Panasonic Cz Rtc3 Operating Instructions Manual

Panasonic Corporation
1006 Kadoma, Kadoma City, Osaka, Japan
Operating Instructions
High-spec Wired Remote Controller
Model No. CZ-RTC3
Installation Instructions
Separately Attached.
ENGLISHBefore operating the unit, read these operating instructions thoroughly and keep them for future 
reference.
81405230169000G0114-0
CV6233312187
WEB-URL Panasonic Corporation 
 Website:http://panasonic.net/ 

2(EN)
Part Names Control panel
Note
LCD screen   Return button
Returns to the previous screen.Menu buttonDisplays the menu 
screen (P. 10).
Operation indicatorIlluminates during operation.
Blinks during alarm. 
Start/Stop buttonStarts/Stops operation.
Enter buttonFixes the selected content.
Press centre No glove No pen
Energy saving 
button
Switches Energy 
saving/Normal 
operation.
Cross key buttonsSelects an item.Up
DownRight Left 

3(EN)
Safety Precautions
CAUTIONS
This appliance is intended to be used by expert or 
trained users in shops, in light industry and on farms, or 
for commercial use by lay persons.
This appliance can be used by children aged from 8 
years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience 
and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe 
way and understand the hazards involved.
WARNING
Do not use...

4(EN)
Note:
  This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.
  This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against...

5(EN)
Preparations How to UseSetting ChangeWhen 
NecessaryPage
Thank you for purchasing the 
Panasonic high-spec wired remote 
controller.
 
 Read the Operating Instructions 
carefully for safe use. This 
manual describes the Operating 
Instructions of the wired remote 
controller. Read this manual as 
well as operating instructions 
supplied with indoor units and 
outdoor units.
 
 Be sure to read the “Safety 
Precautions” (P.3, 4) before 
using.
 
 Keep this manual with operating 
instructions...

6(EN)
Top screen
  Operation stop 
screen   Item selection 
screen   
Lock screen display
Remote controller 
name (P.34)Operation is locked. 
(P.33)Present time & 
day (P.33)
Setting 
information 
icon
When 
checking the 
meanings 
of all icons 
(P.39)
Operation guide (P.7) Cursor Operation 
mode
Set temperature Fan speed Flap
[Operation lock] is functioning.
(P.33)
  To cancel lock
Press 
 button for 
4 seconds. The indoor unit is stopped or slight blow operation is in process. When 
inspection 
is...

7(EN)
Menu screen (P.10)
Screen name Present time & day
The currently operable content is simply 
displayed.
• ▲▼◄►: Cross key buttons
• 
: Enter button
Icon Description Page
The indoor unit fi lter needs to be cleaned. P.20
The engine oil needs to be replaced.
(Only when using a gas heat pump air conditioner.)-
Switching operation modes is prohibited.
(Switching to Auto mode is also prohibited.)-
Remote control operation is restricted by a central control device. -
[ON/OFF timer] is set. P.14
[Weekly...

8(EN)
Basic Operations
1
Start operation.
Press 
.(The operation indicator illuminates.)
 
 To change the setting(P.10)
 
 To turn the energy saving 
operation ON/OFF
Press during operation.
(Only for models equipped with the 
energy saving function.)
 
 To stop(The operation indicator turns off.)
2
Select the item to set.
Press ◄  ►.
3
Change the setting.
Press ▲▼  →  .
(The cursor disappears.)
Energy saving operation 
is in process.
Operation indicator
Note
 
 Operation modes that cannot be set are...

9(EN)
Perform the following operations in step 2 on page 8.
  Operation mode (e.g. Cool, Heat, etc.)
Press ◄.
* Auto: 
The mode is 
automatically 
switched to 
Cool or Heat to 
achieve the set 
temperature.↓Heat
Dry
Cool
Fan
Auto
  Set temperature
Press . (When the cursor is not 
visible)
• Cool/Dry : 18 °C to 30 °C
• Heat  : 16 °C to 30 °C
• Auto  : 17 °C to 27 °C
  Fan speed
Press ►.
  Flap
Press ► 2 times.
  Flap Setting for Each Indoor 
Unit
 (P.12)
•  : Swing
• Pressing ▲▼ 
during swing can...

10(EN)
1
Display the menu screen.
  To return to the previous screenPress .
  When no operation is performed 
in each setting screen for several 
minutes
The display returns to the top screen.
2
Select the menu item.
▲ ▼ → 
  To turn the pagePress ◄ ►.
  Selectable menus (1 to 13)
For details of screen examples, 
see the next page.
Menu List