Panasonic Digital Hd Video Cassette Recorder Ajhd130dc Operating Instructions

21
Setup (Initial Settings)
SET–UP MENU 
2NO
FACTORY
USER (ALL)
USER (NOT SYSTEM)
Press  the  MENU-UP  button  or  MENU-DOWN
button  to  move  the  cursor  to  FACTORY,  and
press the SET button.
OIf  the  cursor  is  moved  to  FACTORY  and  this
operation is performed, the factory settings are
restored for all the menus with the exception of
the SYSTEM menu.
OIf the cursor is moved to NO and this operation
is  performed,  operation  returns  to  the  menu
screen without restoring the factory...

22
How to load the user defaults
Set  the  LOCAL/MENU/REMOTE  switch  to  the
MENU position.
The  VTR  is  set  to  the  menu  setting  mode,  and
the  menu  screen  is  displayed  on  the  video
monitor.1
Press the RESET button.
The  VTR  is  set  to  the  default  setting  mode,  and
the  default  setting  screen  is  displayed  on  the
video monitor.2
Press  the  MENU-UP  button  or  MENU-DOWN
button  to  move  the  cursor  to  the  LOAD
position, and press the SET button.
The  VTR  is  set  to  the...

23
Press  the  MENU-UP  button  or  MENU-DOWN
button  to  move  the  cursor  to  NO,  and  press
the SET button.
The menu protection function is now released.3
Set  the  LOCAL/MENU/REMOTE  switch  to  the
LOCAL or REMOTE position.
The unit is now set to the menu protection mode.
When  the  LOCAL/MENU/REMOTE  switch  is  set
to  the  MENU  position,  the  VTR  is  not  set  to  the
menu  setting  mode,  and  “MENU  PROTECTED”
appears on the video monitor screen.

If,  while  the  menu  protection  mode...

24
SYSTEM
Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
12 SYS H (HD) 0550
:
1100
:
1650–550
:
0:
550For adjusting the system phase of the HD SDI output (in 27 ns steps).
–: The phase is moved ahead.
+: The phase is moved back.
The underlining denotes the factory mode.
14 SYS SC (SD) 0000
:
0108
:
0216–108
:
0:
108For adjusting the system phase of the VIDEO output and SD SDI output.
(Total variable range: ±180 degrees or more)
–: The phase is moved ahead.
+: The...

25

OIf  the  PAGE  button  and  the  DATA+  or  DATA–  button  are  pressed  together  when  menu  item  No.007
(CHARA  H-POS)  and  No.008  (CHARA  V-POS)  are  being  set,  the  counter  display  appears  temporarily
while these buttons are held down to enable the settings to be checked.
It  is  also  possible  to  use  the  DATA+  button  and  DATA–  button  while  holding  down  the  PAGE  button  to
perform the settings while at the same time checking their actual status.
OEven  when  “OFF”  is...

26
009 CHARA TYPE
0000
0001WHITEW/OUTFor setting the superimposed display and the menu display type.
0: White characters are displayed on a black background.
1: White characters with black borders are displayed.
020 SYS FORMAT
0000
00011080i720pFor  setting  the  format  used  to  record  and  play  back  signals  including  the
HD REF signal.
0: 1080i mode
1: 720p mode
022 PB FORMAT
0000
0001MANUALAUTOFor setting the format used for playing back the tape.
0: The menu item No.020 (SYS FORMAT) setting is...

27
101 SHTL MAX
0000
0001
X8.4
X16
For  setting  the  maximum  shuttle  mode  speed  when  using  the  external
controller connected to the 9-pin remote connector.
0: 8.4anormal speed
1: 16anormal speed
104 REF ALARM
0000
0001
OFF
ON
For setting whether the warnings are to be indicated when the REF VIDEO
has not been connected.
1: No warnings are indicated.
2: Warnings are indicated by the STOP lamp which flashes.
152HUMID OPE
0000
0001OFFON
For setting the operation to be performed when condensation has...

28
OPERATION
Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
The underlining denotes the factory mode.
Setup Menus
154 AUTO BACK
0000
0001
0002OFF
REC-PALLFor  setting  the  operation  method  used  for  the  frame-to-frame  continuity
function.    (This  item  activates  the  AUTO  BACK  function  to  rewind  the  tape
for  several  seconds  in  order  to  ensure  a  smooth  continuity  between  the
recorded images.)
0: No AUTO BACK operation.
1: In  the  REC  PAUSE...

29
400 STILL TIMER 0000
0001
0002
0003
0004
0005
0006
0007
00080.5S
5S
10S
20S
30S
40S
50S
1min
2minFor setting the time taken before the unit is set to the tape protection mode
when it has been left in the STOP or STILL mode.
(Unit: S = seconds, min: minutes)
401 SRC PROTECT
0000
0001STEPHALFFor setting the tape protection mode operation when the unit has been left
in the STILL mode.
0: STEP FWD
1: STANDBY OFF (half loading)

When STEP FWD has been set, the unit is automatically transferred to the...

30
500 VITC BLANK
0000
0001
BLANK
THRU
For  setting  whether  to  output  the  VITC  signal  to  the  position  set  by  menu
item No.501 (VITC POS-1) and No.502 (VITC POS-2).
0: The VITC signal is not output.
1: The VITC signal is output.

This  setting  is  only  effective  for  SD  outputs  (VIDEO  output  and  SD  SDI
output).
501 VITC POS-1 0000
:
0006
:
001010L
:
16L:
20LFor setting the position where the VITC signal is to be inserted.

OThe  same  line  as  that  set  for  menu  item  No.502...