Panasonic Compact Disc Recorder Sl Pr300 Operating Instructions

English
21
RQT6087
Listening to CDs
7Press the CD Control PLAY 
p button to start 
programmed play.
During playback, the disc number, track number and play time
of the track are shown in the information display.
The numbers of the tracks that have been played are cleared
from the music calendar. They are displayed again when pro-
grammed play is completed.
Operation stops automatically (and “STOP” is shown in the
information display) when all of the programmed tracks have
been played.
If the CD...

22
RQT6087
Listening to CDs
6Select a track number (1-99)  using the R 
(reverse) or F (forward) buttons, and then 
press the SET button.
7Repeat steps 5 and 6 to program up to a 
maximum of 32 steps.
If you try to program over 32 steps, “MEMORY FULL” will be
shown in the information display, and the programming func-
tion ends automatically.
Pressing the s (stop) button ends the programming function.
8Press the p
 button to start program play.
During playback, the disc number, track number and play...

English
23
RQT6087
Recording onto CD-R/RW Discs
Notes on Recording
Do not use CD-R or CD-RW discs with dust and/or scratches on
the surface as this may cause the recording to sound rough and
may cause skipping when played backed. It may even cause the
unit to malfunction.
When using a recording function (one of the recording indica-
tors in the display window is illuminated), do not subject the
unit to any shock or vibration.
Before recording on a CD-R disc, it is recommended to make a
sample...

24
RQT6087
Recording onto CD-R/RW Discs
To disable/enable the Add Finalize feature with the 
remote control
1Press the MENU button.
2Press the P
 or p
 button to select FINALIZE.
3Press the SET button.
4Press the P
 or p
 button to select OFF or ON.
5Press the SET button.
Analog recording level adjustment
When recording analog signals, and the main unit is recording or
stopped in the recording pause mode, after pressing the MENU
button on either the main unit or remote control, the recording level
can be...

English
25
RQT6087
Recording onto CD-R/RW Discs
3Press 
1REC/REC MUTE to put the CDR in 
recording pause mode.
The disc is read and OPC performed if required.
The remaining recording time on the CD-R or CD-RW disc is
shown in the information display.
4When analog signals are to be recorded, adjust 
the recording level while playing the source.
The OVER indicator should not be made to light as this may cause
distortion in the recording.
When CD ANALOG recording is selected, the recording level
is set...

26
RQT6087
Recording onto CD-R/RW Discs
AUTO TRACK  fu nctio n o ff
Manual track marking offers you the flexibility of placing track
marks anywhere you like in the recording. 
Manual track marking is not possible when the AUTO TRACK
function is on.
To add track marks automatically
1When the unit is in the stop mode, press the 
MENU button (main unit/remote control).
2Turn the MULTI JOG control or press the P
/p 
(menu) button on the remote control until 
“AUTO TRACK” is shown in the information...

English
27
RQT6087
Recording onto CD-R/RW Discs
1Select and stop the CD to be recorded.
Example: To record the CD loaded in tray DISC1.
Only the selected CD is recorded.
2Load a recordable CD-R or CD-RW disc into the 
CDR and close the tray.
The disc is read if required.
3Press the CD REC button (main unit/remote 
control) to start recording. “DISC DUBBING” is 
shown in the information display
When a blank disc is in the CDR tray, “UPDATE OPC” is
shown following “DISC DUBBING”.
When “ADD FINALIZE?” is...

28
RQT6087
Recording onto CD-R/RW Discs
1Select a disc and start playback.
Example: When planning to record a track on DISC1 
2Insert a recordable CD-R or CD-RW disc in the 
CDR disc tray.
The disc is read.
3While the disc is playing back the track you 
want to record or if that track is being paused, 
press CD REC (main unit/remote control).
“1TR DUBBING” is shown in the information display.
When a blank disc is in the CDR tray, “UPDATE OPC” is
shown following “1TR DUBBING”.
When “ADD FINALIZE?” is...

English
29
RQT6087
Recording onto CD-R/RW Discs
“DISC DUBBING?” is shown in the information display.
When a blank disc is in the CDR tray, “UPDATE OPC” is
shown following “DISC DUBBING”.
The 3-CD changer and CDR start simultaneously.
Recording starts from the first track of the CD.
When recording completes, “STOP DUBBING” flashes and
recording automatically stops.
Notes 
Recording can only start if the total time of the tracks on the
source disc is less than the time remaining on the disc being...

30
RQT6087
Recording onto CD-R/RW Discs
When “ADD FINALIZE?” is shown in the information 
window:
No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Notes
This message will be shown if the menu FINALIZE function
setting is “ON”. The default setting is “OFF”.
When a blank disc is in the CDR tray,...