MANUAL”
y luego
presione 
.
4
Presione
 y  para
seleccionar
y ajustar la
hora y la
fecha.
5
Presione ACTION dos veces
para que el reloj comience afuncionar y salir desde este
modo.
Connexiones/Configurcion Inicial
Conecte por favor todas las conexiones
del cable o de la antena antes de turing
potencia. Conectando el cordon AC de la VCR
en toma de pared iniciara automaticamente la
busqueda de canales y colocacion de tiempo
Para Ant./Cable
Conecte Ant./Cable a la entrada de
antena de la TV (VHF/UHF).
Para Sistema Digital de Satelite (DSS)/
Convertidor de cable
Conecte la salida del convertidor de cable la
VHF/UHF con el RF cable.
Conectando
Realizando Configuracion Inicial
Presione COMBO para modo del combo.
Tape el cable electrico de la unidad en el
enchufe de pared de la CA. POWER de
la prensa en el telecontrol o la unidad.
La unidad se adelanta y comienzo auto
del canal y del reloj.
   Si usa convertidor de
cable, enciendala y
seleccione el Servicio
Publico de Canales de
Television (PBS) en su
horario de uso o tiempo
de su zona. Si utiliza
receptor DSS este debe
de estar apagado.
Selecciones se
realizaran
automaticamente cuando
la configuracion termine,
la pantalla siguiente
aparecera.
Si AUTO CLOCK SET IS
INCOMPLETE aparece en
pantalla, coloque el tiempo
usando el procedimiento
manual (MANUAL CLOCK
SET), vealo enseguida..
F I JAR   : ELEG I R :                                                                         TERM I NAR : ACT I ON
ELEELEG I R    MESES
1 /     //     /:F I JAR  RELOJ
VERANO : ACT
Por ayuda, llame al : 1-800-211-PANA(7262) o  envie e-mail a : [email protected]
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 38 
						

							For Your Information
39
Operaciones básicas para la
reproducción
1
Inserte un casete. El videograbador combinado se enciende
automáticamente.
2

 

 


Para encontrar una escena en particular
Búsqueda hacia adelante => Presione FF
Búsqueda hacia atrás => Presione REW

 

 


Para ver una imagen fija (congelada) => Presione
PAUSE/SLOW

 

 


Para ver en cámara lenta => Mantenga pulsado el
botón PAUSE/SLOW en el modo de imagen fija

 

 


Para ver imágenes cuadro a cuadro => Presione
PAUSE/SLOW en el modo de imagen fija

 

 


Para parar => Presione STOP

 

 


Para rebobinar la cinta => Presione REW

 

 


Para hacer avanzar la cinta rápidamente =>
Presione FF

 

 


Para expulsar la cinta => Presione EJECT
en el control remoto o STOP/EJECT en el
videograbador combinado
Operaciones básicas para la
grabación
2
3
4
Comience la grabación.
Presione REC.
 Para editar partes no deseadas de una
grabación, presione PAUSE/SLOW para
hacer una pausa durante la grabación.
 No podrá ver otro canal durante la
grabación.

Para parar => Presione STOP.

 

 


El videograbador combinado deja
de grabar a una hora prefijada.
(Grabación de un toque)
Presione REC repetidamente para
ajustar la hora de grabación (30 min
- 4 horas.) Presione PLAY.
 La reproducción comienza
automáticamente si el casete no tiene la
lengüeta para prevención de grabación.
1
Inserte un casete con la lengüeta
para prevención de grabado.
 El videograbador combinado se enciende
automáticamente.
Seleccione el canal.
Presione CH  o las teclas
numéricas correspondiente.
Seleccione la velocidad de grabación.
Presione SPEED.
SP = reproducción normal
LP = reproducción larga
SLP = reproducción super larga
 La velocidad seleccionada debe aparecer
en la pantalla.
Grabaci—n normal0:301:00
1:302:003:004:00
Grabación con temporizador
1
Exhiba FIJAR PROGRAMACION.
Presione PROG.
Exhiba
TEMPORIZADOR.
1) Presione 
para seleccionar.
2) Presione 
 para
exhibir.
2
Repita el paso 3 para ajustar:
hora de comienzo, hora de parada, canal
(o LINEA para una fuente exterior), velocidad
(SP, LP, SLP)
Ajuste la fecha de
grabación.
1) Presione 
para seleccionar.
2) Presione 
 o para ajustar.
3
5
Salga de este modo.
Presione PROG dos veces (o
ACTION.)
 Si está usando un decodificador de TV
cable, asegúrese que se encuentra en el
canal deseado y que la alimentación
queda conectada para grabar con
temporizador.
 El indicador PROG TIMER se enciende
en el videograbador combinado.
ELEGIR FECHA DE INICIOELEGIR FECHA DE INICIO
7    VIE  VIE   --:--  --:-- --:--  --:--   ----HOY FECHA INICIO PARADA
CA
SLP
- - - - - - - - -- - - - - - - -- - - - - - - 
F I JAR   :ELEG l R :   TERM l NAR : PROG / ACTION
4
Termine el
programa.
Presione PROG
(o ACTION.)1P  FE     I N I C  PARADA  CA  VEL
2  -- -- : --   -- : --  --  --3  -- -- : --   -- : --  --  --4  -- -- : --   -- : --  --  --
ELEG I R   1-8 :                CANCELAR : ADD/DLT    ENTRAR :    TERM I NAR :  PROG / ACT I ON 
D I     9I     9 : 0000p 12p 12 : 0000a
08     SP08     SP
 Si ya existe un programa en la memoria,
presione  y  para seleccionar un número
de programa sin usar.
 1 - 31 = Grabación única
 DIARIO = a la misma hora de lunes a viernes
 SEMANAL = a la misma hora una vez a la
semana
Fecha de hoy
F I JAR   :ELEG l R :                                                   
F I JAR  PROGRAMAC I ON
TETEMPMPOR l ZADORZADORENCENDIDO AUTOMATICO
TERM l NAR : PROG
Para introducir más programas.
presione  y  para seleccionar y
ajustar el número de programa en
blanco, y luego repita los pasos 3 y 4.
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 39 
						

							AAccessories ................................................ 3
Audio Mute ................................................ 14
Auto Operation Functions ......................... 25
BBatteries....................................................... 3
Before Requesting Service .......................... 35
Blocking Message ....................................... 31
Blue Screen Display .................................... 34
CCable Box Universal Remote Feature .... 32,33
Caption On Mute ......................................... 19
Channel............................................ 8 -13, 34
Channel Caption.......................................... 28
Clock .......................................................... 10
Closed Caption........................................... 18
Commercial Skip......................................... 26
Connections.................................................. 8
Connections, DSS / Cable Box ...................... 8
Connections, Antenna / Cable ....................... 8
Copy Your Tapes (Dubbing) ....................... 13
DDST (Daylight Saving Time) .......................... 4
EEject tape .................................................... 12
FFast Forward .............................................. 12
FM Radio .................................................... 20
Forward Search .......................................... 12
Frame by Frame Advance .......................... 12
Front Panel Indicators ................................... 7
Function Display ......................................... 34
HHead Cleaning.............................................. 4
IImportant Safeguards and Precautions ......... 2
Index Search .............................................. 24
Initial Setup................................................... 8
Input Mode.................................................. 13
Instant Alarm ............................................... 17
LLanguage .................................................... 10
Limited Warranty......................................... 37
Location of Controls ................................ 6  -  7
MMTS Broadcast / TV Stereo System ......... 15
       (For Model PV-2062 only)
NNIGHT Mode .............................................. 14
O100 Key ...................................................... 14
One Touch Recording ................................. 12
ON-TIMER with Alarm ................................. 16
PPhones .................................................. 14
Playback ............................................... 12
Picture Adjustment ................................ 21
Program End Search ............................ 24
QQuality Picture ......................................... 4
RRapid Tune ............................................ 14
Rec(ord) ................................................ 12
Record/Playback Speed Settings ............. 4
Remote Control Buttons ........................... 6
Remote Warning ON/OFF ...................... 28
Repeat Play ........................................... 26
Reset Language, Channels, Clock ......... 10
Reset unit ................................................ 9
Reverse Search ..................................... 12
Rewind ................................................... 12
SSecret Code ........................................... 29
Servicenter List ...................................... 36
Sleep Timer............................................ 17
Slow Motion ............................................ 12
Spanish Quick Use Guide ................. 38, 39
Special VCR Features ....................... 27, 28
Specifications........................................... 4
Still Picture............................................. 12
STOP.................................................... 12
TTape Erasure Prevention ......................... 3
Tape Position Display ............................. 25
Time Zone Adjust ................................... 11
Timer Program Review, Replace, Clear . 23
Timer Recording .................................... 22
Timer Recording Cancellation ................ 23
TV Operation ......................................... 14
TV Timer Features ............................ 16, 17
UUnit, Front/Rear view ............................... 7
US MOVIES/TV PROGRAMS Ratings ... 31
VVCR Lock .............................................. 27
VCR Status & Clock Display .................. 34
V-Chip Control Feature ................... 29  -  31
WWarning and Instruction Displays ........... 34
Weak Signal Display ON/OFF ................ 27
ZZero Search ........................................... 26
INDEX
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Printed in U.S.A
LSQT0582A
M0901-0
PLSQT0582A
LSQT0582A_P34-40.p6512/14/2001, 1:56 PM 40