Panasonic Cz Rd515u Operating Instructions Manual

Operating Instructions
CZ-RD515U (852-6-4181-230-00-1)
APPENDIX A
A-1 

Wired Remote Controller
Model No.CZ-RD515U
Operating Instructions
Panasonic Corporation 1006 Kadoma, Kadoma City, Osaka, Japan
85264181230001CV6233187877
This wired remote controller is designed for  
both the “COOL/DRY/HEAT Model” and  
“COOL/DRY Model” indoor unit. Once the wired remote controller is  
connected, the wireless remote controller  cannot be used.
Before operating the unit, read these operating instructions thoroughly and keep them for future reference. 

2
FEATURES
 Microprocessor Controlled Operation The interior compartment of the remote controller c ontains several 
features to facilitate automatic operation, easy lo gically displayed 
for easy use.
 24-Hour ON or OFF Timer This timer can be set to automatically turn the uni t on or off at any 
time within a 24 hour period.
 1-Hour OFF Timer This timer can be set to automatically turn off the  unit at any time 
after one hour.
 Night Setback This function saves energy by controlling operation  to...

3
INSTALLATION LOCATION
We recommend that this wired remote controller be  
installed properly by qualified installation techni cians 
in accordance with the Installation Instructions 
provided with the unit. 
Avoid:  
To protect the air conditioner from heavy corrosion , avoid installing 
the outdoor unit where salty sea water can splash d irectly onto it or 
in sulphurous air near a spa.
ELECTRICAL REQUIREMENTS
1. All wiring must conform to the local electrical cod es. 
Consult your dealer or a...

4
REMOTE CONTROLLER
Display
Information on the operating conditions is displayed while the remote 
controller is switched on. If the unit is turned of f, only the mode that was set 
previously is still displayed.
FAN SPEED selector button
: The air conditioner automatically decides the fan  speeds.
: High fan speed 
: Medium fan speed 
: Low fan speed
FLAP button
Press this button either to select the setting of t he airflow direction to one of 
the six possible positions manually or to select th e sweep...

5
Sensor
A temperature sensor inside the remote controller senses the room temperature.
ON/OFF operation button
This button is for turning the air conditioner on and off.
1 HR. TIMER button (1-HOUR OFF TIMER)
:  When you press this button, regardless of whether  the unit is operating or stopping, the unit operates for 
one hour and then shuts down.
MODE selector button
Use this button to select AUTO, HEAT, DRY, COOL or  FAN mode.
(AUTO) :  When this setting is selected, the air conditione r calculates...

6
REMOTE CONTROLLER (DISPLAY)
(1) Operation mode AUTO ..................................... 
(only for COOL/DRY/HEAT  
Model) 
HEAT ...................................... 
(only for COOL/DRY/HEAT 
Model) 
MILD DRY .............................. 
COOL ..................................... 
FAN ........................................
(2) Fan speed Automatic operation ............... 
HIGH  .....................................
MEDIUM.................................
LOW...

7
OPERATION WITH THE REMOTE CONTROLLER
1.  Automatic Operation (only for COOL/DRY/HEAT Model)
 Single use This unit automatically switches between cooling op eration and 
heating operation according to the difference betwe en the room 
temperature and the temperature setting.
 Multiple use
The air conditioner calculates the difference betwe en the 
thermostat setting and room temperature, and automa tically 
determines the mode to operate under cooling or hea ting. Then, 
the air conditioner...

8
3.  Adjusting the Fan SpeedA. Automatic fan speed
Simply set the FAN SPEED selector button to the    
position.
This automatically sets the best fan speed for the  room 
temperature.
B. Manual fan speed
If you want to adjust fan speed manually during ope ration, 
just set the FAN SPEED selector button as desired.  [ , 
, or  ]
4.  Fan Only 
5.  Night Setback Mode 
Night Setback Mode is used for saving energy. 
Press the NIGHT SETBACK button while unit is operat ing. 
The   mark appears in the display....

9
SETTING THE TIMER
1.  How to set the present time 
(Example) To set to 9:10 pm. 
2.  How to set the OFF time 
(Example) To stop the air conditioner at 11:30 pm. 
To cancel the setting, press the TIMER SELECT butto n twice.3. How to set the ON time 
(Example) To start operation at 7:10 am. 
To cancel the setting, press the TIMER SELECT butto
n three times.
4. How to set daily ON/OFF repeat timer 
(Example) To start operation at 7:10 am. and stop t he air conditioner 
at 11:30 pm. 
To cancel the setting,...