Panasonic Digital Disk Recorder Wj Rt416 Operating Instructions

21
Manual recording
Start/stop recording manually.
z
Press the [REC] button.
• Recording of images from all the camera channels except channels which supply no video input signal will start. The
[REC] button and the camera channel selection buttons respective to the channels used for the current recording will
light.
• When recording starts, the  icon (recording icon) will be displayed in the area on which images from the camera
channels used for the current recording are displayed.
• To configure the...

22
Playback
Recorded images can be played as follows. Recorded images will be played on a single screen.
z
Select the desired camera channel by pressing the camera channel selection buttons (1 - 16) or by moving the
cursor onto the area respective to the desired camera channel using the arrows button (CDAB) when display-
ing images on a multi-screen.
x
Click the [PLAY] button.
• Recorded images will be displayed on a single screen. When playback starts, the  icon (playback icon) will be dis-
played and...

23
Skip playback
When the [SKIP s] button is pressed during playback, playback will be skipped to the recorded image of the previous
recorded images. When the [SKIP d] button is pressed during playback, playback will be skipped to the recorded image of
the next recorded images. 
Pausing
Playback will be paused when the [PLAY] button is pressed during playback. Playback will be resumed when the [PLAY] but-
ton is pressed again.
Frame by frame forward playback
When the [FWD] button is pressed during...

24
Search and play
It is possible to search the desired recorded images and play them. The search and play can be carried out when displaying
images on a single screen.
The following is available as the search filter for the search and play.
• Time and date when images had been recorded
• Recording type (Manual recording/Timer recording/Alarm recording)
• Type of the alarm recording (Terminal alarm recording/VMD alarm recording/Command alarm recording)
Start playback by designating the desired time and...

25
Search and play with multiple search filters
The following search filters are available for search and play.
• Camera CH: Only recorded images of the selected camera channels will be searched.
• Start/End: Images recorded in the period designated by entering the start time and end time will be searched.
• Filtering: Images recorded by the designated recording type (Manual recording/Timer recording/Alarm recording) and
the alarm recording type (Terminal alarm recording/VMD alarm recording/command alarm...

26
Screenshot 2
The search result window will be displayed.Step 3
Move the cursor to the desired recorded images to play.
Prev:The previous page will be displayed.
Next:The next page will be displayed.
Return:The search window will be displayed again.
Step 4
Press the [SET] button after selecting the desired recorded
images.
→Playback of the selected recorded images will start.
Refer to page 22 for further information about playback
operations.
Note:
The latest 5 000 recorded images will be displayed in...

27
The recorder will take the alarm action according to the settings when the following events occur.
• Terminal alarm: When a signal is supplied from an external device such as a door sensor to the ALARM IN/CONTROL ter-
minal, this is stated as an event of a terminal alarm.
• VMD (Video motion detection) alarm: When motion is detected by the VMD function, this is stated as an event of a VMD
alarm.
• Command alarm reception: When a command alarm is supplied from the DATA port and the RS485 port, this is...

28
• Records alarm logs
Time and date or description of the event will be recorded as an alarm log at an event occurrence. Refer to page 68 for fur-
ther information about the alarm log.
• Starts recording automatically (Alarm recording)
Recording images from the camera to which an event occurred will start automatically at an event occurrence. Refer to
pages 59 and 60 for how to configure the settings for recording at an event occurrence (terminal/command alarm record-
ing/VMD alarm recording)....

29
Copying (Duplicate)
It is possible to copy recorded images onto an external recording device (HDD, DVD-R, CD-R, USB memory, etc.) connected
to the recorder. It is recommended to make back-up copies on a regular basis for unexpected situations such as malfunction
of the HDD.
Important:
• Do not disconnect the cable connecting between the external recording device and the recorder in the process of copy-
ing. Otherwise, it may damage both the recorder and the external recording device.
• When copying...

30
Screenshot 2
The Copy List window will be displayed.
Notes:
• The latest 5 000 recorded images will be displayed in
the list form.
• When copying is started, all recorded images displayed
in the Copy List window will be copied. It is impossible
to copy a specified recorded image.
• Configure the filtering settings and set the start/end
time and date in order to make the size of data to be
copied smaller than the available capacity of the exter-
nal recording device (copying destination).
Important:...