Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

							51
 Chapter 2    More Menus Features
5Select the Layout format, and then 
select “OK”.
‰When 2 in 1 is selected
‰When 4 in 1 is selected
‰When 6 in 1 is selected
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42). 
						

							52
 Chapter 2    More Menus Features
Copying Originals with Saddle-Stitch Binding (Booklet)
zOriginals should be placed on the ADF. (5.5 x 8.5 or 8.5 x 11 size is only available, up to 60 originals)
zSaddle-stitch binding is possible only when the optional 1Bin Saddle-Stitch Finisher (DA-FS405W) is installed.
Ledger (11 x 17), Legal (8.5 x 14), and Letter-R (8.5 x 11) are the only applicable paper sizes (legal size 
can be selected only when printing from computer).
zThe standard setting for the copy size is the reduced size, however, the setting can be changed to the original 
size. Refer to Copier Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
z
When the fold position does not match with the center position of the copies, set the binding margin. Refer to General 
Settings
 (Key Operator Mode) in the Operating Instructions (For Function Parameters) of provided CD-ROM.
zStamping can be combined with the Booklet function. For copying with stamp, refer to Copying with Stamping 
(see pages 74 to 82).
1Select “2-Sided / Original->Copy”, 
and then select “Booklet”.
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
zWhen “Multi-Size Feed” is selected, 
“Booklet” cannot be selected.
2Select “1 Sided” or “2 Sided” for the 
original. 
						

							53
 Chapter 2    More Menus Features
‰When “2 Sided” is selected
Select the bind position of the original, and 
then select “OK”.
3Select the bind position for the copy.
4Select the cover page type if 
necessary.
Select “Cover”.
Select the cover type.
zWhen “Blank” is selected for the cover type, 
up to 56 originals can be placed on the ADF.
Select “Cover” to select a paper.
zWhen changing paper for copies other than 
the cover, select “Copy”. If the paper of 
desired size is available on the tray, the 
display changes.
Select a paper size from the display.
Long Edge:
Copies both sides of 
original aligning to the long 
edge of the original.
Short Edge:
Copies both sides of 
original aligning to the short 
edge of the original.
Select when binding the left 
side or the top side of the 
page.
Select when binding the 
right side or the bottom side 
of the page.
BlankNot copied on the cover.
CopyCopied on the cover.
Continued on the next page... 
						

							54
 Chapter 2    More Menus Features
5Select “OK” to exit the cover settings.
6Select “OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
zWhen the fold position does not match with 
the center position of the copies, set the 
binding margin. Refer to General Settings 
in the Operating Instructions (For Function 
Parameters) of provided CD-ROM.
zThe stapled copies are delivered to the 
Saddle Tray of the 1Bin Saddle-Stitch 
Finisher as shown below.
Staple Position
Saddle Tray 
						

							55
 Chapter 2    More Menus Features
Copying Mixed Size Originals from the ADF
Use this function when copying mixed size originals (8.5 x 11 and 11 x 17, or 5.5 x 8.5, 8.5 x 
11-R, and 8.5 x 14 (Legal)). Using the ADF, original size can be detected automatically and copied in 
the same size or the specified size.
zWhen copying in the 2-Sided mode
zIf no copy size is specified, the original is copied in the original size. If the copy size is specified, the original is 
copied automatically enlarged or reduced in accordance with the specified size.
zOnly when specifying the same copy size (8.5 x 11 only), the copies can be rotated and printed as a booklet 
or a unit of specified number of pages by setting “Rotate-Sort” or “Rotate-Group”.
1Select “2-Sided / Original->Copy”, 
and then select “Multi-Size Feed”.
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
2Select the Orientation of the original.
Combination Original Size 1Original Size 2
Combination 1 8.5 x 11-R (Letter-R) 8.5 x 14 (Legal)
Combination 2 11 x 17 (Ledger)  8.5 x 11 (Letter)
Ex: Original Size (Standard Setting)Ex: Specified Size
8.5 x 11-R and Legal
8.5 x 11 and 11 x 178.5 x 11-R and Legal
8.5 x 11 and 11 x 178.5 x 11-R
8.5 x 11
Continued on the next page... 
						

							56
 Chapter 2    More Menus Features
3Select the desired copy mode, and 
then select “OK”.
‰When 1 -> 2, 2 -> 1 or 2 -> 2 is selected
Select the Orientation of the original.
Select the bind position of the original, and 
then select “OK”.
Ex: When 1 ->2 is selectedWhen all originals are 
vertically long 
Ex:
When the smaller original is 
vertically long, and the 
larger original is horizontally 
long
Ex:
When the smaller original is 
horizontally long, and the 
larger original is vertically 
long
Ex:
When all originals are 
horizontally long
Ex:
1 -> 1:
1-Sided Original to 1-Sided Copy
1 -> 2:
1-Sided Original to 2-Sided Copy
2 -> 1:
2-Sided Original to 1-Sided Copy
2 -> 2:
2-Sided Original to 2-Sided Copy
ABCABC
ABCABC
ABCABC
ABCABC
The smaller original is aligned to 
the long edge.
The smaller original is aligned to 
the short edge.
The larger original is aligned to the 
long edge.
The larger original is aligned to the 
short edge.
Long Edge:
Copies both sides of the 
smaller original aligning to 
the long edge of the 
original.
Short Edge:
Copies both sides of the 
smaller original aligning to 
the short edge of the 
original.
Long Edge:
Copies both sides of the 
larger original aligning to 
the long edge of the 
original. 
						

							57
 Chapter 2    More Menus Features
When 2 ->2 is selected , select “Change” and 
select the bind position for the copy, and then 
select “OK”.
4When copying the same paper size, 
select “Basic Menu”, and then select 
a desired copy size with the Copy Size 
buttons.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
Short Edge:
Copies both sides of the 
larger original aligning to 
the short edge of the 
original.Ex:Combination of Letter (Portrait layout) and 
Ledger (Landscape layout) size original 
Copy images (1 -> 2 copy mode)
Bind position is Short Edge.
Ledger
(Landscape) Letter
(Portrait)
Copy size is 
not set.Copy size is 
set to Letter.
Letter
(Portrait)Blank
Ledger
(Landscape)
Letter*1
(Landscape)
Letter
(Portrait) Face Face
BackBack
*1 Ledger size will be 
reduced to Letter size.
Ex:Combination of Letter (Portrait layout) and 
Legal (Portrait layout) size original 
Copy images (1 -> 2 copy mode)
Bind position is Short Edge.
Legal
(Portrait)Letter
(Portrait)
Copy size is 
not set.Copy size is 
set to Letter.
Face Face
Letter
(Portrait)Letter
(Portrait)
Blank Legal
(Portrait)
*2 Legal size will be 
reduced to Letter size.
Back Back
Letter*2
(Portrait) 
						

							58
 Chapter 2    More Menus Features
Copying Special Originals (Thin Paper, etc.) from the ADF
„SADF
This mode adds a 5-second delay to allow another original to be placed on the ADF. Special originals 
(thin paper, etc.) can be fed from the ADF and copied continuously using the SADF mode. 
1Place one original (minimum 50 g/m2
/ 14 lb) on the ADF. 
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “2-Sided / Original->Copy”, 
and then select “Job Build and 
SADF”.
5Enter the desired number of copies.
6Press the Start key.
7Place the next original within 5 
seconds of last ejected original(s). 
8After the last page is scanned, select 
“No” in the Confirmation screen. 
						

							59
 Chapter 2    More Menus Features
„Job Build
This is useful for copying multiple sets of originals that exceed the maximum capacity of the ADF of 
100 sheets (20 lb/Letter). (See the example below.)
Ex: To make 5 sets of sorted copies of 115-sheet of originals.
(a) Place the first 100 sheets of originals on the ADF.
(b) Select “2-Sided / Original->Copy”, and then select “Job Build and SADF”.
(c) Select “Sort / Finish”, and then select the desired Sorting/Finishing end result.
(d) Enter 5 for the number of copies.
(e) Press the Start key.
( f ) After scanning the first 100 sheets, you can place the remaining 15 sheets of originals on the ADF 
within 5 seconds to continue copying without interrupting the cycle.
If you do nothing, the machine will display the message “Another original?”.
(g) Place the remaining 15 sheets of originals on the ADF, and then select “Yes”.
(h) After scanning the remaining 15 sheets, the message “Another original?” will be displayed. Select 
“No” to start the printing process.
zOriginals should be placed on the ADF.
zUp to 999 sheets of originals can be scanned in one job.
The maximum capacity of the scanned data can be reached less than 999 sheets of originals depending on the 
type of sheets being scanned. 
If the memory becomes full during scanning, follow the instructions on the display.
100 1
115
1
115 101
Originals: 100 sheets 
Originals: Remaining 15 sheets The 1st and 2nd scanned data 
are combined into one job.
5 sets of 115-sheet sorted 
copies are printed. 
						

							60
 Chapter 2    More Menus Features
Sor t Mode
The original can be copied, printed, and sorted in a specified number of sets.
The following Finishing modes are available when the optional Finisher and Punch Unit are installed.
zOnly 8.5 x 11 (Letter/Letter-R) size is applicable for “Rotate-Sort” and “Rotate-Group”. When “Rotate-Sort” 
or “Rotate-Group” is selected with Letter and Letter-R size paper loaded in the paper tray, sets of copies are 
stacked in alternate direction (rotation of 90 degrees).
zFor using saddle-stitch binding, refer to Copying Originals with Saddle-Stitch Binding (Booklet) (see page 
52).
zThe number of pages that can be stapled is as follows.
For 1Bin Finisher
8.5 x 11 (Letter): 30 sheets, 8.5 x 14 (Legal) / 11 x 17 (Ledger): 20 sheets
For 1Bin Saddle-Stitch Finisher
8.5 x 11 (Letter): 
2-50 sheets, 8.5 x 14 (Legal) / 11 x 17 (Ledger): 2-25 sheets
Saddle-Stitch:
8.5 x 11 (Letter-R), 8.5 x 14 (Legal), 11 x 17 (Ledger): 10 sets (6-10 sheets/11-15 sheets*) / 20 sets (2-5 sheets)
*17 lb Bond Paper
1
1
1
1
4
2
3
1
Sort Rotate-Sort Rotate-Group
Shift-Sort Shift-Group PunchShift-Sort Saddle-Stitch
Shift-Sort Staple-Sort