Home
>
Panasonic
>
Digital Camera
>
Panasonic Digital Camera Dmc Lz20 Owners Manual For Advanced Features
Panasonic Digital Camera Dmc Lz20 Owners Manual For Advanced Features
Have a look at the manual Panasonic Digital Camera Dmc Lz20 Owners Manual For Advanced Features online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

- 51 -VQT4K59 Using Zoom Recording mode: You can adjust the area of a picture to be taken using zoom. Zoom In/Out Capture a wider area (wide-angle)Enlarge the subject (telephoto) 2.0ft 2.0ft --7.1X When Extended optical zoom is set Optical Zoom range Zoom barDigital Zoom range Zoom ratio Focus range ●Adjust the focus after adjusting the zoom. ●Do not touch the lens barrel during zooming. ●The zoom ratio and the zoom bar displayed on the screen are estimates. ●The camera may make a rattling noise and vibrate when the zoom lever is operated - this is not a fault.

- 52 -VQT4K59 Using Zoom Zoom types and use The zoom ratio changes when the picture size is changed. (→73) ■Optical Zoom Zooming in up to 21x is possible if pictures without have been selected by [Picture Size] on the [Rec] menu. ●Optical Zoom cannot be used in the following cases: • Scene Mode ([Panorama Shot]) • [Macro Zoom] ■Extended optical zoom Zooming in up to 48.5x is possible when pictures with have been selected by [Picture Size] on the [Rec] menu. EZ is short for “Extended optical zoom”. ●Extended optical zoom cannot be used in the following cases: • Motion picture • Scene Modes ([Panorama Shot] [High Sens.]) • When the [Burst] setting is set to • [Macro Zoom] To increase the zoom ratio further, the following zoom can be used in combination. ■[Digital Zoom] Zoom 4x further than Optical/Extended optical zoom. Note that, with Digital Zoom, enlarging will decrease picture quality. Set the [Digital Zoom] in the [Rec] menu to [ON]. (→79) ●Digital Zoom cannot be used in the following cases: • [Intelligent Auto] Mode • Scene Modes ([Panorama Shot] [High Sens.]) • When the [Burst] setting is set to

- 53 -VQT4K59 Taking pictures with flash Recording mode: ■To open the flash Press • Be sure to close the flash when not in use. ■To close the flash Press the flash until it clicks. • The flash setting is fixed to [Forced Flash Off] while the flash is closed. Flash open button ●Be careful not to catch a finger when closing the flash. (Continued on the next page)

- 54 -VQT4K59 Taking pictures with flash Press to display [Flash] Use cursor button to select the desired type and press [MENU/ SET] Type, operationsUses *1[Auto] • Automatically judges when to use flash Normal use [Auto/Red-Eye]*2 • Automatically judges when to use flash (reduce red-eye) Taking pictures of subjects in dark places [Forced Flash On] • Always flash Taking pictures with backlight or under bright lighting (e.g. fluorescent) [Slow Sync./Red-Eye]*2 • Automatically judges when to use flash (reduce red-eye; slow shutter speed to take brighter pictures) Taking pictures of subjects against a nightscape (tripod recommended) *1 Only in the mode*2 Two flashes will be emitted. Do not move until after the second flash. If [Red-Eye Removal] on the [Rec] menu is [ON], the appears with the flash icon, red-eye is automatically detected and still picture data is corrected. (Only when [AF Mode] is (Face Detection)) (Continued on the next page)

- 55 -VQT4K59 Taking pictures with flash ●The effect of red-eye reduction varies depending on the subject and is affected by factors such as distance to the subject, whether the subject is looking at the camera during preliminary flash, and so on. In some cases, the effect of red-eye reduction may be negligible. ●Do not put your hands over the light-emitting area of the flash or look at it from close range (a few centimeters away). Do not use the flash at close distances to other subjects (heat/light may damage subject).Flash ●Flash settings may be changed when changing recording mode. ●Scene Mode flash settings are restored to default when Scene Mode is changed. ●Edges of picture may become slightly dark if using flash at short distances without using zoom (close to max. Wide). This may be remedied by using a little zoom. ●If light from the flash on a subject is insufficient, neither the proper exposure nor White Balance is achieved. ●The flash effect may not be sufficient in the following case: • Slow shutter speed ●No pictures may be taken if these marks (e.g. ) are flashing (flash is charging). ●Flash charging may take time if battery is low, or if using flash repeatedly.

- 56 -VQT4K59 Taking pictures with flash ■Available types in each mode (○: Available, –: Not available, : Default setting) [Scene Mode] ○*1○○○○–○○○ –○○○–––○– –○○○○–○○○ –○–––○––– ○○○○○○○○○ *1 Set to , , or depending on the subject and brightness. • The flash cannot be used when recording motion pictures, in [Scenery] mode or in , and Scene Modes. ■The available flash range when [Sensitivity] setting is [AUTO] Max. Wide Approx. 60 cm - 6.8 m (2.0 - 22 feet) Max. Tele Approx. 60 cm - 3.6 m (2.0 - 12 feet) ■Shutter speeds for each flash mode 1/60 *2 - 1/2000th 1/8*2 - 1/2000th * 2 Differs for each mode other than mode.

- 57 -VQT4K59 Taking close-up pictures Recording mode: When you want to enlarge the subject, setting to [AF Macro] () enables you to take pictures at an even closer distance than the normal focus range (up to 2 cm (0.066 feet) for max. Wide). Press to display [Macro Mode] Use cursor button to select [AF Macro] and press [MENU/SET] display

- 58 -VQT4K59 Taking close-up pictures Focus range When a subject is too close to the camera, the picture may not be properly focused. The shortest recording distance differs depending on the zoom ratio and the setting in macro recording mode. ■Shortest recording distance The shortest recording distance is the distance from the lens front to the subject. This distance changes gradually depending on the zoom position. (When zooming, even if [AF Macro] is set to ON, the shortest recording distance is the same as when it is set to OFF.) Zoom [Macro Mode] [] [OFF] Max. Wide 2 cm (0.066 feet) 30 cm (0.98 feet) Max. Tele 60 cm (2.0 feet) 2 m (6.6 feet) ●Focus range is displayed when operating the zoom, etc. 2.0ft 2.0ft --7.1X Focus range ●It may take some time until distant subjects come into focus. ●Using a tripod and [Selftimer] is recommended. Also, when recording a subject that is close to the camera, setting [Flash] to [Forced Flash Off] is recommended. (→53) ●Moving the camera after aligning the focus is likely to result in poorly focused pictures if subject is close to the camera, due to the margin for focus alignment being severely reduced. ●Resolution may be reduced around the edges of the picture.

- 59 -VQT4K59 Taking close-up pictures [Macro Zoom] To take even larger images of the subject, setting to [Macro Zoom] enables the subject to appear even larger than when using [AF Macro]. Press to display [Macro Mode] Use cursor button to select [Macro Zoom] and press [MENU/ SET] Adjust the Digital Zoom magnification with the zoom lever The zoom position is fixed at the max. Wide. Focus range is 2 cm (0.066 feet) - . ReturnEnlarge display Digital Zoom magnification (1x to 3x) ●In [Macro Zoom], higher magnification results in lower picture quality. ●When [Macro Zoom] is set, Extended optical zoom does not work. ●When [AF Tracking] or [Hi-Speed Burst] is set, macro zoom is canceled.

- 60 -VQT4K59 Taking pictures with self-timer Recording mode: We recommend using a tripod. This is also effective for correcting jitter when pressing the shutter button, by setting the self-timer to 2 seconds. Press to display [Selftimer] Use cursor button to select time duration and press [MENU/ SET] Take a picture Press the shutter button fully to start recording after the preset time. Self-timer indicator (Flashes for set duration) •T o cancel while in operation → Press [MENU/SET] ●Focus will be automatically adjusted immediately before recording if the shutter button is pressed fully. ●After Self-timer indicator stops flashing, it may then be lit for AF Assist Lamp.