Panasonic Digital Camera Dmc Lx100 Owners Manual For Advanced Features

							261SQW0021
Wi-Fi
Using “LUMIX CLUB”
To set the same login ID for the camera and the smartphone
 • Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or WEB services.
 ■When either this unit or the smartphone has acquired the login ID
  Connect this unit to the smartphone (→229)  From the “Image App” menu, set the common login ID • The login IDs for this unit and the smartphone become the same. • After connecting this unit to the smartphone, the setup screen for a common login ID may appear when you display the playback screen. Y ou can also set a common login 
ID by following the on-screen instructions.
 • This operation is not available for [Wi-Fi Direct] connection.
 ■When this unit and the smartphone have acquired different login IDs
When you want to use the smartphone’s login ID for this unit
Change the login ID and password for this unit to those acquired by the smartphone.
When you want to use this unit’s login ID for the smartphone
Change the login ID and password for the smartphone to those acquired by this unit.
Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Terms of use] • The camera will connect to the network and the terms of use will be displayed.       
						

							262SQW0021
Wi-Fi
Using “LUMIX CLUB”
Delete your login ID and account from the “LUMIX CLUB”
Delete the login ID from the camera when transferring it to another party or disposing of it. 
You can also delete your “LUMIX CLUB” account.
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Delete account] • The message is displayed. Press [MENU/SET].
3Select [Yes] in the login ID delete confirmation screen • The message is displayed. Press [MENU/SET].
4Select [Yes] on the confirmation screen for deleting the “LUMIX CLUB” account • If you want to continue using the service, selecting [No] will only delete the login ID. Exit the menu after it is executed.
5Press [MENU/SET] • The login ID is deleted, and then the message notifying the deletion of your account is displayed. Press [MENU/SET].
 ●Changes and other actions to login IDs can only be made to the login ID acquired with the camera.      
						

							263SQW0021
Wi-Fi
About connections
After selecting the Wi-Fi function and sending destination, select the connection method. 
If you are out and unable to use your wireless access point, or temporarily connecting to 
equipment you do not ordinarily use, or in a similar situation, it is convenient to make a 
direct connection. 
If you are connecting with the same settings as used previously, you can quickly start 
using the Wi-Fi function by connecting with [Select a destination from History] or [Select a 
destination from Favorite].
Wireless access point
Connection method Description
[Via Network] Connects through a wireless access point. (→264)
[Direct] Your equipment connects directly to the camera. (→267)      
						

							264SQW0021
Wi-Fi
About connections
[Via Network]    Connecting via a wireless access point
Select a connection method to the wireless access point. • WPS refers to a function that allows you to easily configure the settings related to the connection and security of 
wireless LAN devices. T
o check if the wireless access 
point you are using is compatible with WPS, refer to the 
instruction manual of the wireless access point.
Connection method Description
[WPS (Push-Button)] Save push button type wireless access point that is compatible with 
Wi-Fi Protected Setup™ with a WPS mark.
1Press the wireless access point WPS button until it 
switches to WPS Mode
 • Refer to the wireless access point instruction manual for details.
[WPS (PIN code)] Save PIN code type wireless access point that is compatible with 
Wi-Fi Protected Setup with a WPS mark.
1Select the wireless access point you are connecting to
2Enter the PIN code displayed on the camera screen 
into the wireless access point
3Press [MENU/SET]
 • Refer to the wireless access point instruction manual for details.
[From List] Select this option when you are not sure about the WPS compatibility
, 
or when you want to search for and connect to a wireless access 
point.
 • For details (→265)

.      
						

							265SQW0021
Wi-Fi
About connections
If you are not sure about the WPS compatibility 
(connecting by [From List])
Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted.
 • When connecting by [Manual Input], confirm SSID, network authentication type,  encryption type, encryption key of the wireless access point you are using.
1Select the wireless access point you are connecting to • Pressing [DISP.] button will search for a wireless access point 
again.
 • If no wireless access point is found, refer to “When connecting with [Manual Input

]” (→266).
2(If network authentication is encrypted)Enter the encryption key • For details on how to enter characters, refer to “Entering T ext” (→52).      
						

							266SQW0021
Wi-Fi
About connections
 ■When connecting with [Manual Input]
  On the screen of step 1 of “If you are not sure about the WPS compatibility 
(connecting by [From List])”, select [Manual Input] (→265)
  Enter the SSID of the wireless access point you are connecting to, then select [ Set] • For details on how to enter characters, refer to “Entering Text” (→52).  Select the network authentication type • For information on network authentication, see the instruction manual of the wireless access 
point.
  Select the encryption type • The type of settings that can be changed may vary depending on the details of network authentication settings.
Network authentication type Encryption types that can be set
[WPA2-PSK] / [WPA-PSK] [TKIP] / [AES]
[Common Key] [WEP]
[Open] [No Encryption] / [WEP]
(When an option other than [No Encryption] is selected)
  Enter the encryption key
 ●Check the wireless access points instruction manual and settings when a saving wireless access 
point.
 ●If no connection can be established, the wireless access point’s radio waves may be too weak. 
Refer to “Message displays”  (→299) and “Q&A Troubleshooting”  (→310) for details.
 ●Transmission speed may decrease, or may not be usable depending on the environment it is used 
in.      
						

							267SQW0021
Wi-Fi
About connections
[Direct]    Connecting directly
You can select the connection method to your equipment. 
Select a connection method with which your equipment is 
compatible.
Connection methodDescription
[Wi-Fi Direct]
*1
1Set the device to Wi-Fi Direct™ mode
2Select [Wi-Fi Direct]
3Select the device to connect to
 • Read the operating instructions of your device for details.
[WPS Connection
]
*2
[WPS (Push-Button)]
1Select [WPS (Push-Button)]
2Set the device to WPS mode
 • You can wait longer for a connection by pressing the  [DISP .] button on this unit.
[WPS (PIN code)]
1Select [WPS (PIN code)]
2Enter the PIN code of the device into this 
unit
[Manual Connection]
1Enter the SSID and password into the 
device. The SSID and password are 
displayed on the connection waiting 
screen of this unit.
SSID and Password QR Code
 • If the transfer destination is [Smartphone

], you can 
read the QR Code with your smartphone to connect. 
(→229)
*1   To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the device must be 
compatible with Wi-Fi Direct™.
*2   WPS refers to a function that allows you to easily configure the settings related to the connection 
and security of wireless LAN devices.      
						

							268SQW0021
Wi-Fi
About connections
Connecting quickly with the same settings as used previously
([Select a destination from History] / [Select a destination from 
Favorite])
The camera keeps a History of times you used the Wi-Fi function. You can register items 
in the History to Favorite. 
You can easily connect with the same settings as used previously by connecting from 
History or Favorite.
1Press [Wi-Fi] button
2Select [Select a destination from History] or [Select a 
destination from Favorite]
Item Description
[Select a destination from 
History] Connects using the same settings as 
used previously.
[Select a destination from 
Favorite] Connects using settings registered in 
Favorite.
3Select the desired connection setting
Registering History items to Favorite
1Press [Wi-Fi] button
2Select [Select a destination from History]
3Select the item you wish to register and press 
4Enter a registration name • For details on how to enter characters, refer to “Entering T
ext” (→52). • Up to 30 characters can be entered. A
 double-byte character will be treated as two characters.       
						

							269SQW0021
Wi-Fi
About connections
Editing items registered in Favorite
1Press [Wi-Fi] button
2Select [Select a destination from Favorite]
3Select the Favorite item you wish to edit and press 
4Select item
ItemDescription
[Remove from Favorite] —
[Change the Order in Favorite] Select the destination
[Change the Registered Name]
 • For details on how to enter characters, refer to “Entering T

ext” 
(→52).
 • Up to 30 characters can be entered. A

 double-byte character 
will be treated as two characters. 
Registering and saving frequently used Wi-Fi connection settings to 
Favorites
 ●The number of settings that can be saved in the history is limited. W e recommend that 
you register and save frequently used Wi-Fi connection settings to Favorite.  (→268)
Checking connection details of History or Favorite
 ●When selecting History or Favorite items, you can view connection details by pressing 
the [DISP.] button.
 ●Performing [Reset Wi-Fi Settings] deletes content registered in History and Favorite.  ●When using [Select a destination from History] or [Select a destination from Favorite] to connect to 
a network to which many PCs are connected, it may be difficult to make the connection because 
the camera searches for previously connected equipment out of a large number of equipment 
pieces. If you cannot connect, retry the connection using [New Connection].      
						

							270SQW0021
Wi-Fi
About connections
Settings for sending pictures
When sending pictures, first select [New Connection], then 
select the method of sending pictures. 
After you have completed connecting, you can also change 
the sending settings, such as the size of pictures to be sent.
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
 ●[  ] is displayed on the recording screen while connected by [Send 
Images While Recording], and [  ] is displayed while files are being 
sent. 
 ●If you turn off the camera before you have completed sending, or if 
you close the Wi-Fi connection, or in similar situations, unsent files 
will not be resent.
 ●You may not be able to delete files or use the [Playback] menu 
while sending.
00720072
Not available in the following case:
 ●Motion pictures cannot be sent.
[Send Images Stored in the Camera]
You can select and send recorded images.
 ●Details of the [Playback] menu [Favorite] or [Print Set] settings will not be sent.
Not available in the following cases:
 ●Some images taken with a different camera may not be able to be sent. ●Images that have been modified or edited with a computer may not be able to be sent.