Panasonic Digital Hd Video Cassette Recorder Ajhd1400 Operating Instructions

31
Setup (initial settings) (continued)
System frequency switching
Procedure for shifting the system frequency
To shift the system frequency execute the following operations.
1Change the set value of menu item No. 25 SYSTEM
FREQ. For the method to change the set value, refer to
Setting method using the on-screen menus (page 27) .
Once the set value is changed, the outer frame of the
display part of SYSTEM FREQ and the characters in
SYSTEM on the front display panel start flashing.
2Press the MENU...

32
Setup menus
Menus which are displayed
The menus displayed differ depending on the setting selected for menu item No.25 SYSTEM FREQ.
NO. ItemMenu No.25 SYSTEM FREQ
59/60 23/24 50i/25P 25 (HD) 25 (SD) 50 (HD) 50 (SD)
05ENCODER SEL
06 V LEVEL CTRL
12SYS H (HD)
14 SYS SC (SD)
15VO SYS H (SD)
16 SD SYS H (SD)
18SCH COAR (SD)
19 SCH FINE (SD)
20AV  P H A S E
25 SYSTEM FREQ
26HD SYS H ADVNoNoNoNoNoNo
001 LOCAL ENA
002TA P E  T I M E RNoNoNoNoNo
003 REMAIN SEL
005SUPER
006 DISPLAY SEL
007CHARA H-POS
008 CHARA...

33
Setup menus (continued)
NO. ItemMenu No.25 SYSTEM FREQ
59/60 23/24 50i/25P 25 (HD) 25 (SD) 50 (HD) 50 (SD)
184TYPE-B END
190 V IN SEL INH No No No No No
191A IN SEL INHNoNoNoNoNo
202 ID SEL
302CONFI EDITNoNoNoNoNo
303 AUD EDIT IN No No No No No
304AUD EDIT OUTNoNoNoNoNo
307AFTER CUE-UP No NoNoNoNo
320EDIT RPLCE1NoNoNoNoNo
321 EDIT RPLCE2 No No No No No
322EDIT RPLCE3NoNoNoNoNo
323 EDIT RPLCE4 No No No No No
324EDIT RPLCECNoNoNoNoNo
400 STILL TIMER
401SRC PROTECT
402 DRUM STDBY
403STOP PROTECT
500 VITC...

34
Setup menus (continued)
NO. ItemMenu No.25 SYSTEM FREQ
59/60 23/24 50i/25P 25 (HD) 25 (SD) 50 (HD) 50 (SD)
661BK LVL (SD)
662 V LEVEL
663C LEVEL
664 HUE
665SETUP LVL
676 BLK CLIP No No No No No
680CC (F1) BLANKNoNoNoNoNoNo
681CC (F2) BLANK NoNoNoNoNoNo
682VO SETUP (HD) (For AJ-HD1400P)NoNoNoNoNo
683 VO SETUP (SD) (For AJ-HD1400P) No No No No No
684EDH (SD)NoNo
685 ESR MODE (SD) No No No No No
686CCR MODE (SD)NoNoNoNoNo
687 SDI INDEX 0 No No No
689COMP MODENoNoNoNoNoNo
690 UMID REC No No No No No...

35
Setup menus (continued)
Video output signal adjustments
The control matrix for the adjustments is shown in the table
below.
This function is not available for IEEE1394 digital output.
When “CMPNT” has been selected as the menu item No.650 
STYLE setting
AJ-HD1400: 
Only adjustments of the setup menu items are
performed.
External encoder remote controller/AJ-HD1400:
Adjustments can be performed from both the external
encoder remote controller and setup menus.

zUse the AJ-ER50 as the external encoder...

36
Setup menus (continued)
SYSTEM
“_____” indicates the factory setting.
No./Item Description of setting
05
ENCODER
SELFor setting whether to perform the various 
adjustments for the video output signals using this 
VTR or using an external encoder remote controller.
0001LOCAL:
The various adjustments for the video output 
signals are performed using this VTR.
0002  BOTH :The various adjustments for the video output 
signals are performed using both this VTR and an 
external encoder remote controller....

37
Setup menus (continued)
SYSTEM (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
BASIC
“_____” indicates the factory setting.
No./Item Description of setting
25
SYSTEM
FREQFor selecting the system frequency.
For details, refer to “Procedure for shifting the system 
frequency (page 31).
000059/60:
The 59.94 Hz or 60 Hz system frequency is 
selected.
0001  50i/25P:
The 50 Hz or 25 PsF system...

38
Setup menus (continued)
BASIC (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

When the signal format to be output is set to other than
DVCPRO HD and an external device is connected to the DV
connector, the following settings are recommended.
zMenu No. 022 PB FORMAT: 
MANUAL
zMenu No. 023 FORMAT SEL: 
Format of the tape that is inserted in the unit
“_____” indicates the factory setting.
No./Item...

39
Setup menus (continued)
BASIC (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
Formats for playback
Depending on how the menu item No.020 SYS FORMAT,
No.022 PB FORMAT and No.023 FORMAL SEL settings are
combined, the formats of the tapes played back by the unit
differ as shown in the table below.

zWhen the tape is ejected, the format follows the one
selected...

40
Setup menus (continued)
OPERATION
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
No./Item Description of setting
100
SEARCH 
ENATo set the transition method to search mode (stick 
operation).
0000STICK:Shift to the search mode when the SEARCH button 
is pressed or when the stick is operated.
0001 KEY :Do not shift to the search mode unless the 
SEARCH button is...