Panasonic Digital Copier Dp 2000 Operating Instructions
Have a look at the manual Panasonic Digital Copier Dp 2000 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Accessories Options Finisher/Exit Guide Unit PHOTO TEXT/ PHOTO TEXT DARKER LIGHTERPAPER TRAY OUTPUT TRAY ON LINE DATA ON LINEABBRDIRECTORY SEARCH SET ALARM TONE ACTIVE ORIGINAL COPY SIZE SIZE FAX COPYINTERNET PRINTER ZOOM / VOL. START 1234567890 PQRSGHI TUVJKL ABC WXYZMNODEF STOP MULTI-SIZE FEED1 SIDED COPY 2 SIDED COPYSORTSTAPLESHIFT LEDGER LEGAL INVOICELETTER LETTERCLEAR DP-2000REDIAL /PAUSEFLASH /SUB-ADDR MONITOR COPIED BLANKMEMORY INBOOK EDGE MARGIN 2 PAGECOPY2 in 1OHPOHP RESETENERGY SAVERINTERRUPTFUNCTION 1. Features DA-FS200 (Finisher) Shift-Group Shift-Sor t Staple-Sort CShift electronic sort copyCStaple electronic sort copy DA-FK200/FK210 (Dual-Path Exit Guide Unit/Paper Transport Unit) CFeeds paper to finisher 2. Operation ADF/i-ADF Platen Face-Up 3 Number of Copies 4 Press START Staple Position 1 Place the Original 2 Press Sort/Finish key (circulation) to select Finisher Mode Select the type of finishing mode Sort (or Sort-Rotate) Multiple copies are sorted automatically. Staple-Sort Multiple copies are sorted automatically and stapled on the top left corner (1 position). Shift-Sort Multiple copies are sorted automatically and stacked with off-set shifting. Shift-Group Multiple copies are grouped by off-set shifting. Non-Sort Copy is stacked on the tray. CSort or Sort-Rotate can be changed by General Functions setting. (see page 29) CDuring staple sor ting, if more than the allowable maximum number of sheets (30 sheets: Letter, Letter ; 20 sheets: Legal; 15 sheets: Ledger) are inserted, or if the staples run out during copying, the copying mode will change to shift sorting. CShift-Sort and Staple-Sort are not available on the Invoice size paper. CThe capacity of the finisher tray is approximately 1000 sheets (Letter, Letter , Invoice ), 700 sheets (Legal) or 500 sheets (Ledger). SORTSTAPLESHIFT SORTSTAPLESHIFT SORTSTAPLESHIFT SORTSTAPLESHIFT SORTSTAPLESHIFT
42 Accessories 1 Hold the latch and pull out the finisher. 2 Remove the staple cartridge. 3. Replacing the staple car tridge The message shown on the left appears when the staples run out. 3 #Remove the empty staple case. $Install the new staple case. 4 Pull out the tape. Finisher/Exit Guide Unit ADD STAPLES U11
43 Options Accessories 5 Reinstall the staple cartridge. 6 Return the finisher to the original position. (Check that the latch is securely fastened.)
44 Accessories 1 Remove the staple cartridge. 2 #Open the staple cover. $Remove the residual staple. %Close the staple cover. 4. If the unit fails to staple after replacing the staple cartridge, follow the instructions below. 3 Reinstall the staple car tridge. Finisher/Exit Guide Unit
45 550-Sheet Paper Tray Problem Solving 1 Pull the paper tray out of the copier. 2 Place the paper with the copying surface facing upward. Special papers, like glossy paper, mailing labels and transparencies cannot be used in the paper tray. Use the sheet bypass for special paper. 3 Make sure paper is not loaded above the overfill indicator located in the paper tray. Adding Paper ( J JJ J J) ATTENTIONCDo not use paper with folds or wrinkles. Refer to page 34 for details on changing the paper size for the paper tray. CUnused paper should always be placed into a bag and the opening should be sealed for storage. If the paper is left exposed, problems such as paper curl, paper jams, wrinkles or loss of copied image quality may occur. 4 Firmly push the paper tray back into the copier. Options J
46 Replacing the Toner Cartridge and Waste Toner Box ( ? ?? ? ?) 1 Open the front cover. 2 Slowly pull the waste toner box straight out. 3 Close the box with the enclosed cap. 4 Pull on the Green release latch to remove the Toner Car tridge out of the machine while holding it by the Green handle. Cap Problem Solving ATTENTIONCFor optimum copy quality use the recommended Panasonic toner. Store toner in a cool dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
47 ? 5 Shake the new toner car tridge well. 6 Install the new toner car tridge into the machine, and pull out the protective seal. Note: Pull on the seal slowly and straight out. 7 Install a new waste toner box. 8 Close the front cover. Problem Solving CDo not reuse the toner from the waste toner box.ATTENTION
48 NOTECMake sure that the misfeed indicator goes off after removing the misfeed paper. The misfeed indicator will not go off if the paper is still jammed in the copier. Check again and remove all misfeed paper. PHOTO TEXT/ PHOTO TEXT DARKER LIGHTERPAPER TRAY OUTPUT TRAY ON LINE DATA ON LINEABBRDIRECTORY SEARCH SET ALARM TONE ACTIVE ORIGINAL COPY SIZE SIZE FAX COPY INTERNET PRINTER ZOOM / VOL. START 123 456 789 0 PQRSGHI TUVJKL ABC WXYZMNODEF STOP MULTI-SIZE FEED1 SIDED COPY 2 SIDED COPYSORTSTAPLESHIFT LEDGER LEGAL INVOICELETTER LETTERCLEAR DP-2000REDIAL /PAUSEFLASH /SUB-ADDR MONITOR COPIED BLANKMEMORY INBOOK EDGE MARGIN 2 PAGECOPY2 in 1OHPOHP RESETENERGY SAVERINTERRUPTFUNCTION Paper Misfeed Locations A: Finisher (see page 49) B: Paper transport area (see page 50) C: Paper entry area (see page 51) D: Paper feed unit (see page 53) E: ADF/i-ADF (see page 54) IMisfeed Indicator Removing a Misfeed Paper Problem Solving Paper Misfeed Indicators and Locations When a paper misfeed occurs, the misfeed indicator and the misfeed location(s) will be displayed on the panel display.
49 c Problem Solving 1 2 3 Pull out the finisher. Lift up the lever and clear the paper jam. Return the finisher to the original position. Finisher CMake sure that the misfeed indicator goes off after removing all misfed paper. CMake sure that the misfeed indicator goes off after removing all misfed paper.ATTENTION
50 Removing a Misfed Paper CMake sure that the misfeed indicator goes off after removing all misfed paper. 1 2 3 Push the latch to open the cover. Remove the misfed paper. Close the cover by pushing the latch. (Check that the latch is securely fastened.) Paper Transport Area CMake sure that the misfeed indicator goes off after removing all misfed paper. ATTENTION Problem Solving