Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

							71
Multi Sequence Setup (MULTI
SEQUENCE SETUP)
8Camera Channel (CAMERA CH)
1 - 8:The selected camera image will be displayed in
single spot mode.
QUAD 4A: Camera images 1 through 4 will be dis-
played in quad-split mode.
QUAD 4B:Camera images 5 through 8 will be dis-
played in quad-split mode.
8Time (TIME)
Available times:2-30 S
Click the [SET] button when all items have been set proper-
ly.
Spot Sequence Setup (SPOT
SEQUENCE SETUP)
8Camera Channel (CAMERA CH)
1 - 8:The selected camera image will be displayed.
OFF: The blackout screen will be displayed.
8Time (TIME)
Available times:2-30 S
Camera View Setup (CAMERA
VIEW SETUP)
8Mode (MODE)
ON:The live image of the channel is displayed.
OFF:The blackout image is displayed.
Click the [SET] button when all items have been set proper-
ly. 
						

							72
System Information (SYSTEM
INFORMATION)
8HDD Hour Meter (HDD HOUR METER) 
Each meter shows how many hours the digital hard disk
recorder has been operated in playback, recording and
idle. The built-in HDD needs replacement when the
hour meter reads around 30 000 H. 
8HDD Capacity (HDD CAPACITY)
The total usable capacity of the built-in hard disk is indi-
cated.
8Resolution (RESOLUTION)
The selected resolution is displayed.
NORMAL:Normal resolution
SIF:Source Image Format (lower than NORMAL)
8System Software Version (SYSTEM VERSION) 
This line displays the version number of the installed
system software.
8MAC Address (MAC ADDRESS)
A MAC (Media Access Control) address is displayed. 
8IP Address (IP ADDRESS)
The IP address is displayed.
8Subnet Mask (SUBNET MASK)
The subnet mask is displayed.
8Gateway (GATEWAY)
The gateway is displayed.
8Domain Name (DOMAIN NAME)
The domain name is displayed when it is set to ON in
the network setup. 
8DNS Server Address (DNS SERVER ADDRESS)
The DNS server address is displayed when it is set to
ON in the network setup. 
Click the [SYSTEM LOG] button to review errors derived
from hardware.
Click the [ERROR INFORMATION] to review errors derived
from network connections. 
						

							73
System Log (SYSTEM LOG)
Error causes are abbreviated as shown at the top of the
window.
Error Information on Network
Connections 
(ERROR INFORMATION (FTP,
SMTP, DDNS))
Up to 100 errors are displayed. The list is updated by dis-
carding old records when new events arise. 
Refer to Appendix Network Error Information for details. 
						

							74
User Setup (USER SETUP)
A maximum of 16 users can be registered.
8User Authorization (USER AUTHORIZATION)
OFF:Allows free access.
ON: Verifies the password and access level for a maxi-
mum of sixteen users.
Click the [SET] button.
8User Name (USER NAME)
Enter from the keyboard. The default is admin.
8Password (PASSWORD)
Enter from the keyboard. The default is admin.
8Access Level (ACCESS LEVEL)
The default is [1].
[1] ADMINISTRATOR:Allows access to the setup
parameters, live and playback images.
[2] LIVE MONITORING & PLAYBACK:Bans access to
the setup parameters.
[3] LIVE MONITORING ONLY:Allows only monitoring
of live images.
Click the [SET] button when all items have been set proper-
ly.
8Deleting Users (DELETE USER)
Enter or select the user name you wish to erase, and
click the [DELETE] button.
Host Setup (HOST SETUP)
A maximum of 8 hosts can be registered.
8Host Authorization (HOST AUTHORIZATION)
OFF: Allows free access.
ON: Verifies the host address and access level for a
maximum of eight hosts.
Click the [SET] button.
8Set Host Allowed to Access (SET HOST
ALLOWED TO ACCESS )
HOST ADDRESS: enter from the keyboard. 
Click the [SET] button.
8Deleting Hosts (DELETE HOST)
Enter or select the host address you wish to erase, and
click the [DELETE] button.
Note:Do not enter text lines effective as the HTML tag from
the keyboard to the input columns. Otherwise, the menu
setup using HTML files may malfunction. If this hap-
pens, you need to initialize the settings by referring to 
Initializing described in page 24.
NETWORK CONFIGURATION 
						

							75
Interval (INTERVAL)
Available times: 1 - 1 440 seconds, 1 - 1 440 min-
utes
Channel to Send (CHANNEL TO SEND)
OFF:Does not send the channel image.
ON:Sends the channel image.
Click the [SET] button when all items have been set proper-
ly.FTP Client Setup (FTP CLIENT
SETUP)
8Basic Setup (BASIC SETUP)
Server Address (SERVER ADDRESS)
Enter the server address.
Login User Name (LOGIN USER NAME)
Enter the user name.
Login Password (LOGIN PASSWORD)
Enter the password.
Mode (MODE)
Available modes:SEQUENTIAL, PASSIVE
Click the [SET] button.
8FTP Send by Periodic Timer (FTP SEND BY
PERIODIC TIMER)
FTP Sending (FTP SENDING)
ON: Sends the channel images at the specified
interval.
OFF:Does not send.
Server Directory (SERVER DIRECTORY)
Enter the directory where you store the image data.
File Name (FILE NAME)
File Name Rule: Date & time basis, Serial number-
ing  
						

							76
Mail Setup (MAIL SETUP)
8Alarm Mail Setup (ALARM MAIL SETUP)
Sending Mail (SEND MAIL)
OFF: Does not send.
ON: Sends an e-mail to a maximum of four recipi-
ents when an alarm operates.
Attaching Alarm Image (ATTACH ALARM IMAGE)
OFF:Does not attach.
ON:Attaches the image of the alarmed channel to
the mail.
SMTP Server Address (SMTP SERVER ADDRESS)
Enter the SMTP server name or its IP address where
you wish to send a mail. The SMTP server name can be
used only when DNS is set to “AUTO” or “MANUAL”. 
Sender Address (FROM ADDRESS)
Enter from the keyboard.
POP3 Authentication (POP3 AUTHENTICATION)
ON:Enables authentication with POP3 before
SMTP.
OFF:Does not use authentication.
POP3 Server Address (POP3 SERVER ADDRESS)
Enter the SMTP server name or its IP address where
you wish to send a mail if POP3 authentication is set to
ON. The server name can be used only when DNS is
set to “AUTO” or “MANUAL”. User Name (USER NAME)
Enter the user name of the sender’s account.
Password (PASSWORD)
Enter the password of the sender’s account.
Click the [SET] button.
8Set Mail Address (SET MAIL ADDRESS)
Enter from the keyboard, and click the [SET] button. 
A maximum of four addresses can be set.
8Delete Mail Address (DELETE MAIL ADDRESS)
Enter or select the address you wish to erase,
and click the [DELETE] button.
Note:Use the VIEW.HTML to open the attached image
and view it in the normal aspect. Otherwise, it will
be vertically reduced to half size. 
						

							77
Network Video Setup
(NETWORK VIDEO SETUP)
8Live & Playback Image Setup (LIVE & PLAY
IMAGE SETUP)
Video Rate (VIDEO RATE)
Applicable rates: FAST, MIDDLE, SLOW, VERY
SLOW 
Click the [SET] button.
8Live Sequence Setup (LIVE SEQUENCE SETUP)
Use Sequence (USE SEQUENCE)
OFF: Does not run the sequence.
ON: Runs the sequence.
Auto Skip (AUTO SKIP)
OFF: Displays any step where no video is input as
a blackout screen.
ON: Skips any step where no video is input.
Camera Channel (CAM CH)
Available channels: CH1 - CH8, OFF
Duration (TIME)
Available durations: FAST, MIDDLE, SLOW, VERY
SLOW
Click the [SET] button. 
						

							78
qMain Control Panel Tab
Opens the main control panel.
wAlarm List Tab
Opens the alarm list. 
eNetwork Status Display
LIVE, LIVE SEQ, PLAY, REV PLAY, >> (FF), 
						

							79
@4Add Favorite Button (ADD FAVORITE)
Registers the IP address (or URL when using DDNS) to
the favorite of the browser.
@5Recording Button (REC)
Starts recording.
@6Recording Stop Button (REC STOP)
Stops recording. oStart Button (START)
While playing back, clicking this button will specify the
start point for downloading.
!0Start Time Display Area
Displays the start time of the recorded image that you
are to download.
!1End Button (END)
While playing back, clicking this button will specify the
end point for downloading.
!2End Time Display Area
Displays the end time of the recorded image that you
are to download.
!3Download Button (DOWNLOAD)
Pulls out the time range specified for the image data
from the start to end time. 
!4To the Oldest Frame Button (TO OLDEST)
Jumps the recorded image to the oldest frame of the
record.
!5Rewind Button (REW)
Rewinds the recorded image on the WJ-HD220 to the
start position.
!6Reverse Play Button (REV PLAY)
Changes the playback direction backwards.
!7Play Button (PLAY)
Plays back the recorded image.
!8Fast Forward Button (FF)
Fast-forwards the recorded image on the WJ-HD220 to
the end position.
!9To the Latest Frame Button (TO LATEST)
Jumps the recorded image to the latest frame of the
record.
@0Previous Frame Button (PREV FRAME)
Returns the frame one step to the previous.
@1Pause Button (PAUSE)
Pauses the playback image.
@2Stop Button (STOP)
Stops playbacks including REW, PREV FRAME, PAUSE,
PLAY, NEXT FRAME, and FF.
@3Next Frame Button (NEXT FRAME)
Forwards the frame one step to the next while pausing.
@6@5
@4 
						

							80
Main Control Panel8Camera Selection Button (Camera Select) 
Click any of the buttons. 
The selected camera channel will be displayed in the
image area.
8Multiscreen Selection Button (Multiscreen Select)
Clicking the button displays the respective multiscreen.
8Live Sequence Button (LIVE SEQUENCE)
Clicking the [LIVE SEQUENCE] button runs a series of
live images in the preset sequence and for the preset
display time.
8Alarm Reset Button (ALARM RESET)
The activated alarm event is reset.
8Time & Date Search Button (TIME&DATE
SEARCH)
Clicking the button will display the time and date search
dialog.
1. Specify the date and time. 
2. Click the [OK] button.
The image will be searched, and displayed in the
image area.
Note:Searching may take 18 seconds at worst particu-
larly when the recorder runs simultaneous recording
and playback, and/or when the targeted image is of
small size.
12
8
3