Panasonic Digital Camera Dmc Ts3 Owners Manual For Advanced Features

							Playback/Editing
- 131 -
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
Select [Resize] on the [Playback] Mode menu. (P44)
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures or still pictures with date or text stamped cannot be resized.
[Resize]
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture and size.
[SINGLE] setting1Press  2/1  to select the picture, and then press 
[MENU/SET].
2Press  2/1  to select the size, and then press 
[MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed.
[MULTI] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to 
set.
•Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed. 
						

							- 132 -
Playback/Editing
You can enlarge and then crop the important part of the recorded picture.
Select [Cropping] on the [Playback] Mode menu. (P44)
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•Motion pictures or still pictures with date or text stamped cannot be cropped.•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [Cropping].
[Cropping]
Press  2/1 to select the picture, and then press [MENU/SET].
Use the zoom button and press  3/4/2/1 to select the parts to be 
cropped.
Zoom button [T]: Enlargement
Zoom button [W]: Reduction
3 /4 /2 /1: Move
0ø0õ 
						

							Playback/Editing
- 133 -
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favo rites. ([Favorite] in [Filtering Play])•Play back the pictures set as favorites only as a slide show.•Delete all the pictures not set as favorites. ([All Delete Except Ü])
Select [Favorite] on the [Playback] Mode menu.  (P44)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [Favorite] settings1Select [Favorite] on the [Playback] Mode menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•You can set up to 999 pictures as favorites.•You may not be able to set pictures taken with other equipment as favorites.
[Favorite]
Select the picture, and then press 
[MENU/SET].
•The setting is canceled when
 [MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							- 134 -
Playback/Editing
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to  print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card  (P138) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [Print Set] on the [Playback] Mode menu.  (P44)
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
•Exit the menu after it is set.
[Print Set]
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Playback/Editing
- 135 -
∫Canceling all the [Print Set] settings1Select [Print Set] on the [Playback] Mode menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISP.].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures with date or text stamped.
Note
•The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if 
this is the case.
•It may not be possible to use the print settings  with other equipment. In this case, cancel all the 
settings, and reset the settings.
•[Print Set] cannot be set for motion pictures.•If the file is not based on the DCF standard, the print setting cannot be set. 
						

							- 136 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [Protect] on the [Playback] Mode menu.  (P44)
∫Canceling all the [Protect] settings1Select [Protect] on the [Playback] Mode menu.
2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
[Protect]
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture, and then press 
[MENU/SET].
•The settings are canceled when [MENU/
SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Playback/Editing
- 137 -
You can delete or change the information relating to Face Recognition for the selected 
picture.
Select [Face Rec Edit] on the [Playback] Mode menu. (P44)
Note
•Cleared information regarding the [Face Recog.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorised using Face Recognition in [Category Selection] in [Filtering Play].
•You cannot edit the Face Recognition information of protected pictures.
[Face Rec Edit]
Press  3/4 to select [REPLACE] or [DELETE] and then press [MENU/
SET].
Press  2/1 to select the picture and then press [MENU/SET].
Press  2/1 to select the person and then press [MENU/SET].
(When [REPLACE] is selected) Press  3/4/2/ 1 to select the person 
to replace and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed. 
						

							- 138 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [Copy] on the [Playback] Mode menu. (P44)
Press  3/4 to select the copy destination and then press [MENU/
SET].
(When [ ] is selected) Press  2/1 to select the picture and then 
press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
Note
•If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new  folder is created and the picture is copied. 
If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•[Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after 
copying is finished.
•Motion picture recorded in [AVCHD] cannot be copied.
[Copy]
: All the picture data in the built-in memory are copied onto the card at one 
time.
: One picture at a time is copied from the card to the built-in memory. 
						

							Connecting to other equipment
- 139 -
[Playback] Mode: ¸
Connecting to other equipmentPlaying Back Pictures on a TV Screen
Preparations:
Set the [TV Aspect]. (P51)
Turn this unit and the TV off.
1 Yellow: to the video input socket
2 White: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
Connect the AV cable  B (supplied) to the video input and the audio 
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on and then press [ (].
•Normal playback is displayed automatically when the power is turned on by pressing 
and holding the [(] button.
Note
•Depending on the [Aspect Ratio], black bands may  be displayed on the top and bottom or the 
left and right of the pictures.
•Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.•Audio will be played back in monaural.•Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
Playing back pictures using the AV cable (supplied)
0â0÷0Á0ð0ö0õ0Á0Ð0Á0å0ê0è0ê0õ0â0í
 
						

							- 140 -
Connecting to other equipment
The recorded still pictures can be played back on a TV with an SD Memory Card slot.Note
•
Depending on the TV model, pictures may  not be displayed on the full screen.•Motion pictures recorded with [AVCHD] can be played back on Panasonic TVs (VIERA) with 
the AVCHD logo mark. In all other cases, connect the camera to the TV using the AV cable 
(supplied) and playback the motion picture.
•SDHC Memory Cards cannot be played back unles s it is a TV compatible with SDHC Memory 
Cards or SDXC Memory Cards.
•SDXC Memory Cards cannot be played back unle ss it is a TV compatible with SDXC Memory 
Cards.
You can enjoy high quality pictures and motion pictures on the TV by connecting the 
camera with the HDMI compatible high definition TV using HDMI micro cable (optional).
Playing back pictures on a TV with an SD Memory Card slot
Playing back on the TV with HDMI socket
Preparations: Turn this unit and the TV off.
1 HDMI socket
2 TV with HDMI socket
3 HDMI micro (D type)
A  Align the marks, and insert.
B  HDMI micro cable (optional)
•
Check the direction of the terminals and plug in/out straight holding onto the plug. (Malfunction 
may occur if it is plugged in obliquely or in the wrong direction, or the terminal may be 
damaged.)
Connect the HDMI micro cable  B (optional) to the HDMI input socket 
on the TV.
Connect the HDMI micro cable to the [HDMI] socket on the camera.
Turn the TV on and switch to HDMI input.
HDMI IN
0í0ð0ä0ì