Panasonic Digital Camera Dmc Zr3 Basic Operating Instructions

							11(ENG) VQT2L93
11 Camera ON/OFF switch
12 Zoom lever
13 Speaker
14 Microphone
15 Shutter button
16 Mode dial
17 Hand strap eyelet
•Be sure to attach the hand strap 
when using the camera to ensure 
that you will not drop it.
18 Lens barrel
19 [HDMI] socket
20 [AV OUT/DIGITAL] socket
21 Tripod receptacle
•When you use a tripod, make sure the 
tripod is stable when the camera is 
attached to it.
22 Card/Battery door
23 Release lever
24 DC coupler cover
•When using an AC adaptor, ensure that 
the Panasonic DC coupler (DMW-DCC5; 
optional) and AC adaptor (DMW-AC5PP; 
optional) are used.
•We recommend you use a battery with 
sufficient battery power or the AC adaptor 
when recording motion pictures.
•If while recording motion pictures using the 
AC adaptor and the power supply is cut off 
due to a power outage or if the AC adaptor 
is disconnected etc., the motion picture 
being recorded will not be recorded.
16131415
1112

18
20
19
17
2122
2324
DMC-ZX3&ZR3P-VQT2L93_eng.book  11 ページ  ２０１０年１月１２日　火曜日　午前１１時５７分 
						

							VQT2L93 (ENG)12
Charging the Battery
∫About batteries that you can use with this unitThe battery that can be used with this unit is DMW-BCG10PP.
•Use the dedicated charger and battery.•The camera has a function for distinguishing batteries which can be used 
safely. The dedicated battery (DMW-BCG10PP) supports this function. The 
only batteries suitable for use with this unit are genuine Panasonic 
products and batteries manufactured by other companies and certified by 
Panasonic. (Batteries which do not support this function cannot be used). 
Panasonic cannot in any way guarantee the quality, performance or safety 
of batteries which have been manufactured by other companies and are 
not genuine Panasonic products.
∫Charging
•The battery is not charged when the camera is shipped. Charge the battery 
before use.
•Charge the battery with the charger indoors.•Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). 
(The battery temperature should also be the same.) It has been found that counterfeit battery packs which look very similar 
to the genuine product are made available to purchase in some markets. 
Some of these battery packs are not adequately protected with internal 
protection to meet the requirements of appropriate safety standards. 
There is a possibility that these battery packs may lead to fire or 
explosion. Please be advised that we are not liable for any accident or 
failure occurring as a result of use of a counterfeit battery pack. To 
ensure that safe products are used we would recommend that a genuine 
Panasonic battery pack is used.
Attach the battery paying 
attention to the direction of the 
battery.
DMC-ZX3&ZR3P-VQT2L93_eng.book  12 ページ  ２０１０年１月６日　水曜日　午後２時２７分 
						

							13(ENG) VQT2L93
∫Charging time
∫ Approximate operating time and number of recordable pictures
Recording conditions by CIPA standard•CIPA is an abbreviation of [Camera & Imaging Products Association].•Normal Picture Mode•Temperature: 23 oC (73.4oF)/Humidity: 50% when LCD monitor is on.•Using a Panasonic SD Memory Card (32 MB).•Using the supplied battery.•Starting recording 30 seconds after the camera is turned on. (When the Optical 
Image Stabilizer function is set to [AUTO].)
•Recording once every 30 seconds  with full flash every second recording.•Rotating the zoom lever from Tele to Wide or vice versa in every recording.•Turning the camera off every 10 recordings and leaving it until the temperature 
of the battery decreases.
Connect the charger to the 
electrical outlet.
•Charging starts when the [CHARGE] 
indicator A lights green.
•Charging is properly complete when 
the [CHARGE] indicator  A turns off.
Detach the battery after charging is completed.
Charging time Approx. 130 min
Number of recordable pictures Approx. 330 pictures
Recording timeApprox. 165 min
Playback timeApprox. 300 min
90
DMC-ZX3&ZR3P-VQT2L93_eng.book  13 ページ  ２０１０年１月１２日　火曜日　午前１１時５７分 
						

							VQT2L93 (ENG)14
About the Built-in Memory/the Card
•Memory size: Approx. 40 MB•The built-in memory can be used as a temporary storage device when the card 
being used becomes full.
•The access time for the built-in memory may be longer than the access time for 
a card.
The following cards which conform to the SD video standard can be used with this 
unit.
(These cards are indicated as  card in the text.)
•Only cards bearing the SDHC logo (indicating that the card conforms to SD 
video standards) may be used as 4 GB to 32 GB cards.
•Only cards bearing the SDXC logo (indicating that the card conforms to SD 
video standards) may be used as 48 GB to 64 GB cards
•Use a card with SD Speed Class¢ with “Class 4” or higher when recording 
motion pictures in [AVCHD Lite]. Also, use a card with SD Speed Class with 
“Class 6” or higher when recording motion pictures in [MOTION JPEG].
¢ SD Speed Class is the speed standard regarding continuous writing.
•Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note
•Keep the Memory Card out of reach of children to prevent swallowing.
Built-in Memory
Card
Type of card which can be used with  this unitRemarks
SD Memory Card (8 MB to 2 GB)•SDHC Memory Cards and SDXC 
Memory Cards can be used only in 
equipment that is compatible with 
their respective formats.
•Check that the PC and other 
equipment are compatible when 
using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/
information/SDXC.html
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB to 64 GB)
DMC-ZX3&ZR3P-VQT2L93_eng.book  14 ページ  ２０１０年１月１２日　火曜日　午前１１時５７分 
						

							15(ENG) VQT2L93
Inserting and Removing the Card 
(optional)/the Battery
•Check that this unit is turned off.•We recommend using a Panasonic card.
Slide the release lever in the 
direction of the arrow and open 
the card/battery door.
•Always use genuine Panasonic 
batteries (DMW-BCG10PP).
•If you use other batteries, we cannot 
guarantee the quality of this product.
Battery: Insert until it is locked by 
the lever A being careful about 
the direction you insert it. Pull the 
lever  A in the direction of the 
arrow to remove the battery.
Card: Push it fully until it clicks 
being careful about the direction 
you insert it. To remove the card, 
push the card until it clicks, then 
pull the card out upright.
B: Do not touch the connection terminals of the card.•The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the  direction of the arrow.
DMC-ZX3&ZR3P-VQT2L93_eng.book  15 ページ  ２０１０年１月６日　水曜日　午後２時２７分 
						

							VQT2L93 (ENG)16
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Press [MENU/SET].
Press 2/1 to select the items (year, 
month, day, hour, minute, display 
sequence or time display format), 
and press  3/4 to set.
‚ : Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
•Press [‚] to return to the settings screen.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press  1.
•It can be changed in steps 3, 4 and 5 to set the clock.
Turn the camera on.
A [MENU/SET] button
B Cursor buttons
Changing the Clock Setting
DMC-ZX3&ZR3P-VQT2L93_eng.book  16 ページ  ２０１０年１月１２日　火曜日　午前１１時５７分 
						

							17(ENG) VQT2L93
Setting the Menu
This section describes how to select the Normal Picture Mode settings, and the 
same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the Normal Picture Mode
Press [MENU/SET] to display the menu.
Press 3/4 to select [AF MODE], and then 
press 1 .
•Depending on the item, its setting may not appear or it 
may be displayed in a different way.
Press 3/ 4 to select [ š] and then press 
[MENU/SET] to set.
Press [MENU/SET] to close the menu.
Switching to other menus
e.g.: Switching to the [SETUP] menu
1Press [MENU/SET] to display the menu.
2Press  2.
3Press 4 to select the [SETUP] menu icon 
[].
4Press  1.
•Select a menu item next and set it.
DMC-ZX3&ZR3P-VQT2L93_eng.book  17 ページ  ２０１０年１月１４日　木曜日　午後３時３３分 
						

							VQT2L93 (ENG)18
Mode switching
Selecting the [REC] Mode
∫List of [REC] Modes
Turn the camera on.
A [REC]/[PLAYBACK] selector switch
B Mode dial
Slide the [REC]/[PLAYBACK] selector 
switch to [ !].
Switching the mode by rotating the 
mode dial.
¦Intelligent Auto Mode
The subjects are recorded using settings automatically selected by the 
camera.
!Normal Picture Mode
The subjects are recorded using your own settings.
My Scene Mode
Pictures are taken using previously registered recording scenes.
ÛScene Mode
This allows you to take pictures that match the scene being recorded.
 ìClipboard Mode
Record as a memo.
ON
OFF
DMC-ZX3&ZR3P-VQT2L93_eng.book  18 ページ  ２０１０年１月６日　水曜日　午後２時２７分 
						

							19(ENG) VQT2L93
[REC] Mode: ñ
Taking Pictures Using the Automatic 
Function 
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the 
recording conditions so we recommend this mode for beginners or those who 
want to leave the settings to the camera and take pictures easily.
Slide the [REC]/[PLAYBACK] 
selector switch to [!].
A [REC]/[PLAYBACK] selector switch
B Mode dial
C Shutter button
Set the mode dial to  [ ñ].
Hold this unit gently with both hands, keep your arms still 
at your side and stand with your feet slightly apart.
Press the shutter button halfway to 
focus.
•The focus indication  1 (green) lights when 
the subject is focused.
•The AF area  2 is displayed around the 
subject’s face by the Face Detection function. 
In other cases, it is displayed at the point on 
the subject which is in focus.
•The focus range is 3 cm (0.10 feet) (Wide)/
1 m (3.28 feet) (Tele) to  ¶.
Press the shutter button fully (push it in further), and take 
the picture.

NN
1
2
DMC-ZX3&ZR3P-VQT2L93_eng.book  19 ページ  ２０１０年１月１２日　火曜日　午前１１時５７分 
						

							VQT2L93 (ENG)20
When the camera identifies the optimum scene, the icon of the scene concerned 
is displayed in blue for 2 seconds, after which its color changes to the usual red.
•[¦] is set if none of the scenes are applicable, and the standard settings are 
set.
•When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s 
face, and it will adjust the focus and exposure.  (Face Detection)
It is possible to set the focus to the s pecified subject. Focus will keep following the 
subject automatically even if it moves.
1Press  3.
•[ ] is displayed in the upper left of the screen.•AF Tracking frame is displayed in the center of 
the screen.
•Press  3 again to cancel.
2Bring the subject to the AF tracking frame, 
and press  4 to lock the subject.
•
AF tracking frame will turn yellow.•An optimum scene for the specified subject will 
be chosen.
•Press  3 to cancel.
Scene Detection
¦> [i-PORTRAIT]
[i-SCENERY]
[i-MACRO]
[i-NIGHT PORTRAIT]
•Only when [ ] is selected
[i-NIGHT SCENERY]
[i-SUNSET]
[i-BABY]
AF Tracking Function
DMC-ZX3&ZR3P-VQT2L93_eng.book  20 ページ  ２０１０年１月１２日　火曜日　午前１１時５７分