Panasonic Cpc+AII/B Digital Business System Release Notes Manual

DBS Release NotesCPC-EX, Version 1 .O (Preliminary)
The new DSS key arrangement is shown in Figures 7 & 8.Figure 7.
DSS/72 Console (VB-44320) key layout
DW72 Key Layout (alphabetical)
Panasonlo
Panasonic@June 
lo,1996
DSS/72 Key Layout (FF-key numbering)
Page 24 l44-Series New Phone Features 

Panasonic@June 
lo,1996Figure 8.
DSSi72 #I Default Extension NumbersDSS 
#I Default Extension Numbers
DES Release Notes
CPC-EX, Version 1 .O (Preliminary)
Panasonio
ProgrammingThe DSS/72 console (DSS #l . . . DSS #4) is assigned to its extension number in the
same manner as before:
Terminal Type:FF3 (ExtPort)# 2# (11114)#
where...
l11 is the first DSS console for the first attendant
l12 is the second DSS console for the first attendant
l13 is the first DSS console for the second attendant
l14 is the...

DBS Release NotesPanasonic@CPC-EX, Version 1 .O (Preliminary)June 
lo,1996
The DSS/72 console’s FF-keys are assigned feature codes in the same manner as
before (the only difference is the numbering arrangement of FF-keys l-72):
FF Key Assignments:FF5 (DSSPort)# CONF (I-72)# (Code)#
The Name and Message Assignment addresses work the same way as before on
the 
DSS/72 console (the only difference is the placement of the keys when
entering the characters of the text):
Extension Name: FF6 I# (ExtPort)# CONF...

Panasonic@DBS Release Notes
June lo,1996CPC-EX, Version 1 .O (Preliminary)Figure 9.
EM124 Unit (VB-44310) keys
ProgrammingThe terminal type for the EM/24 is specified in the same manner as before:Terminal Type: FF3 (EM/24 ExtPort)# 
2# (1148)#
The EM/24 unit is linked to its extension phone in the same manner as before:
EM/24 Port Assignment:FF3 (EM/24 ExtPort)# 3# (phone ExtPort)#
The EM/24’s FF-keys are assigned feature codes in the same manner as before (the
only difference is the numbering...

DBS Release Notes
CPC-EX, Version 1 .O (Preliminary)Speed-Dial Enhancements
Description
Programming
Panasonic@June 10.1996
The CPC-EX supports up to 500 SSD numbers (code range 000-499) for each
system, and up to 10 PSD numbers (code range 900-909) for each extension.
With CPC-EX, you can chain up to 4 SSD codes together within a fifth SSD
number.You can also chain up to 4 SSD or PSD codes together within a fifth PSD
number. You can include both speed-dial codes and regular dialed numbers into
the same...

Panasonic3
June 
10.1996DBS Release Notes
CPC-EX, Version 1 .O (Preliminary)
11.Assianina SSDs from the atjtendant phone
to assign a System Speed Dial number from the attendant phone...
1. Press ON/OFF.2. Press PROG.
3. Press AUTO.
4.Enter the SSD code (000-499).
5.Enter the number to be dialed.6. Press HOLD.
7. Press ON/OFF.
EXAMPLE: To chain together SSD code 000 (CPPause), SSD code 001
(10288-Pause), and SSD code 002 (555-12 12) within SSD code 003...
1.Program SSD code 000 to dial “C9-Pause”:
a.Press...

DBS Release Notes
CPC-EX, Version 1 .O (Preliminary)Panasonic@June lo,1996Figure 12.
Assigning PSDs from programming mode
to assign a Personal Speed Dial number from programming mode...
FFlO 2# (ExtPort)#(900-909)#(up to 16 digits)#
EXAMPLE: To chain-dial SSD code 001 and PSD codes 901-902 together into
PSD code 909 on extension port 
033...
FFlO 2# 033# 909# AUTO 001 AUTO 901 AUTO 902#
3-Digit PSD CodeValid Entries(using a DSS console):
o-9
(digits O-9)
CONF(to clear data)
c or BS(to backspace)
c
(to...

Panasonic@June 
lo,1996
NotesDBS Release Notes
CPC-EX, Version 1 .O (Preliminary)1) Chain-Dialing Limitations and Restrictions:
lYou cannot chain-dial any PSD.codes within an SSD number, because the
system would not be able to choose which extension to take the PSD code
from (the same PSD code might exist on multiple extensions).
lYou cannot “chain-within-a-chain”. For example:
-- SSD Code 001 = AUTO 
002(will not dial outq returns busy tone instead)
-- SSD Code 002 = AUTO 
003(will dial out)
-- SSD Code...

DBS Release NotesPanasonic@
CPC-EX, Version 1 .O (Preliminary)
June lo,1996
Additional Serial Port on CPC Card
DescriptionThe CPC-EX card contains an on-board serial port (Serial Port 2) which can be
used for Bus Monitor/ Remote Maintenance. This serial port (labeled CN5) is
located just above the LEDs on the front of the card (see the illustration on page 8).
This additional serial port allows you to dial directly into the system for remote
maintenance, without having to disconnect the SMDR cabling...

Panasonic@June 
lo,1996
DBS Release Notes
CPC-EX, Version 1 .O (Preliminary)
ProgrammingThe following new addresses apply to CPC-EX Serial Port 2. (The addresses that
control the SMDR port remain at FW 2# 2# l# thru 9#.)
to program the DBS to perform Parity Check on Serial Port 2...
FFl 2# 2# 11# (Oorl)#
O=Parity check OFF
l=Parity check ON
to specify Parity Count for Serial Port 2 (if Parity Check is ON in the
above address)...
FFI 2# 2# 12# (0 or I)#
t
O=Odd paritjl count,
l=Even parity count
Ito...